Why can't the keyless start car key be detected?

1 Answers
DiTessa
07/29/25 3:49pm
The reasons why the keyless start car key cannot be detected are as follows: 1. First, check if the car key has power. If it's just a dead battery, replacing it with a new one should solve the issue. 2. If the problem persists after replacing the battery, check if there are any signal interferences around. Sometimes, placing a mobile phone near the smart key can also affect the car door's detection. 3. If it still doesn't work, try using a spare key. If the spare key works, then the control unit of the previously used key might be malfunctioning. 4. If the spare key also cannot be detected, then there might be an issue with the vehicle's fuse or the key's recognition system.
Was this review help?
7
0
Share
More Forum Discussions

What is the RPM of the Verano at 120 mph?

The RPM of the Verano at 120 mph is around 2600-2800, while at 130 km/h it is approximately 3000 RPM. At 170 km/h, the RPM reaches around 4000. Factors affecting RPM: The motor's RPM is related to factors such as the type of motor. For AC synchronous and asynchronous motors, it depends on frequency and pole count. Higher frequency results in higher RPM, while more poles lead to lower RPM. For DC or commutator motors, RPM is influenced by rotor voltage and excitation current—higher rotor voltage increases RPM. Additional notes on engine RPM: Engine RPM is determined by multiple factors, including mechanical transmission structure, mechanical transmission resistance, combustion system supply, and vehicle load. The engine's RPM affects the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with RPM.
2
2
Share

How to Adjust the Time on a Cruze?

The method to adjust the time on a Cruze: Press CONFIG on the central control settings, then enter the vehicle parameter settings, where the first option is for adjusting the time and date. The Cruze is a compact sedan launched by Chevrolet, with body dimensions of 4450mm in length, 1807mm in width, and 1459mm in height, and a wheelbase of 2700mm. The Cruze is equipped with 1.6-liter and 1.8-liter Ecotec DVVT engines, with the 1.6L engine delivering a maximum power of 86 kW and a maximum torque of 150 Nm. The new Cruze will offer six body colors: Aurora White, Obsidian Black, Cold Platinum Silver, Glacier Blue, Titanium Gray, and Flame Red, as well as four interior color schemes: Starry Deep Gray, Brocade Deep Gray, Matte Gray Black, and Saddle Brown.
11
1
Share

Is the Geely Icon a New Energy Vehicle?

Geely Icon is not a new energy vehicle; it is a hybrid electric vehicle. Hybrid Electric Vehicle: A hybrid electric vehicle refers to a vehicle whose propulsion system consists of two or more individual drive systems that can operate simultaneously. The vehicle's driving power is provided by either a single drive system or multiple drive systems working together, depending on the actual driving conditions. Hybrid electric vehicles are classified as energy-saving vehicles and are not considered new energy vehicles. New Energy Vehicle: A new energy vehicle refers to a vehicle that utilizes unconventional automotive fuels as its power source or combines conventional automotive fuels with new types of on-board power devices. Based on the vehicle's power control and advanced driving methods, these vehicles are produced with new technologies and structures. New energy vehicles consist of three main components: the power supply system, the electric drive system, and the auxiliary system.
15
5
Share

What does a triangle with an exclamation mark mean in a car?

A triangle with an exclamation mark in a car indicates a general fault in the vehicle. Common faults include: overheating of the dry dual-clutch transmission, intervention or failure of the fuel cutoff system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, and traction control system warning or failure. Solutions for when the general fault light comes on are: 1. Check if the engine oil pressure sensor is malfunctioning; 2. Check if the traction control system is malfunctioning; 3. Check if the fuel cutoff system is malfunctioning; 4. Check if the dry dual-clutch transmission is overheating. An exclamation mark in the car indicates that the vehicle has developed a fault or abnormality, which could affect driving safety and damage the vehicle, necessitating inspection and repair.
15
0
Share

Why can't the Howo V460 accelerate when idling at 1000 rpm?

The issue of the Howo V460 being unable to accelerate when idling at 1000 rpm is related to fuel system and electrical system problems. Below are the specific explanations for the causes: Fuel system reasons: A lean air-fuel mixture causes insufficient thrust on the piston after ignition, prolongs combustion time, and leads to engine overheating and other faults. The judgment for a lean mixture is poor acceleration during operation, which improves when manually adjusting the choke or pumping fuel, but returns to poor acceleration when the mixture is not enriched. Electrical system reasons: High-voltage interruption: Faults in high and low voltage components and wiring of the ignition system can cause intermittent high-voltage sparking, resulting in intermittent engine operation and poor acceleration; weak or red high-voltage spark: Faults in ignition circuit components and wiring can cause excessively weak high voltage, leading to poor engine performance and suboptimal high-voltage sparking.
20
2
Share

What could be the reason for suddenly losing clutch during prolonged high-speed driving?

The clutch cable may have snapped, or the clutch disc could be broken. Here is more relevant information: Clutch Location: The clutch is situated within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting power from the engine to the transmission. Clutch Function: The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time. Its basic requirements include smooth engagement, quick and thorough disengagement, ease of adjustment and repair, compact size, lightweight, good wear resistance, sufficient heat dissipation capacity, and effortless operation. Commonly used types include jaw clutches and friction clutches.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.