Why can't the rear door of the BMW X1 be opened from the inside?

How to Use Auto Start-Stop in Automatic Transmission Vehicles

When the auto start-stop system shuts off the engine, quickly shift to P gear and release the brake pedal to keep the engine off. For safety considerations, pulling the handbrake and releasing the brake pedal while in D gear won't maintain engine shutdown - the system prioritizes quick acceleration readiness, so even shifting to N gear will restart the engine. Therefore, most vehicles' start-stop systems are designed to maintain engine shutdown only when quickly shifting from D to P gear. Key points: 1. The start-stop system is essentially automakers' "workaround" to meet stringent global emission and fuel economy regulations. Most systems operate with noticeable jerkiness, compromising driving comfort. 2. Proper usage and maintenance can deliver fuel savings, though the payoff period is lengthy. The two critical components - AGM batteries and reinforced starters - are costly. Improper use may cause vehicle malfunctions.

17

0

Share

What is the process for registering an imported vehicle?

The process for registering an imported vehicle is as follows: 1. First, drive the vehicle to the local Entry-Exit Inspection and Quarantine Bureau to obtain the "Inspection Certificate for Imported Motor Vehicles." Then, fill out the application, which requires providing documents such as the customs declaration form, commodity inspection certificate, vehicle purchase invoice, and ID card/organization code certificate. 2. Pay the vehicle purchase tax, fill out the purchase tax application form, and provide the customs declaration form, locally issued commodity inspection certificate, tax payment copy of the vehicle purchase invoice, and ID card/organization code certificate. Next, pay the fee by card. The relevant authority will issue two tax booklets to the owner. 3. Purchase compulsory motor vehicle traffic accident liability insurance (third-party liability insurance) that includes the current year's vehicle and vessel tax. 4. Drive the vehicle with all the required documents to the vehicle management office. First, queue up for the vehicle inspection. Prepare the stamped vehicle identification number (VIN) and engine number as required by the vehicle management office. Inform the inspection officer that you are applying for vehicle registration. After the inspection, the owner will receive an inspection form. 5. Take all the documents: the inspection form, the purchase tax booklet (duplicate), and the third copy of the insurance policy (retained by the traffic police department). Then, proceed to the vehicle management office to complete the registration process.

1

4

Share

How Often Should Run-Flat Tires Be Replaced?

Run-flat tires should be replaced within 5 years. The replacement cycle for tires is introduced as follows: 1. Tire shelf life: The sidewall of the tire will have a four-digit number indicating the manufacturing date of the tire, with the first two digits representing the week and the last two digits representing the year; 2. The usage of tires should generally not exceed 3 years, and the mileage should not exceed 60,000 kilometers. Although slightly exceeding the service life and mileage is not a big issue, the low temperatures in winter and rain in summer can make the tire's wet grip and dry handling performance inadequate; 3. Pay more attention to the sidewall: As the tire rubber gradually ages, deep cracks will appear on the tire sidewall. However, as long as the sidewall has not been impacted and the cords are not broken, the tire can continue to be used; 4. The triangular marking symbol on the tire sidewall can help car owners find a protrusion in the tread groove, which can determine the actual wear limit of the tire. That value should be greater than 1.6mm (millimeters).

3

2

Share

How to Use the Manual Shift Mode on the Envision?

How to use the manual shift mode on the Envision: Simply shift the gear lever to the manual mode. There are + and - buttons on the gear lever, and shifting the lever can increase or decrease the speed. Below is some relevant information about the Envision: 1. Body Dimensions: Length 4694mm, width 1839mm, height 1686mm, with a wheelbase of 2750mm. 2. Powertrain: Equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive. 3. Suspension: The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.

14

4

Share

What is the difference between parking lights and hazard lights?

Parking lights and hazard lights differ in their applicable situations and activation methods. Below are the specific details: Applicable situations: Parking lights are highly effective when temporarily parking in dark environments to prevent passing pedestrians, bicycles, and other traffic participants from colliding with the vehicle, or when temporarily parking and leaving on narrow provincial, county, or rural roads at night. When temporarily parking, hazard lights should be turned on, and in some cases, warning signs should also be placed. When waiting for someone or retrieving items during temporary parking, hazard lights should be activated to alert others that a vehicle is present. Activation methods: When temporarily parking and turning off the engine at night, move the turn signal control lever to the left or right turn position to activate the parking lights. The choice between left or right parking lights can be determined based on the vehicle's parking position. The hazard light switch is independent and is usually a red triangle. Pressing it once activates the hazard lights. Hazard lights are also commonly referred to as emergency flashers.

9

3

Share

How to deal with a dent in the car?

Car dents can be repaired through traditional sheet metal work. Here is some related information about sheet metal: 1. Characteristics: Sheet metal has the advantages of being lightweight, high strength, conductive (can be used for electromagnetic shielding), low cost, and good for mass production. It is widely used in fields such as electronic appliances, communication, automotive industry, and medical equipment. 2. Definition: Sheet metal is a processing technique, and there is no complete definition for it yet. According to a definition from a foreign professional journal, it can be defined as: Sheet metal is a comprehensive cold working process for thin metal sheets (usually below 6mm), including cutting, punching/cutting/compositing, bending, riveting, splicing, forming (such as car bodies), etc. Its significant feature is the uniform thickness of the same part.

16

5

Share

Why can't the rear door of the BMW X1 be opened from the inside?

How to Use Auto Start-Stop in Automatic Transmission Vehicles

What is the process for registering an imported vehicle?

How Often Should Run-Flat Tires Be Replaced?

How to Use the Manual Shift Mode on the Envision?

What is the difference between parking lights and hazard lights?

How to deal with a dent in the car?

What are the differences between Subject 1 and Subject 4 in the driver's license test?

How to Identify an Earth Dreams Engine?

What is Wheel Alignment for Vehicles?

Can a Lost BMW Key Be Located?