Why Did Geely Switch to Corun Shares?

What brand of tires does the Audi A4L use?

Audi A4L original tires are randomly assigned based on the production batch, with Michelin being the most commonly used, followed by brands like Continental, Hankook, and Goodyear. Below is a detailed introduction to the functions of car tires: 1. Support the entire weight of the vehicle, bear the car's load, and transmit forces and moments in other directions; 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passing performance; work together with the car suspension to mitigate impacts during driving and dampen resulting vibrations; 3. Prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.

2

4

Share

How much horsepower does the Mustang 2.3T have?

This car has 299 horsepower. Below are the specific details about the Mustang's 2.3-liter engine: 1. The Mustang is a sports car under Ford, equipped with two engines: a 2.3-liter turbocharged engine and a 5.0-liter V8 naturally aspirated engine. 2. The Mustang's 2.3-liter turbocharged engine is the same as the one used in the Focus RS, which is a four-cylinder turbocharged engine. 3. The Mustang's 2.3-liter turbocharged engine delivers a maximum power of 220 kW and a maximum torque of 434 Nm. 4. The maximum power is achieved at 5,400 rpm, and the maximum torque is reached at 3,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 5. The engine is paired with a 10-speed automatic transmission (10AT).

9

4

Share

What are the items included in a car's first maintenance service?

New car first maintenance usually involves simple tasks like changing the engine oil and oil filter, followed by a comprehensive vehicle inspection. The details are as follows: 1. Tightening nuts: During the first maintenance, all nuts on various parts of the new car will be inspected. Considering the break-in period of a new car, some screws may not be particularly tight. During the first maintenance, all screws will be tightened to the specified torque. 2. Chassis inspection: The car will be lifted to check the chassis for any scratches, underbody impacts, corrosion, or oil leaks. 3. Tire inspection: Mainly to check if tire wear is consistent. If one tire shows significantly more wear, it may indicate potential wheel misalignment. Additionally, tire pressure will be checked and adjusted as needed. 4. Computer system check: A computer system diagnosis will be performed to comprehensively detect any car issues, after which technicians will conduct repairs based on the identified problems.

16

5

Share

How long should you avoid rain after replacing the windshield?

After replacing the windshield, avoid rain for three days. The method for replacing the windshield is as follows: 1. First, use a flat-head screwdriver to slowly remove the black protective strips around the windshield, then remove the wipers and the protective cover under the windshield; 2. Thread a steel wire through the sealant under the windshield, with one person inside the car and one outside, pulling back and forth to slowly separate the sealant until all the sealant around the entire windshield is loosened; 3. Use a small blade to slowly scrape off any remaining black sealant on the car, then use sandpaper for final cleaning until the metal frame is exposed. Wipe the dust off the newly purchased windshield with a cloth; 4. Apply polyurethane sealant to the frame of the car windshield in a triangular or diamond shape, making it as thick as possible to ensure a tight bond with the glass; 5. When installing the windshield, note that there are two small brackets on the car to support the windshield. Make sure the windshield rests on these small supports. Slowly press it into place, then apply another layer of polyurethane sealant around the windshield to attach the black protective strips; 6. After installation, reattach the wipers and the lower protective panel, and use transparent tape to secure the windshield to the roof. It's best not to drive immediately after completion; instead, let the car sit for two or three days to allow the sealant to fully cure.

5

3

Share

Why Has the Steering Wheel Become Heavier Than Before?

There are several reasons why the steering wheel has become heavier than before: 1. Insufficient power steering fluid: Power steering fluid is a medium oil used in the car's power steering pump, which helps transmit steering force and provides cushioning. The power steering fluid needs to be replaced regularly, and any leaks should be checked. When the power steering fluid is insufficient, the steering wheel will feel heavy and stiff. 2. Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, leading to greater friction and making steering more difficult, resulting in a heavy steering wheel. This is not conducive to driving safety. 3. Toe-in: Toe-in can also affect the car's steering. The concept of toe-in is quite complex, but simply put, it helps the steering wheels automatically return to the correct position, ensuring the car can drive straight stably. If there is an issue with this aspect, it can also cause the steering wheel to feel heavy. 4. Steering gear or power steering pump failure: The steering gear and power steering pump are also critical components that affect the car's steering. Any malfunction in these two important parts can lead to steering difficulties. Issues such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked.

19

4

Share

Should the Toyota C-HR use 95 or 92 octane gasoline?

Toyota C-HR uses 92 octane gasoline, with a fuel tank capacity of 50 liters. To ensure proper engine performance, please use the fuel grade specified by the manufacturer. The difference between 95 and 92 octane gasoline lies in the ratio of n-heptane and isooctane. 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline consists of 95% isooctane and 5% n-heptane. The Toyota C-HR is a compact SUV under the Toyota brand, equipped with a 2.0-liter naturally aspirated engine across all models. This engine, coded M20C, delivers 171 horsepower and a maximum torque of 203 Nm. In terms of suspension, the Toyota C-HR features a MacPherson independent front suspension and an E-type multi-link independent rear suspension.

17

2

Share

Why Did Geely Switch to Corun Shares?

What brand of tires does the Audi A4L use?

How much horsepower does the Mustang 2.3T have?

What are the items included in a car's first maintenance service?

How long should you avoid rain after replacing the windshield?

Why Has the Steering Wheel Become Heavier Than Before?

Should the Toyota C-HR use 95 or 92 octane gasoline?

How to Reset the Maintenance Reminder on the Boyue?

What to Do If the Vehicle License Has Expired for Two Years?

How to Fold the Rearview Mirror of Volkswagen Bora?

Does 'off' on the dashboard indicate on or off?