Why can't the key turn after inserting it into the Accord?

1 Answers
DelCecilia
07/29/25 10:20pm
The reason why the key can't turn after inserting it into the Accord is that the steering wheel is locked. The solution is to gently turn the steering wheel left and right with your left hand while turning the key with your right hand simultaneously. Taking the Accord 2021 model as an example, it is a mid-size car with a body size of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, and a fuel tank capacity of 56 liters. The Accord 2021 model is equipped with a 1.5T turbocharged engine, with a maximum power of 143kW and a maximum torque of 260Nm. It uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
19
5
Share
More Forum Discussions

Why does the new Sagitar shake during cold start?

Sagitar shaking during cold start may be caused by excessive carbon deposits in the engine. Here are detailed explanations about Sagitar's shaking issue: 1. Cause of shaking: Carbon deposits on valves and intake ports can lead to incorrect judgments by the ECU, resulting in insufficient fuel injection. Even with fully combusted air-fuel mixture, it cannot guarantee adequate power output, thus causing vehicle shaking. 2. Technical principle: During low temperatures, the temperatures of the engine, fuel, and lubricant are all insufficient. Therefore, more fuel should be injected during cold starts to meet power requirements. The larger the spark plug gap, the smaller the ignition energy. Poor fuel atomization at low temperatures requires higher ignition energy. With prolonged use, the spark plug gap tends to increase, leading to reduced ignition energy, which affects power output and causes vehicle shaking.
9
3
Share

Can a motorcycle still be inspected if it hasn't been inspected for a year?

If a motorcycle hasn't been inspected for a year, it can still continue to participate in the annual inspection. Motorcycle annual inspection: The first inspection is when the license is renewed after six years, and the second inspection is when the license is renewed after ten years. After the license is renewed after ten years, it becomes a long-term driver's license, which does not need to be renewed or inspected. Motor vehicle annual inspection form: The vehicle owner or unit needs to fill out the "Motor Vehicle Annual Inspection Form" and send it to the designated location for annual inspection on the date specified by the local vehicle management office. If the vehicle passes the inspection, the vehicle management authority will stamp the driving license and the "Motor Vehicle Annual Inspection Form" with (×× Year ×× Vehicle Management Office Inspection Passed) seal.
7
1
Share

How Many Points Are Deducted for Braking in Subject 2?

No points are deducted. In Subject 2, braking is required for the slope fixed-point parking and start, parallel parking, and reversing into a garage. Braking can also be used in other sections, and some students can pass the test by lightly applying the brake throughout Subject 2. However, it is important to avoid stopping midway, meaning the speed drops to zero. A pause of more than 2 seconds during the test will be judged as stopping midway, resulting in a 5-point deduction. If the engine stalls due to improper operation, a 10-point deduction will be applied. Below is additional information: Notes: Apart from using the brake pedal to control speed, the clutch can also be used to regulate speed. If students feel the speed is too fast to steer promptly or need a bit more reaction time, they can slightly depress the clutch to reduce power output, thereby achieving better speed control.
18
4
Share

What are the symptoms of a faulty turbocharger bypass valve?

Here are the symptoms of a faulty turbocharger bypass valve: 1. The boost pressure in the compressor exceeds the predetermined value: The air pressure pushes the diaphragm to compress the spring, causing the connecting rod to push outward and open the wastegate. This diverts part of the exhaust gas away from the turbine, allowing it to enter the exhaust pipe directly through the bypass valve installed before the turbine. This reduces the amount and pressure of exhaust gas driving the turbine, thereby lowering the turbine speed and boost pressure, preventing engine "over-boost" and potential runaway. 2. When the compressor pressure drops to a certain value: The pressure above the diaphragm is insufficient to overcome the spring force, causing the spring to rebound and move the connecting rod to close the bypass valve. All exhaust gas then drives the turbine again, increasing the boost pressure until the next time the bypass valve opens. This cycle continues, keeping the engine's boost pressure controlled at a fixed value.
9
1
Share

How to Deal with Hot Leather Seats in Summer?

Here are some methods to handle hot leather seats in summer: 1. Install ventilated seats: Inside the seat, a turbo fan is installed through reasonable circuit design, and when it operates, air blows out from the seat fabric. Seat ventilation can be divided into blowing and suction types, and this function facilitates air circulation, with the most noticeable effect when the air conditioning is turned on. 2. Use quick-acting cooling spray: Liquid nitrogen or carbon dioxide is stored in a can and sprayed on the seat surface to rapidly lower the seat's surface temperature. 3. Use cool car seat cushions: It is recommended to choose materials such as bamboo fiber, bamboo charcoal, linen, silk, or buffalo leather. There is a variety of products on the market, and prices vary widely depending on the material. 4. Avoid direct sunlight on the seats by applying sun film or using sunshades: While lowering the car's interior temperature, the seat temperature will also decrease accordingly. Opening the car doors for ventilation before driving can effectively reduce the temperature to an acceptable level.
12
0
Share

What is the reason why a motorcycle does not move when in gear?

It may be due to a damaged automatic centrifugal clutch. Below is relevant information: Motorcycle: A motorcycle is a two or three-wheeled vehicle driven by a gasoline engine, steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrol, passenger and cargo transportation, as well as a sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. Power knowledge: Horsepower was originally defined by the French and Germans. However, since the horses used to measure horsepower were smaller than average, an engine with 50 horsepower should not be imagined as being pulled by 50 horses, but rather by about 35 horses. The unit (ps) used to represent horsepower was first introduced by the Germans and is still in use today.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.