Why can't the Koleos' rearview mirrors automatically fold?

1 Answers
StHarley
07/29/25 6:19pm
Electric folding failure of exterior rearview mirrors, excluding mechanical and electronic control reasons, the common causes for electric folding function failure mainly include: 1. The battery is disconnected or dead: In this case, the exterior rearview mirrors must be reset to function properly. The specific reset method is to manually operate the folding button. 2. After setting 'fold mirrors when locking the car', manual folding was performed: In this scenario, the exterior rearview mirrors will not automatically unfold the next time the vehicle is unlocked. You need to enter the vehicle and press the button on the door to manually unfold the exterior rearview mirrors.
Was this review help?
2
5
Share
More Forum Discussions

What are the reasons for the frequent illumination of the engine malfunction indicator light?

Engine malfunction indicator light frequently illuminates due to: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Low-quality fuel and engine oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug failure, ignition coil failure; 6. Fuel pump failure, clogged fuel lines; 7. Clogged air conditioning filter. The engine is the device that provides power to the vehicle, and its maintenance methods include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning the radiator scale; 4. Regularly removing carbon deposits; 5. Timely replacement of the vehicle's three filters; 6. Maintaining reasonable engine speed.
20
5
Share

What are the solutions for an overheated car engine?

The solutions for an overheated car engine are: 1. Let the vehicle idle; 2. Open the hood to increase air circulation; 3. Check for leaks in the radiator connecting pipes and use waterproof tape to seal any leaks; 4. Add coolant in a timely manner. The causes of an overheated car engine are: 1. Lack of coolant; 2. Blockage due to scale or dirt in the engine; 3. Damage to the cylinder head gasket; 4. Loose fan belt, insufficient airflow through the radiator; 5. Loose water pump belt, reduced coolant flow; 6. Excessive concentration of antifreeze coolant; 7. Thermostat failure; 8. Clogged cooling radiator.
13
3
Share

What is the principle of a four-wire brake light switch in cars?

The principle of a four-wire brake light switch in cars is that power passes through a fuse to the brake switch. When the brake pedal is pressed for braking, the switch connects, sending current to the brake lights and the high-mounted brake light, forming a circuit through the negative wire connected to the vehicle body. Inside the switch, one contact closes while another opens, switching during operation, and the cruise control computer monitors the switch state. The classification of four-wire brake lights varies depending on different conditions: according to the materials used, they are divided into gas car brake lights and LED car brake lights; according to the base, they are categorized into P21W, W21W, P27W, and W16W. The function of a four-wire brake light is to alert vehicles and pedestrians behind when braking, thereby improving driving safety.
2
1
Share

What kind of engine oil is best for a Subaru BRZ?

For a Subaru BRZ, it is recommended to use 5W40 fully synthetic engine oil. The functions of engine oil include lubrication, cleaning, cooling, rust prevention, and sealing. Taking the 2020 Subaru BRZ as an example, it is a 2-door, 4-seater hardtop sports car with the following dimensions: length 4240mm, width 1775mm, height 1320mm, wheelbase 2570mm, fuel tank capacity 50L, trunk capacity 243L, and curb weight 1237kg. The 2020 Subaru BRZ is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 200PS, maximum power of 147kW, and maximum torque of 205Nm, paired with a 6-speed manual transmission.
1
2
Share

What Are the Reasons Why the Front Oxygen Sensor Is Prone to Damage?

The reasons why the front oxygen sensor is prone to damage are: 1. Poor fuel quality; 2. Spark plug failure; 3. Damaged catalytic converter. The impacts of a damaged front oxygen sensor include: 1. Excessive exhaust emissions; 2. Deterioration of engine performance; 3. Engine stalling at idle; 4. Inaccurate engine operation and reduced power; 5. The engine control unit (ECU) being unable to accurately assess the air-fuel mixture condition; 6. Affecting the normal operation of the catalytic converter. The front oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system. It is a key component for controlling vehicle exhaust emissions, reducing environmental pollution, and improving fuel combustion quality in the engine. It is installed on the engine exhaust pipe.
12
2
Share

How Long Does Car Painting Take?

The duration of vehicle painting depends on the size of the area to be painted: 1. Small areas: Small area painting can be completed in half a day, while a full car paint job takes two days. 2. Baking or natural drying: Generally, in summer when temperatures are high, the paint can dry in two days; in winter, the drying time depends on the temperature and can take up to four to seven days. If baking is used, it only takes two hours. Precautions for car painting are as follows: 1. If the car has just been painted, avoid contact with water and dust on the freshly painted areas. 2. It's best not to drive the car out in rainy weather, as the fresh paint is still delicate and can be marked by rain, some of which cannot be removed by polishing. It's advisable to park in a garage at night. 3. Avoid contact of the freshly painted areas with chemicals and oil stains.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.