Why can't the Roewe i5 start with one-button ignition?

1 Answers
JuliaMarie
07/25/25 12:16pm
Here are the reasons why the Roewe i5 cannot start with one-button ignition: 1. The steering wheel is in a locked position: The solution is simple. Just turn the steering wheel forcefully while turning the key, and the steering wheel lock will usually be released quickly, allowing the car to start instantly. 2. The gear was not shifted back to P (Park) when parking: Imagine if the car could start in D (Drive) or R (Reverse), the sudden movement of the vehicle at ignition would pose a significant safety hazard. Therefore, for automatic transmission vehicles (AT, CVT, AMT), manufacturers preset this mode and repeatedly emphasize in the manual: Ensure the gear is in the P position when starting. 3. The smart key battery is low: Even though the key is inside the car, the dashboard may display 'Key matching error.' This situation is likely due to the smart key battery being low, and the start system cannot detect the weak signal emitted by the key. It is recommended to place the smart key on the start button and then press the button to start the car.
Was this review help?
11
3
Share
More Forum Discussions

What causes the Chery Tiggo to have sluggish acceleration and a muffled sound?

Reasons for the Tiggo engine's sluggish acceleration include: 1. Carbon deposits: Carbon deposits can occur in the cylinders, throttle body, spark plugs, and intake system. These areas are directly related to the engine's power output. When there is excessive carbon buildup inside the engine, the vehicle's ignition energy decreases, intake efficiency drops, and ultimately, the engine's power is reduced, resulting in sluggish acceleration and a muffled sound. 2. Fuel system issues: Using an incompatible fuel grade can lead to reduced power output. Alternatively, if the fuel tank vent is blocked, or if the fuel tank switch, fuel filter, or fuel lines between the tank and carburetor are partially clogged, the required fuel supply may not be met, causing a lean air-fuel mixture and sluggish engine acceleration. 3. Intake problems: If the air filter is not cleaned regularly and becomes clogged, insufficient air intake can result in an overly rich air-fuel mixture, reducing engine power. For vehicles equipped with a turbocharger, if the turbocharging system malfunctions, the engine may remain sluggish and fail to deliver full power even when the throttle is applied. 4. Engine overheating: Engine overheating can impair lubrication, increase mechanical wear, and reduce engine power, leading to sluggish acceleration.
18
1
Share

How often should ETC be charged?

ETC devices come in two types: wired charging and solar panel charging. Solar-powered ETC devices do not require charging, while wired charging ETC devices need to be charged using a charger. Generally, an ETC device can last 2-3 months on a single charge. Both types of ETC electronic tags have internal batteries. Solar-powered ETC devices do not require charging during daily driving, and their lithium batteries can last up to 3 years under normal use. However, for those who do not use ETC frequently, it is recommended to charge the ETC device every 3 months to effectively mitigate the impact of natural battery discharge on its lifespan. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, a valid ID of the agent is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required, and the applicant must be between 18 and 60 years old, with the vehicle registered under their name. How ETC works: Through the onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at toll stations. Using computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay tolls. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by reducing noise, exhaust emissions, and pollution as vehicles pass through toll stations without stopping; Cost-saving: Reduces vehicle wear and fuel consumption by minimizing the frequency of starting and braking, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
11
3
Share

How to reset the maintenance light on Maxus G50?

Turn on the ignition, then press and hold the reset button on the instrument panel. Turn off the ignition while keeping the reset button pressed. Continue holding the reset button until the clock and mileage display on the instrument panel completely disappear, then release the button. Press and hold the reset button again, turn on the ignition, and the maintenance reminder light will start flashing. Keep holding the reset button until the maintenance reminder stops flashing, then release the button to complete the maintenance light reset. Additional information is as follows: 1. Maintenance reminder: The original purpose of the vehicle maintenance light is to remind the owner to perform maintenance as soon as possible. When the maintenance reminder light comes on, the owner should schedule maintenance promptly. After maintenance is completed, the service staff will use a diagnostic tool to reset the maintenance light. The fastest and most accurate method to clear the maintenance reminder light is by using a professional diagnostic tool, which individuals typically don't possess. It's recommended to have the reminder light cleared at a 4S shop after maintenance or at an external repair shop. 2. Maintenance reminder function: This serves only as an auxiliary function. The detailed maintenance intervals should still follow the maintenance regulations. If the car battery is disconnected for an extended period, the system may not correctly calculate the time for the next maintenance due.
20
0
Share

Where to Add Windshield Washer Fluid in Mercedes-Benz C-Class?

Mercedes-Benz C-Class windshield washer fluid is added at the rear side of the engine hood pressure strut, with a washer symbol on the cap. The washer fluid capacity for the Mercedes-Benz C-Class is 4L, and it should be added appropriately based on the remaining amount. Windshield washer fluid is a consumable item with no fixed replacement cycle, depending on the driver's frequency of use. Precautions for adding windshield washer fluid: Concentrated windshield washer fluid needs dilution: If the purchased windshield washer fluid is concentrated, it must be diluted before use. Carefully read the instructions for the windshield washer fluid and dilute it according to the specified ratio in the instructions. Exercise caution during use. Pay attention to the capacity of the windshield washer fluid: Different brands of windshield washer fluid can be used in varying ranges, with some suitable for 1L and others for 5L. For more accurate measurement, it is recommended to use a measuring cup or bottle with volume markings to achieve better preparation. Different types of windshield washer fluid for winter and summer: Summer windshield washer fluid mainly provides anti-insect effects due to the abundance of mosquitoes in summer; in winter, it is best to choose some anti-freeze windshield washer fluid because of the cold weather that can easily cause freezing.
13
1
Share

What are the solutions for high fuel consumption in Peugeot 508?

Dongfeng Peugeot 508's methods to address excessive fuel consumption include tire pressure adjustment, enhanced vehicle maintenance, avoiding engine idling, and keeping the vehicle with low wind resistance. Tire pressure adjustment: Insufficient tire pressure increases driving resistance, leading to higher fuel consumption. Conversely, appropriately increasing tire pressure within the specified range helps reduce fuel consumption. Enhanced vehicle maintenance: Vehicle adjustments and maintenance affect engine performance and driving resistance. Statistics show that poorly maintained engines can increase fuel consumption by 10% to 20%. Owners should regularly visit auto repair shops for routine maintenance, such as checking tire pressure, wheel alignment, and adjusting brake pad and drum clearance. Avoiding engine idling: Engine fuel consumption during idling is much higher than during normal driving. Therefore, it's best to turn off the engine if the vehicle is not in use for a long time. During cold starts, warming up the engine should not exceed 1 minute, and maintaining low-speed driving for a few minutes is sufficient. Keeping the vehicle with low wind resistance: At high speeds, a significant portion of power is used to overcome wind resistance. Therefore, avoid installing cargo on the roof or making unreasonable modifications. It is estimated that adding a roof rack increases fuel consumption by 5%. Opening windows at high speeds significantly increases air resistance, leading to higher fuel consumption.
1
5
Share

Can I proceed if the light turns red after crossing the stop line?

Vehicles that have already crossed the stop line when the red light turns on can continue to proceed, because the red light is preceded by a yellow light, and vehicles that have passed the stop line during the yellow light can continue to move. If the red light turns on before a vehicle crosses the stop line, it is prohibited to proceed. According to Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' regarding motor vehicle and non-motor vehicle signal lights: When the green light is on, vehicles are allowed to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line can continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signal lights, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. When the red light is on, right-turning vehicles can proceed provided they do not obstruct the passage of other vehicles or pedestrians. Article 44 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' states that on roads with two or more motor vehicle lanes in the same direction, the left lane is the fast lane and the right lane is the slow lane. Motor vehicles in the fast lane should travel at the speed designated for that lane. Vehicles that cannot reach the designated speed should use the slow lane.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.