Why can't the reversing camera on the VV5 be opened?

[Jared]

1. Camera damage or obstruction: If the camera is damaged, the image cannot be uploaded to the computer, and thus it won't display. In this case, you need to go to a repair shop or a 4S store for maintenance, and if necessary, replace the camera. If it's just blocked by foreign objects, simply remove them. 2. Display screen damage: When the display screen remains black and fails to start or shows distorted images, it is usually damaged. This situation requires inspection and repair at a repair shop or a 4S store. 3. Poor wire contact: If you frequently drive on rough roads, the bumpy environment may cause the internal wires to loosen or detach. When the wire contact is poor, the image from the camera cannot be transmitted to the main unit, and the reversing camera won't display. This requires disassembling the center console panel for inspection. 4. No power: When the car's lights or multimedia system are used for an extended period while the engine is off, the battery may drain. When the power is insufficient or depleted, the car's multimedia system will not function, and the reversing camera won't display. In this case, simply recharge or replace the battery.

[AngeloDella]

I've encountered this issue of the reversing camera not working quite often. Dust or mud covering the lens at the camera position affects the image display, especially after rainy days or long-distance driving. Connection issues are also common; the plug near the trunk area is prone to loosening or getting pinched, leading to signal interruption. Occasionally, the car's infotainment system may freeze or crash, requiring a restart by turning off and on the ignition. If the problem persists, check if the relevant fuse in the fuse box has blown; an aging camera can also cause this, especially since the lens often gets impacted during reversing. Replacing a new one might cost a few hundred yuan. It's recommended to first clean the lens and check the connections before considering repairs, to avoid compromising safe driving.

[AbigailDella]

I've experienced the issue of reversing camera malfunction several times. After starting the car, the screen goes black or doesn't respond, mostly due to a dirty camera or obstruction by the license plate frame; incorrect rearview mirror angle can also cause no signal. The function might be accidentally turned off in system settings, and restoring factory settings in the car's menu can solve it. Aging or cracked wiring can lead to poor contact, and tightening the connectors yourself can provide a temporary fix; frequent use during reversing can wear out the camera, making it cost-effective to replace it with an original part. Last time during maintenance, I had the wiring checked to extend its lifespan, and remember to regularly clean the lens to prevent dust and dirt.

[JeffreyFitz]

It's really frustrating when the reversing camera suddenly goes black. The camera itself might be broken or the lens could be covered in dust, blocking the view. Especially when there are obstacles near the reversing radar, the system might not respond at all. Sometimes, the infotainment system gets stuck due to software bugs—turning off the engine and waiting for 10 minutes before restarting often fixes it. Also, check the settings menu to ensure the reversing assist function hasn't been turned off. It's recommended to upgrade the infotainment system to the latest version to fix known bugs. If the camera is water-damaged or severely damaged, it's best to replace it—don’t hesitate to send it for repair to avoid further delays.