Why can the Nissan Livina key unlock the door but not start the car?

1 Answers
Daisy
07/30/25 4:17am
There are several reasons why the Nissan Livina key can unlock the door but not start the car: Battery depletion: When the voltage during startup is lower than the minimum operating voltage of the computer, the engine computer will not function, preventing the car from starting. In this case, the battery should be recharged or replaced. Spark plug failure: Spark plugs are prone to damage, and short circuits in high-voltage lines can prevent them from igniting. Additionally, poor-quality spark plugs can also cause startup failure. It is recommended to replace the spark plugs in such situations. Starting circuit malfunction: If there is only a slight click sound during startup with no further response, it is likely due to a stuck starter relay. In this case, pressing the tail of the electromagnet to force it forward can connect the starting circuit and allow the engine to start.
Was this review help?
3
4
Share
More Forum Discussions

Which Department Handles the Road Transport Permit?

Road transport permits need to be processed at the Ministry of Transport. The "Road Transport Operation License" is a legal certificate issued by the Ministry of Transport for operating road transport. Below are specific details about the road transport permit: 1. Definition: The road transport permit is a valid document proving the legal operation of commercial vehicles. It also serves as the primary record for vehicle inspection and rewards or penalties for operators. The permit must be carried with the vehicle at all times and is valid nationwide within its expiration period. 2. Notes: Both the main certificate and the supplementary pages of the road transport permit must be complete, with matching serial numbers, aligned seals, and consistent information. Otherwise, the permit will be considered invalid.
17
1
Share

Can Red Antifreeze and Green Antifreeze Be Mixed?

Green antifreeze and red antifreeze should not be mixed. Antifreeze of different colors may have variations in chemical properties and compositions. Even if the primary ingredients are the same, the secondary components and formulation ratios can differ. Mixing them can lead to chemical reactions, causing hazards such as sedimentation, scaling, and corrosion, which may affect the engine's lifespan. How to choose antifreeze: The basic indicators for antifreeze are its freezing and boiling points. Market-available antifreeze comes in specifications such as -15°C, -25°C, -30°C, and -40°C freezing points. It is generally advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. How to determine if antifreeze is low: Check the antifreeze warning light on the dashboard. If it lights up, it likely indicates low antifreeze levels, though it could also be due to excessively high engine temperatures. Inspect the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If the antifreeze is below the minimum mark, it indicates a deficiency.
6
5
Share

How to Clean Fabric Seats?

Fabric seats can be cleaned using the following methods: 1. Use a vacuum cleaner: Remove dust and debris with a vacuum cleaner. If dust is caked onto the fabric or difficult to remove with the vacuum, gently brush the area with a soft-bristled brush before vacuuming again. 2. Use a dry cloth: Wipe the fiber surface with a soft, dry cloth to thoroughly dry the seat fibers. If the fabric remains dirty, use mild soapy water and warm water to wipe it down, then dry with a hair dryer. 3. Use a cleaning agent: If stains in the fabric seats cannot be removed by vacuuming, use a fabric cleaner. Test the cleaner on a less visible area first to ensure it does not damage or age the fabric, and follow the instructions on the product for proper use.
18
5
Share

How Many Kilometers Should Car Tires Be Replaced?

Under normal usage, tires should be replaced every 5 years or 80,000 kilometers. If the tires are damaged during use, such as from impacts, the need for immediate replacement should be determined based on the specific condition of the tire. Most tire treads can be safely used after repair if damaged, but if the sidewall is damaged, it is recommended to replace the tire directly. Below are some considerations regarding tire maintenance and usage: Safe Storage: All tires should be stored in a cool, dry, and dark indoor environment, away from sunlight, oil, acid, and hydrocarbons, as these can erode the tires. Due to pressurization, liquids may penetrate the tire's inner liner into the carcass, which can lead to sudden tire damage. Tire Maintenance: Regular tire rotation, choosing appropriate tread patterns, routine maintenance, periodic checks of tire pressure, timely repair of damages, and frequent removal of stones and foreign objects from the tread are all important factors in extending tire lifespan.
1
2
Share

How to Remove Bumper Guards?

Bumper guards can be cleaned using methods such as wet towels or surfactants. Below are the removal methods for bumper guards: 1. Ordinary dust: For regular dust, simply wipe with a tissue or wet towel. After cleaning with water, dry with a dry towel. 2. Stubborn stains: For stubborn stains, use a surfactant for cleaning. It has excellent wetting, penetrating, and dissolving capabilities, quickly permeating to remove dirt. 3. Glue residue: For glue residue, first wipe slowly with hot water, then clean with a surfactant. Repeat several times for thorough cleaning.
20
1
Share

When should the windshield washer fluid be replaced?

There is no fixed interval for replacing car windshield washer fluid. Owners can typically check the fluid level and top it up as needed when it runs low. Below are detailed explanations about car windshield washer fluid: 1. Composition: Windshield washer fluid, commonly known as glass water, is a consumable in vehicle maintenance. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. 2. Cleaning performance: Windshield washer fluid is formulated with multiple surfactants and additives. Surfactants generally have functions such as wetting, penetrating, and solubilizing, thereby achieving the purpose of cleaning and removing dirt. 3. Antifreeze performance: It can significantly lower the freezing point of the liquid, thus providing antifreeze protection and quickly dissolving frost.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.