Why can't the seat of the Mercedes-Benz C-Class be adjusted suddenly?

How much can you exceed the speed limit on highway interval speed measurement?

Highway interval speed measurement allows exceeding the speed limit by 10%. No penalty will be imposed for exceeding the speed limit within 10% on highway intervals. Relevant introduction about highway interval speed measurement is as follows: Introduction to highway interval speed measurement: The so-called interval speed measurement refers to the method of detecting the average speed of motor vehicles passing through the road section (speed measurement interval) between two adjacent speed measurement monitoring points. For example, the speed limit range of a certain highway section is 10 kilometers, and the speed limit of this section is 120 kilometers per hour. If the vehicle travels for 5 minutes or more, its average speed will be lower than 120 kilometers per hour, meeting the speed limit requirements. Precautions for driving with interval speed measurement: Check the vehicle condition before driving and plan in advance, fasten the seat belt after getting on the car, drive according to the lane speed limit on the highway, maintain a safe distance between vehicles, drive into the nearest service area to rest when tired, and avoid fatigue driving.

6

3

Share

What Causes the Speedometer Needle to Shake?

The reason for the up-and-down shaking of the speedometer needle is due to a malfunction in the vehicle's oxygen sensor. It is necessary to promptly visit the car's 4S store or a repair shop to inspect or replace the oxygen sensor to resolve the issue of the tachometer needle shaking. How the Speedometer Works: When the car is in motion, the drive shaft rotates the permanent magnet. The magnetic field lines of the permanent magnet generate eddy currents on the aluminum cup. The interaction between these eddy currents and the magnetic field of the permanent magnet creates torque that overcomes the spring force of the spiral spring, causing the aluminum cup to rotate the pointer by a certain angle. Types of Speedometers: Common vehicle speedometers are generally divided into three types: purely mechanical, mechanical-electronic, and purely electronic. Among these, purely mechanical speedometers have largely exited the market, mechanical-electronic speedometers are the most widely used, and purely electronic speedometers are typically employed in the bus industry. Function of the Car Speedometer: The car speedometer displays the vehicle's speed changes, including the instantaneous speed, engine RPM, and accumulated mileage. The driving speed is usually indicated by a pointer that continuously changes while driving. Other information is typically displayed using rolling numbers similar to those on an electric meter.

14

5

Share

What are the precautions for Subject 2?

Precautions for the Subject 2 driving test include adjusting the position, finding the correct angle, avoiding stalling, and slowing down. Adjusting the position: The first thing to do after getting in the car is to adjust the seat and rearview mirror to a comfortable position and state, and fasten the seat belt. Finding the correct angle: When parallel parking, remember to find the correct angle. The steering wheel should be turned quickly, and your reaction should be fast, coordinating with the car's speed. Avoiding stalling: On the slope stop, remember to pull the handbrake. When starting, always turn on the left turn signal and release the handbrake. Keep the clutch steady, press the accelerator while releasing the clutch to avoid stalling or rolling back. For the right-angle turn, react quickly to turn after finding the correct point, and always coordinate with the car's speed to avoid deviation. Slowing down: The safest way to navigate the curve (S-turn) is to slow down. When reversing into the parking space, control the speed carefully, find your reference point, and make minor adjustments if you notice any deviation in the rearview mirror.

6

5

Share

What Causes the Upper Radiator Hose to Be Hot While the Lower Hose Remains Cold?

The reason the upper radiator hose is hot while the lower hose remains cold is due to a faulty thermostat that fails to open or air pockets in the cooling system, which disrupt the coolant circulation. Faulty Thermostat: If you plan to remove the thermostat, you should block the small coolant circulation loop to ensure all coolant flows through the radiator for cooling. Vehicle cooling systems utilize a combination of air and liquid cooling, where engine heat is transferred to the radiator via coolant, and then dissipated by natural airflow and the cooling fan. Air Pockets in the Cooling System: If the connection between the cooling system's antifreeze reservoir and the radiator is not tightly sealed, it can lead to coolant leakage.

16

4

Share

How Long Can a Car Engine Run Continuously?

Several thousand hours. During endurance testing, it can run continuously for several thousand hours. Introduction to Car Engines: It is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), electric motors, etc. The term engine can refer to both the power generation device and the entire machine including the power unit (e.g., gasoline engine, aircraft engine). Classification of Car Engines: Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others.

7

2

Share

Can You Drive While Warming Up the Engine?

You can drive while warming up the car engine. Precautions for driving during warm-up: It is permissible to drive while the engine is warming up, and you may drive at idle speed. However, avoid accelerating until the engine coolant reaches normal operating temperature and the idle speed stabilizes. This is because the vehicle is not fully warmed up, and the engine oil remains viscous when cold, preventing it from fully lubricating all components. Accelerating during this period may cause internal engine wear. Explanation of engine warm-up: Warming up the engine refers to the process of preheating it. The purpose is to let the engine run initially to achieve better lubrication and reach its optimal working condition.

11

1

Share

Why can't the seat of the Mercedes-Benz C-Class be adjusted suddenly?

How much can you exceed the speed limit on highway interval speed measurement?

What Causes the Speedometer Needle to Shake?

What are the precautions for Subject 2?

What Causes the Upper Radiator Hose to Be Hot While the Lower Hose Remains Cold?

How Long Can a Car Engine Run Continuously?

Can You Drive While Warming Up the Engine?

What is the voltage of a new energy vehicle's cigarette lighter?

What is the Changan CS75 ambient lighting tutorial?

What is the maximum power of a new energy vehicle?

Can motorcycles be inspected in other regions?