···
Log in / Register

Why can't the Magotan play music via Bluetooth?

5 Answers
SanViolet
07/29/2025, 04:57 AM

After connecting the phone via Bluetooth, there is no sound from the music. You need to disconnect and reconnect the Bluetooth for pairing. If there is no sound when playing music via Bluetooth after plugging a data cable into the audio system's USB port during Bluetooth device connection, set the host to play music via USB. Extended information: The methods are as follows: 1. Establish a pairing relationship between the phone and the car's Bluetooth device. Enable the Bluetooth function on both the phone and the car's Bluetooth device, and set the phone's Bluetooth to be visible to all. 2. Search for Bluetooth devices on the phone, select and match the found device for connection. The pairing password is four zeros. After successful pairing, the connection is established. 3. You can set the host to play music via USB. After setting, music can be played normally (Note: Some phones may not support this function).

Was this review help?
15
2
Share
OPreston
08/12/2025, 03:40 AM

I previously encountered an issue with my Magotan where Bluetooth music playback had no sound, and after some troubleshooting, I found there were quite a few root causes. The most common one is improper pairing between the phone and the car's system—you need to delete the old Bluetooth records and reconnect. Once, I switched to a new phone and forgot to pair it, and there was absolutely no sound. Also, you should check whether both the phone's volume buttons and the car's volume settings are turned up. If the car's system hasn't been updated for too long, bugs can occur—I got mine fixed after upgrading the system at the 4S shop. Another thing to watch out for is whether the Bluetooth music option gets cut off by navigation voice prompts, which is particularly sneaky. If none of these are the issue, then you might need to check if there’s a problem with the car’s multimedia unit or the connecting cables—in such cases, it’s best to have a professional technician inspect the fuses and wiring.

Was this review help?
15
3
Share
Expand All
LaElisa
10/05/2025, 10:45 PM

I think the issue of the Magotan's Bluetooth not playing music mainly comes down to three levels: The most basic is the connection level—is the phone's Bluetooth switch definitely turned on? Are there other devices interfering in the car's Bluetooth list? The middle level is about permissions—when the phone pops up a request to access contacts and media, failing to click 'Allow' will prevent music playback. My friend couldn't play music because they didn't grant media permissions. The deeper level might involve hardware compatibility, especially with older Magotan models not supporting certain Android devices well; switching to an iPhone immediately works. If all else fails, try restoring the car's system to factory settings—although you'll need to readjust seat memory, it often works.

Was this review help?
17
0
Share
Expand All
EmmanuelFitz
11/18/2025, 11:12 PM

Don't rush to repair your car when Bluetooth music playback fails, try this trick first: restart your phone and car infotainment system then reconnect! It works 80% of the time. Secondly, remember to check the 'Media Audio' option for Magotan in your phone's Bluetooth settings - many people only connect the phone function. If it's intermittent, it's likely wireless interference; try turning off other Bluetooth devices in the car. The latest situation is that many car owners need to upgrade their infotainment software to support new phone protocols - just download the upgrade package from the official website. If it still doesn't work, you'll need to check the AUX module.

Was this review help?
16
2
Share
Expand All
OKiara
01/09/2026, 12:49 AM

Recently helped a neighbor solve the Bluetooth issue with their Magotan, and discovered a few key points: If the phone's system is too old, it won't connect to the new car system—upgrading his Huawei Mate 20's system fixed the sound issue. The car's Bluetooth antenna is near the armrest, so placing the phone too far away causes lag. In the multimedia settings, the media source needs to be switched to Bluetooth, as many people leave it on the radio. The most surprising discovery was that his dashcam was interfering with the Bluetooth signal—unplugging it solved the problem. It's recommended to rule out these soft faults first, as it's much easier than dismantling the car.

Was this review help?
16
5
Share
Expand All
More Forum Discussions

What Causes the Steering Tie Rod to Bend?

Steering tie rods generally bend due to excessive vehicle load. When encountering uneven road sections, the forces on both tires become uneven, causing the tie rod to bend. This is quite common for heavy-duty trucks, as the two front wheels are controlled by a single tie rod, making it prone to bending on rough roads. Introduction to Steering Tie Rods: Steering tie rods are divided into steering straight rods and steering tie rods. The steering tie rod is part of the vehicle's steering trapezoid and plays a role in transmitting steering force. Steering Tie Rod Failure Warning Signs: When the vehicle is driven at medium or higher speeds, there is a periodic noise from the chassis. In severe cases, the cab and doors may shake, and the steering wheel vibrates intensely, even causing numbness in the hands.
19
0
Share

What is the symbol for front window defogging in a car?

The symbol for front window defogging in a car is a square frame containing three upward-curved arrows arranged side by side. Here are specific details about the defogging symbol: Defogger: The defogger switch control can reduce moisture, fog, and frost on the front and rear glass surfaces, improving the driver's visibility to some extent. If the defogger is manually turned off, it needs to be pressed again before the next use. Besides using the defogging button, turning on the air conditioning can also help, but there are techniques for using cold or warm air, with direct effects. Here is additional information: Notes on car defogging: When it suddenly rains outside while driving, the temperature drops, and the windshield temperature also decreases. The water vapor inside the car condenses into fog on the windshield, obstructing the view. In such cases, turning on the air conditioning for defogging is necessary.
15
0
Share

Is It Dangerous to Store Windshield Washer Fluid in the Trunk?

Storing windshield washer fluid in the trunk is safe, as it does not evaporate easily. However, make sure the cap is tightly secured. Windshield washer fluid is a consumable liquid used for cleaning vehicle windshields. Additional Information: 1. Types and Selection of Windshield Washer Fluid. Windshield washer fluid is a cleaning solution for car windshields, available in summer-type, antifreeze-type, special-effect antifreeze-type, and concentrated-mixing-type varieties. It serves functions such as cleaning, lubrication, antifreeze, and anti-fog. When purchasing, choose based on your living environment—for example, opt for antifreeze-type in winter. 2. Functions of Windshield Washer Fluid. Using it while driving keeps the windshield transparent, extends the lifespan of the glass and wipers, prevents window icing in winter, and reduces static electricity on the windshield.
17
1
Share

What Causes Turbocharger to Glow Red?

It is normal for the turbocharger to glow red. When the engine exhaust temperature reaches 730°C, the turbocharger housing begins to glow. During normal engine operation, the maximum exhaust temperature ranges between 850°C and 880°C. The turbocharger housing can withstand temperatures up to 1050°C, so glowing below 880°C is considered normal. Symptoms of a damaged turbocharger include: 1. Rapid Acceleration: Hearing a whistling sound from the exhaust valve above 1750 RPM is normal. 2. Odometer: If the turbo is damaged, there will be unusual noises. 3. Warning Light: If the turbocharger is damaged, the engine warning light will illuminate. 4. Unusual Odor: This can lead to incomplete combustion in the engine, resulting in strong exhaust odors.
11
5
Share

What are the techniques for pressing the accelerator when driving an automatic transmission car on a steep slope?

Automatic transmission cars require pressing the accelerator deeply when going uphill, allowing the transmission to downshift. Only when the transmission downshifts can the torque on the tires increase. When climbing a slope, you can also use the L (Low) or M (Manual) gear to keep the transmission in a lower gear. There are three common types of automatic transmissions found in cars: AT (Automatic Transmission), CVT (Continuously Variable Transmission), and DCT (Dual Clutch Transmission). The DCT is based on manual transmission technology and has a structure similar to manual transmissions. The CVT is a relatively simple automatic transmission, consisting of only two cone pulleys and a steel belt. The steel belt can move along the cone pulleys, enabling the transmission to vary speed and torque. The AT transmission is a mature and widely used automatic transmission, containing multiple planetary gears that facilitate speed and torque variation.
5
4
Share

What are the symptoms of a bad automatic transmission clutch plate?

Symptoms of a bad automatic transmission clutch plate: 1. The clutch plate starts to slip; 2. Shaking and abnormal noises occur during gear shifting. Automatic transmissions that have clutch plates are dual-clutch transmissions and AMT transmissions. AMT transmissions have been phased out, and cars using AMT transmissions are rarely seen nowadays. Dual-clutch transmissions are developed based on manual transmissions. Compared to manual transmissions, this type of transmission has an additional set of clutch and gear-shifting control mechanisms. Prolonged use of the clutch plate increases wear. When the clutch plate wears to a certain extent, slipping occurs. Clutch plate slipping reduces the transmission efficiency of the gearbox, leading to insufficient power in the car. Additionally, during aggressive driving, a burnt smell may be noticed inside the car when the clutch plate slips. If this happens, it is essential to replace the clutch plate promptly. When replacing the clutch plate, always go to a 4S shop and use genuine parts, as they offer better reliability and durability.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.