Why Can't You Open the Window When a Car Falls into Water?

2 Answers
OMartin
07/25/25 6:10am
Because opening the window can cause water to flood into the cabin, leading to the risk of drowning. Here are the relevant details: 1. Car Window: The car window is an essential part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Depending on the installation position of the glass, car windows include: front and rear windshields, side windows, and door windows. The design, structure, and quality of the windows significantly impact the driver's visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics. 2. Precautions: If your vehicle falls into water, stay calm, call for rescue immediately, and prepare for escape.
Was this review help?
5
3
Share
ReidMarie
08/10/25 6:04pm
When a car falls into water, if you hastily open the window, the speed at which water rushes in will double, causing the car to sink rapidly, leaving no time for escape. I have studied car escape techniques for several years, and the principle of water pressure is crucial: when the car first enters the water, the external water pressure is high while the internal air pressure is low. Opening the window is like opening a floodgate—the cabin fills with water in seconds. At that point, the door won’t open at all because you can’t push against the immense external water pressure, and your body is trapped, struggling to breathe. The correct approach is to unbuckle your seatbelt (don’t forget to release it!), stay calm, and wait for the water to slowly seep in until it reaches about halfway up the door. Once the internal and external pressures are roughly balanced, you can then open the window or door to climb out. Carrying a car window-breaking hammer is also useful for smashing the window in emergencies. Drivers should learn some survival skills during routine car maintenance—this can save lives, especially for those who frequently drive on highways or cross bridges.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What Causes Vehicle Steering Deviation?

Reasons for vehicle steering deviation include: 1. Uneven tire pressure; 2. Inconsistent camber angles on both front wheels; 3. Abnormalities in the steering system; 4. Deformation of front shock absorber springs in the suspension system, leading to uneven force distribution; 5. Uneven wear of tread patterns. Solutions to correct steering deviation are: 1. Check tire pressure to ensure consistency; 2. Replace shock absorber springs on both sides; 3. Inspect the suspension for deformation or misalignment; 4. Examine steering system components for loose bearing connections; 5. Perform a four-wheel alignment based on the vehicle's wheel parameters.
2
4
Share

What Are the Causes of Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power during startup; 2. Loose connections between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc; 4. Insufficient throttle application or rapid clutch release; 5. Malfunctions in the intake system, ignition system, or fuel system. The hazards of manual transmission shudder during startup include: 1. Damage to the spark plugs, leading to poor ignition; 2. Increased carbon buildup in the fuel injectors; 3. Throttle blockage; 4. Accelerated aging of engine components; 5. Damage to the clutch pressure plate; 6. Increased engine load.
11
0
Share

What happens to a car after replacing the roof?

Replacing the roof allows the car to operate normally. Roof repair scenarios: After a car roof is impacted—whether from active or passive collisions, whether the front, middle, or rear of the vehicle is involved—the roof will suffer varying degrees of damage, resulting in distortions, bulges, or dents. Rollover accidents can cause large-scale collapse and severe deformation of the roof. Heavy objects falling from above may also lead to roof collapse. Key considerations: The outcome depends on the quality of the repair. If installation is meticulous and thorough, there should be no issues. However, improperly installed screws or components may cause unusual noises or air leaks from the AC vents, affecting normal driving.
20
5
Share

What is the method for replacing brake pads on a car with an electronic parking brake?

1. Locate the jacking point and use a jack to lift the area where the brake pads need to be replaced off the ground; 2. Remove the tire; 3. Use a screwdriver to spread the caliper; 4. Remove the caliper screws and take out the existing two brake pads; 5. Install the new brake pads; 6. Tighten the caliper screws with a wrench; 7. Reinstall the tire and remove the jack. The electronic parking brake is an electronic parking brake system, which integrates the temporary braking during driving and the long-term braking after parking, and realizes the parking braking technology through electronic control.
18
4
Share

What is the issue with fault code C0035?

C0035 is an ABS system fault code, indicating a power supply error in the right front wheel speed sensor. Here are the relevant details: 1. In the ABS anti-lock braking system, the wheel speed sensor transmits the wheel's speed as an electrical signal to the control module, helping the system determine when the tire might lock. 2. Function of the ABS system: The anti-lock braking system enhances safety during emergency braking while driving. In other words, vehicles without ABS may experience wheel lock-up during emergency braking, making the steering wheel unresponsive, thereby increasing the risk of severe accidents.
19
5
Share

How to Replace the Battery in a Mercedes-Benz B180 Diesel Key?

Mercedes-Benz B180 Diesel Key Battery Replacement Method: 1. Press the small button on the back of the key to pull out the mechanical key; 2. Insert the mechanical key into the slot at the flap position, and the key cover will pop open; 3. Remove the old battery and replace it with a new one, ensuring the correct battery type is used with the positive side facing outward. The Mercedes-Benz key will indicate low battery in two ways: 1. When pressing the ignition switch, the dashboard will display a message to replace the key battery; 2. When pressing the lock or unlock button on the key, the indicator light on the key will dim or not light up, signaling the need to replace the key battery.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.