Why Can't the Rear Car Door Be Opened from the Inside?

2 Answers
Johnson
07/25/25 4:58pm
Car rear doors may fail to open due to reasons such as the child lock being activated, malfunctioning of the door lock cable, or deformation of the door hinge and lock post. Below is an analysis of the reasons why a car's rear door might not open: 1. Child lock is activated: Most vehicle rear doors are equipped with a child lock, marked by a child symbol near the door edge. If accidentally activated and the door is closed, the door will not open. 2. Malfunctioning door lock cable: A faulty cable directly affects the lock mechanism's ability to open. In such cases, replacing the door lock cable is necessary to restore door functionality. 3. Deformation of door hinge or lock post: External force can cause the door hinge or lock post to deform, another common reason for door malfunction. Addressing this issue requires dismantling the door and hinge to replace them with new components, ensuring the door operates normally.
Was this review help?
1
5
Share
DelVivian
08/11/25 10:01pm
As a long-time car owner, I often encounter the frustrating issue of rear doors not opening. I remember one time when my family couldn't push the door open from the back seat, causing quite a panic. Later, I discovered the child safety lock was engaged. This is a clever design to prevent children from opening doors while the car is moving, but it can easily be activated by accident—it's usually a small switch or lever located on the edge or inner frame of the rear door. I've taught myself to check it regularly to avoid repeating the mistake. Mechanical failures in the door lock can also cause problems, such as rust jamming the internal handle linkage system or a loose connecting rod. In cold weather, doors can also freeze shut. In short, if this happens, don't force it—check the safety lock first. If that doesn't solve the issue, head to a repair shop promptly. After all, delaying a trip is a minor inconvenience compared to compromising safety.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the BYD S7?

10.6 liters. Below is the relevant introduction: Introduction: The BYD S7 is BYD's new mid-to-large-sized SUV. The S7 features a three-dimensional and vivid design, with sharp yet elegant lines that perfectly balance aerodynamics; the eagle-eye headlights are striking, complemented by window frame bright trims and chrome-plated grilles with undulating contours, presenting an overall grand and high-quality appearance. It surpasses vehicles in the same class by several levels in terms of configuration. Exterior: From an exterior perspective, the new BYD S7's design shares little resemblance with the current BYD S6. The BYD S7 adopts a brand-new front face design, with a U-shaped grille integrated with the headlights. The large chrome-plated grille design is more stylish, and the headlights will incorporate linear LED daytime running lights. Compared to the criticisms of the current BYD S6's exterior, the S7 has stronger originality and a more mature design.
8
2
Share

How many seconds does the Emkoo take to accelerate from 0 to 100 km/h?

When the GAC Emkoo unlocks SPORT+ and activates launch mode, its starting RPM is around 2100, achieving the fastest acceleration time of 6.95 seconds. This performance is on par with the Civic and is considered highly credible. Below is more related information: Configuration of the GAC Emkoo: The Emkoo is equipped with the all-new third-generation 1.5TGDI engine from the GAC Power series, delivering a maximum power of 130kW. With GCCS technology at its core, it integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large-inertia balance shaft, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L per 100km. The transmission efficiency is as high as 96%, with a shift time of just 0.2 seconds. Acceleration performance: In the 0-100km/h acceleration test, the fastest recorded time was 6.95 seconds. Supported by the GPMA architecture, the Emkoo achieves the lowest center of gravity among domestic brands at 550mm, a drag coefficient as low as 0.26cd, and the application of over 66.5% high-strength steel. Combined with the excellent lightweight design capabilities of the GPMA architecture, it achieves a perfect balance between safety and lightweight.
14
2
Share

What are the causes of water ingress on the floor of the 2014 Bora's cabin?

Possible causes include rust perforation of the car's chassis, clogged drainage channels, damaged seals, or water accumulation in the sunroof. Here are the related explanations: 1. Rust perforation of the chassis: Water can enter through the wheels, so it's necessary to carefully inspect and seal or install liners. 2. Clogged drainage channels: The rainwater holes in the drainage channels below the front windows are blocked by debris. 3. Damaged seals: During rainy weather, water can enter the car floor through the doors. Check if the door seals are damaged or ineffective and replace them promptly. 4. Sunroof water accumulation: Prolonged water accumulation in the sunroof can block the drainage tubes, causing water to flow into the car floor from below the center pillar. Therefore, timely inspection and unclogging are essential.
15
2
Share

What is the fuel tank capacity of the Bin Yue?

The fuel tank capacity of the Bin Yue is 45 liters, which is the officially announced data. Owners who have purchased the Bin Yue can also check this information on the vehicle's configuration sheet. The Bin Yue uses 92-octane fuel, with a fuel consumption of 6.1 to 6.3 liters per 100 kilometers. A full tank of fuel can cover a distance of 714 to 738 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is recommended to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
2
2
Share

What Steps Are Included in Vehicle Inspection?

Vehicle inspection includes the following steps: 1. Emission testing; 2. Checking for traffic violations; 3. Paying a deposit; 4. Exterior inspection; 5. On-site testing; 6. Final review; 7. Paying fees and receiving the inspection sticker. Annual inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is conducted once a year to ensure the vehicle meets the safety technical requirements for operation. The inspection items include: 1. Checking whether the engine, chassis, body, and their accessories are clean, complete, and functional, and whether the paint is uniform and aesthetically pleasing; 2. Testing the vehicle's braking performance, steering control, lights, exhaust, and other safety features; 3. Verifying whether the vehicle has been modified or altered, and whether the registration details on the driving license, license plate, and vehicle records match the actual condition of the vehicle.
9
0
Share

What is the fuel tank capacity of the BAIC Huansu S3?

The fuel tank capacity of the BAIC Huansu S3 is 45 liters. Maintenance of the fuel tank is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and steam valves, also inspect whether the vent holes are clear. The filter screen at the fuel filler port should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to avoid fuel spillage while driving. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient. Methods to open the fuel tank: Mechanical key opening: This method is commonly seen in some rugged off-road vehicles, but it is generally not used in modern family cars. In-car switch method: The location of the in-car fuel tank switch varies among different car models. Always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.