Why can't the wiper return to the lowest position?

1 Answers
CadenDella
07/29/25 5:30pm
If the wiper cannot return to the lowest position, it may be due to a problem with the wiper motor, poor battery or circuit contact. It is recommended that the owner go to a repair shop for inspection and repair as soon as possible. The following is some information about wipers: 1. Wipers, also known as windshield wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. 2. Due to legal requirements, almost all vehicles are equipped with wipers. Rear windows of vehicles such as hatchbacks and SUVs are also equipped with wipers. In addition to cars, other means of transportation, such as trains and trams, are also equipped with wipers. Some engineering machinery, such as cranes, are also equipped with wipers.
Was this review help?
20
2
Share
More Forum Discussions

How to Upgrade the In-Car Navigation System of Volkswagen Lavida?

Enter the navigation interface, click on the menu, then select function settings, and click on 'About Navigation'. Inside, there is a navigation information button. Click on it to view the serial number and version information. The system will prompt whether to upgrade. Select 'Yes', and a dialog box for starting the upgrade will pop up. First, select Amap Navigation, then choose to upgrade. Here is some extended information about car navigation: 1. The built-in GPS antenna in the car navigation system receives data from at least 3 of the 24 GPS satellites orbiting the Earth, thereby determining the car's current location. The navigation host matches the position coordinates determined by the GPS satellite signals with the electronic map data to accurately locate the car on the electronic map. 2. The car navigation system mainly consists of two parts: the navigation host and the navigation display terminal. Based on this, it can achieve various functions such as driving navigation, route recommendations, information queries, and playing AV/TV. The driver only needs to watch the display screen, listen to voice prompts, and operate the remote control to achieve the above functions, making driving effortless and comfortable.
10
1
Share

Can Spark Plugs Be Cleaned and Reused?

Spark plugs can be cleaned and reused if they show minimal wear. Generally, they should be replaced every 40,000 to 60,000 kilometers under normal maintenance conditions, but this may vary depending on the brand and engine type. It is recommended to follow the user manual for specific guidance. Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs between 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood and remove the plastic engine cover. Disconnect the high-voltage ignition wires, marking each wire according to its corresponding cylinder to avoid confusion. Use a spark plug socket to remove each spark plug one by one. During removal, check for any external debris such as leaves or dust, and ensure the area is thoroughly cleaned. Insert the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to fully tighten it. Reinstall the high-voltage ignition wires in the correct firing order and reattach the cover.
9
3
Share

What should I pay attention to when driving on the highway for the first time?

Precautions for driving on the highway for the first time are as follows: 1. Pay attention to traffic rules. 2. Check the vehicle before entering the highway and understand the speed limits. The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. 3. Pay attention to signs, markings, and warning signs. 4. When exiting the highway, merge lanes in advance. When you see the roadside signs indicating 1.5km or 1km, merge into the outermost lane to prepare. 5. Maintain a safe distance. Keeping a proper distance is the most important factor for driving safety. Many novice drivers, due to lack of experience, may misjudge the distance, follow too closely, and may not be able to brake in time.
20
2
Share

How to Drive a Manual Transmission Car?

Manual transmission driving method is as follows: 1. When starting the vehicle, let it idle for about half a minute, then depress the clutch, shift into first gear, simultaneously press the foot brake with your right foot, release the handbrake with your right hand, and slowly release the clutch; 2. While driving, when the speed reaches 15-20 km/h, shift into second gear, and when the speed reaches 25-30 km/h, shift into third gear; 3. To decelerate and stop, apply the brake until the vehicle speed drops below a safe speed, then depress the clutch and shift into neutral. Manual transmission driving techniques include: 1. Seating posture technique; 2. Double-clutch downshifting technique; 3. Clutch separation technique; 4. Gear shifting timing; 5. Speed control through gear selection technique; 6. Hill start technique; 7. Avoid prolonged use of half-clutch state.
18
0
Share

What Causes the Steering Wheel Squeaking and Friction Noise in the Elantra?

The causes of steering wheel squeaking and friction noise in the Elantra are as follows: 1. Excessive gear clearance in the steering mechanism or excessive clearance in the universal transmission device. 2. Damage to the shock absorber pressure bearing. Related information is as follows: 1. During daily driving, avoid turning the steering wheel while the vehicle is stationary; instead, steer only after the vehicle is in motion. When the vehicle is parked, ensure the steering wheel is centered to prevent excessive load on the suspension system and tires. 2. The Elantra 2020 1.4T Dual-Clutch XuanDong Vitality Edition is a compact car introduced by Beijing Hyundai, with dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, and a wheelbase of 2700mm. It is equipped with a 1.4T turbocharged engine with a maximum power of 95.6kW, paired with a 7-speed dual-clutch transmission.
9
3
Share

How to distinguish between BMW F chassis and G chassis?

The method to distinguish between BMW F chassis and G chassis is to observe the models of BMW, as different chassis are used for BMW's sedan types and SUV models. The English name for BMW is Bavarian Motor Works. Relevant information about the automotive chassis is as follows: 1. The chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. 2. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, and to receive the power from the engine to make the car move and ensure normal driving. 3. The transmission system of the chassis is mainly composed of the clutch, gearbox, universal joint, drive shaft, and drive axle.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.