···
Log in / Register

Why Change Engine Oil During Car Maintenance?

4 Answers
HarmonyMarie
09/03/25 4:21am

Engine oil serves four primary functions: cooling, lubrication, cleaning, and sealing, playing a crucial role in ensuring the proper operation of the engine. As the engine operates over time, the oil becomes contaminated due to factors such as high-temperature oxidation, wear particles from mechanical components, and fuel vapor corrosion. Additionally, if the oil level falls below the specified minimum and affects engine performance, it can cause severe damage to the engine. Therefore, it is essential to change the engine oil during routine car maintenance.

Was this review help?
4
5
Share
VonReid
09/15/25 5:57am

I use my car daily for commuting, and my driving experience tells me that regular oil changes are of utmost importance. Engine oil acts as both a lubricant and coolant for the engine. When fresh, it flows smoothly, protecting internal metal components like pistons and bearings from friction and wear. Over time, the oil accumulates dust, combustion residues, and metal particles, gradually becoming dirty and thicker, significantly reducing its lubricating effectiveness. Once, I was too busy with work and delayed the oil change for 5,000 kilometers. The engine started making unusual noises, and I felt a lack of power when climbing hills, which eventually cost me thousands in repairs. Regular oil changes not only keep the car running quieter and more fuel-efficient but also prevent major repairs and extend the vehicle's lifespan. Experts recommend changing the oil every 5,000 to 10,000 kilometers, depending on driving conditions and oil type. This habit saves both hassle and money—why not do it?

Was this review help?
11
1
Share
Expand All
OLeilani
10/29/25 6:37am

After tinkering with cars for so many years, I deeply understand that changing engine oil is no trivial matter. Fresh oil plays multiple roles in the engine: lubricating metal surfaces to reduce wear, carrying away heat to prevent overheating, and cleaning up carbon deposits and impurities. However, over time, the oil oxidizes and deteriorates, becoming thick and dirty, which weakens its protective properties and accelerates component aging. Checking the oil's color and viscosity during changes can help detect issues early. For instance, sludge buildup can clog oil passages and affect heat dissipation. With each fresh oil change, the engine runs smoother, naturally reducing fuel consumption. If car owners neglect this, the engine may fail prematurely, leading to costly repairs. Regular maintenance is a smart choice that can prevent unnecessary troubles.

Was this review help?
19
2
Share
Expand All
LeSophie
12/12/25 6:48am

I'm a financial expert and consider oil changes as a long-term investment. Engine friction is high during operation, and fresh oil acts like blood for lubrication and cooling; dirty oil accelerates internal wear, skyrocketing repair costs. Regular oil changes boost efficiency and save fuel expenses—replacing every 5,000 kilometers is like spending small to prevent major disasters. In the long run, protecting your car means protecting your wallet.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

What Causes Inaccurate Car Fuel Gauge Readings?

Here are the symptoms and causes of inaccurate car fuel gauge readings: 1. The fuel gauge pointer fluctuates irregularly. This is related to the design of the fuel pump that reflects fuel levels, which cannot uniformly indicate gasoline consumption. Such uniform changes are difficult to achieve and cannot be altered through repairs or part replacements. 2. The fuel gauge suddenly drops to zero. This occurs when the fuel level sensor becomes contaminated and is not cleaned promptly. It's important to note that gasoline contains many impurities, and the fuel level sensor, constantly submerged in it, can become polluted over time, directly affecting the accuracy of the readings. 3. The fuel gauge scale rises. This happens when the linkage between the fuel level sensor and the float gets stuck, preventing the float from moving up and down normally. As a result, the fuel level sensor does not change, causing the fuel gauge pointer to remain fixed at a certain position.
16
3
Share

What is the emission standard for a 2008 car?

2008 cars comply with National II, National III, and partially National IV emission standards. Here are methods to check your vehicle's emission standard: 1. Check the environmental protection label on your vehicle - the standard is clearly marked on its back; 2. Bring the original or copy of your vehicle registration certificate to the environmental protection window of the vehicle management office or the local motor vehicle pollution control center for inquiry. Additional information: The National III standard refers to China's third-stage vehicle emission standard, equivalent to the Euro 3 emission standard. New vehicles at that time were required to be equipped with an OBD (On-Board Diagnostics) system. When emissions fail to meet Euro 3 standards due to factors like fuel quality, the OBD system will automatically trigger an alarm and switch to default mode, preventing normal engine operation.
17
4
Share

How are China 4 and China 5 classified?

Here are the classification standards for China 4 and China 5: 1. China 4 standard: Compared to China 3, the emission after-treatment system has been upgraded in China 4, reducing pollutant emissions by 50% to 60% compared to China 3. 2. China 5 standard: Compared to China 4, nitrogen oxide emissions are reduced by 25%, and additional restrictions on non-methane hydrocarbons and PM emissions are added to reduce air pollution and prevent smog. Below is a rough method to distinguish the emission standard based on the vehicle's registration year: 1. Most vehicles registered after 2008 are China 4; 2. Vehicles registered in 2007 may be either China 3 or China 4; 3. Vehicles registered before 2007 are mostly below China 4, i.e., China 2 or China 3; 4. Vehicles registered before 2005 are mostly China 2.
2
0
Share

What does the minimum ground clearance of a car mean?

The minimum ground clearance of a car refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass over obstacles such as stones and stumps without collision, and it is one of the geometric parameters of the car's passability. The following are the effects of the minimum ground clearance on driving: 1. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; 2. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
5
1
Share

What Causes Car Engine Shaking During Ignition?

Reasons for car engine shaking during ignition: 1. Poor fuel quality: In winter when temperatures are low, during cold starts the engine block temperature is too low for proper fuel atomization, causing insufficient mixing of fuel and air in the combustion chamber, leading to difficult starts and severe body shaking; 2. Spark plugs: The gap between spark plug electrodes gradually widens, reducing ignition energy and causing poor fuel atomization; 3. Ignition coils: Aging ignition coils, or aging/sparking high-voltage wires from spark plugs, result in decreased ignition energy; 4. Carbon buildup on engine valves and intake manifold: Since carbon deposits can absorb some fuel, the ECU makes incorrect judgments - while it controls injection of 100 units of fuel-air mixture, only 90 units actually enter the cylinder. Even if these 90 units burn completely, they still can't provide sufficient power, making shaking inevitable.
17
0
Share

How long does a diesel engine need to break in after an overhaul?

After an overhaul, a diesel engine requires approximately 60 hours of break-in under vehicle load. The following precautions should be noted: 1. Avoid high-intensity engine operation: After a diesel engine overhaul, maintain a vehicle speed below 100 km/h and keep the engine speed under 3,000 RPM. 2. Gradually accelerate and brake gently: During normal driving, ensure smooth acceleration and gentle braking to prevent the impact of sudden braking from affecting the engine. 3. Use high-quality diesel and engine oil: After an overhaul, use high-quality diesel and engine oil during the break-in period to ensure the engine remains in good condition. 4. Avoid overloading the vehicle: Overloading during the break-in period can cause damage to the engine. Generally, the vehicle's load should not exceed 70% of its rated capacity after an engine overhaul.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.