Why can't the ix25 start with one-button ignition?

1 Answers
OArcher
07/30/25 10:52am
ix25 one-button ignition failure is mainly caused by issues with the key, fuel filter, fuel, etc. Key: If the key battery is dead, replacing the key battery can solve the problem. On the other hand, if the key is not on your person or within the sensing area, simply carrying the key with you or placing it in the car will help. Additionally, radio interference can also cause this issue; in such cases, bringing the key closer to the one-button ignition signal reception area can resolve it. Fuel Filter: A clogged fuel filter or a blocked fuel pump screen can also prevent the car from starting with one-button ignition. Fuel: Insufficient fresh air or inadequate fuel supply can result in the car failing to start successfully with one-button ignition.
Was this review help?
7
3
Share
More Forum Discussions

Where are the car fog lights located?

Car fog lights are located below the car headlights. Fog lights can increase the running distance and improve the visibility of the driver and surrounding traffic participants, allowing oncoming vehicles and pedestrians to spot each other from a farther distance. Car fog lights are divided into: 1. Front fog lights; 2. Rear fog lights. In terms of materials, they are categorized into: 1. Gas car fog lights; 2. LED car fog lights. The function of car fog lights is to provide a high-intensity scattered light source designed to penetrate thick fog and alert oncoming drivers. The purpose of rear fog lights is to make the vehicle more visible to drivers behind in low-visibility conditions such as fog, snow, rain, or dust.
3
0
Share

What to Do When Windshield Wipers Blur in Rainy Weather?

The solutions for blurry windshield wipers on rainy days are: 1. Remove the wiper blades; 2. Tear water sandpaper into small pieces; 3. Use a suitable container to hold water, then soak the wiper blades and water sandpaper in it; 4. Sand the rubber strips of the wiper blades with water sandpaper for about 5 minutes. Windshield wipers are blade-like structures installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The maintenance methods for windshield wipers include: 1. Clean the water accumulated on the wipers and windshield promptly after washing the car; 2. Regularly check the wipers for cracks or damage; 3. Stand the wipers upright when parking outdoors for extended periods.
6
1
Share

How to Solve Foggy Car Windows?

Press the defogging button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and turn on the external circulation to remove fog. Both cold and warm air can defog car windows, but warm air works slower than cold air. The most effective method is to use cold air, which blows dry, cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving defogging. The method for warm air defogging is the same as cold air defogging, but note that warm air should not be used on rainy days as it may initially worsen the fog. Always use external circulation when defogging car windows. The reason for foggy car windows: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface with the lower temperature will have a lower saturated vapor pressure than the surrounding environment, causing water vapor to gather on the glass surface in the form of tiny droplets, forming fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car without turning on the air conditioning promptly, the exhaled air has high humidity, and the windshield will fog up quickly. At this time, turn on the air conditioning to blow cold air onto the windshield, using the dehumidifying function to remove the fog quickly. If the humidity is too high and the air conditioning is not effective enough, slightly open a window to quickly reduce the humidity inside the car. Combining this with the air conditioning will yield faster results. Air Conditioning Warm Air: Use the method of reducing the temperature difference to remove fog. In winter, blow warm air onto the glass to quickly raise the temperature of the windshield, reducing the temperature difference between the inside and outside surfaces of the glass, thereby preventing heavy fogging. However, note that the rear and side windows heat up more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Do not set the air conditioning temperature to the coldest position, as this may cause the outer surface of the windshield to fog up over time. Applying Anti-Fog Spray: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin, transparent protective film forms, effectively preventing water vapor from condensing into fog on the glass. This is especially useful in cold winters. Alternatives to anti-fog spray include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying and letting it dry, wipe off any excess with a chamois or soft dry cloth. This will keep the car windows fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, opening the windows on both sides can create airflow between the inside and outside of the car, reducing the temperature difference and gradually eliminating the fog. The principle of this method is the same as using cold air from the air conditioning. However, this method has obvious drawbacks and cannot be used during rain, snow, on highways, or when the fog is heavy. Rear Window Heating: Most cars have a rear window heating function, though the button location may vary. Turning on the rear window heating switch will remove the fog in about a minute.
19
5
Share

What are the precautions for high-speed driving?

High-speed driving precautions are: 1. Adjust the seat position and rearview mirror before driving, and fasten the seat belt; 2. Turn on the ignition key and wait for the computer self-check to complete before starting; 3. Ensure the handbrake is released before driving; 4. Keep the heel on the ground when stepping on the pedal, and slowly release the clutch and gently press the accelerator when starting; 5. Always use the turn signal and slow down when turning or changing lanes; 6. Keep your eyes level and look 100 meters ahead when driving on a clear road, not focusing on the immediate front of the car; 7. Turn on the hazard lights when parking on the roadside; 8. Apply the handbrake when parking; 9. Stay focused while driving; 10. Do not occupy two lanes for a long time.
5
5
Share

Can the Spare Tire Reach a Speed of 100 km/h?

The speed capability of a spare tire reaching 100 km/h depends on its type: 1. A full-size spare tire can reach speeds up to 100 km/h; 2. A non-full-size spare tire cannot reach speeds of 100 km/h. The locations of spare tires include: 1. Under the trunk mat; 2. Mounted on the rear of the vehicle; 3. Beneath the chassis. The steps for replacing a spare tire are: 1. Retrieve the spare tire, jack, and tire wrench from the trunk; 2. Place the jack under the chassis support and slowly lift the vehicle, placing a tire chock under the car for safety; 3. Use the wrench to remove the bolts of the tire that needs replacing and take off the tire; 4. Align the spare tire with the axle and bolt holes, then tighten the tire bolts securely.
4
1
Share

How Many Cylinders Does the Lynk & Co 03 Engine Have?

Lynk & Co 03's engine cylinder count varies depending on the engine type: 1. The 1.5L turbocharged engine has 3 cylinders; 2. The 2.0L turbocharged engine has 4 cylinders. Taking the 2021 Lynk & Co 03 Manual Pure Lite as an example, it is equipped with a 1.5L turbocharged engine, with a maximum power of 115kW, a maximum power speed of 5000 rpm, and a maximum torque speed ranging from 1450 to 4000 rpm. The 2021 Lynk & Co 03 Manual Pure Lite is a compact car with body dimensions of 4639mm in length, 1840mm in width, 1472mm in height, and a wheelbase of 2730mm.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.