Why can't the interior light of the Odyssey be turned off?

1 Answers
MackenzieRose
07/29/25 9:35am
If the interior light of the Odyssey cannot be turned off, you can check the switch position. If the switch is in the off position, it may be a switch or circuit malfunction. Here is some extended information about interior lights: 1. Concept: Interior ambient lights are decorative lighting, usually in red, blue, green, etc., mainly to make the car more dazzling at night, enhance the atmosphere, and create an indoor mood. 2. Function: Provide interior lighting. Reading lights provide sufficient brightness for passengers when the interior light is insufficient, without affecting the driver's normal driving. Some owners forget to turn off the interior reading lights after locking the car, which may lead to battery drain and difficulty starting the car.
Was this review help?
5
4
Share
More Forum Discussions

What are the reasons why a car with power cannot start?

Car with power cannot start due to wrong gear selection, no fuel, or fuel pump failure. The reasons and corresponding solutions are introduced as follows: Wrong gear selection: If the gear is in D or R position, the engine cannot be started. Only when the gear is in P or N position can the engine be started. The solution is to shift the gear correctly, paying attention not to select the wrong gear. No fuel: Apart from a dead battery, the engine cannot be started if the car runs out of fuel. Usually, this happens because the engine was not turned off when exiting the vehicle, leading to fuel depletion and battery drain, making it impossible to start the car. The solution is to refuel with the appropriate grade of gasoline. Fuel pump failure: If the starter operates normally during ignition but the car does not start, the fuel line should be checked. The solution is, if the fuel pump is damaged and the pump diaphragm is slightly torn, to apply soap on the torn area, separate the torn diaphragm from the intact one by staggering the tears, and then reinstall it. If the tear is long, a piece of film or oilcloth can be cut into the shape of the diaphragm and placed between the diaphragms to hold the tear together.
6
0
Share

Why Does the Wuling Hongguang Have High Water Temperature?

Wuling Hongguang's high water temperature is caused by air in the cooling system, debris in the radiator, abnormal coolant in the water tank, or sand holes/perforations in the cylinder block's water jacket. Below are detailed explanations of these causes: Air in the cooling system: This can create airlocks, disrupting coolant circulation and leading to excessive engine temperature. Debris in the radiator: If the vehicle is driven on dirt roads or muddy paths for extended periods, debris may accumulate on the radiator, eventually reducing cooling efficiency and causing high water temperature. Abnormal coolant in the water tank: If the temperature is too high or the temperature indicator light keeps flashing, stop to check whether the coolant level is normal and inspect for leaks around the water tank or hoses. If no abnormalities are found, top up the coolant and continue driving. Sand holes or perforations in the cylinder block's water jacket: If, after addressing the above issues, the temperature remains high after driving a certain distance and coolant continues to decrease upon inspection, this may indicate leaks due to sand holes or perforations in the cylinder block's water jacket, requiring immediate repair.
10
1
Share

What is the ground clearance of the Haval Big Dog?

The ground clearance of the Haval Big Dog is 200mm, with approach, departure, and ramp breakover angles of 24 degrees, 30 degrees, and 22 degrees respectively. Chassis Composition: The automotive chassis consists of four parts: the transmission system, the running gear, the steering system, and the braking system. Function of the Chassis: The chassis supports and installs the car engine and its components and assemblies, forming the overall shape of the car. It also receives the power from the engine to enable the car to move and ensure normal driving. Chassis Maintenance Guidelines: In winter, to maintain the chassis, it is necessary to thoroughly clean the chassis and apply anti-rust treatment. During the maintenance process, ensure an even spray coating to form a long-lasting, uniform anti-rust layer.
7
2
Share

How to Identify Genuine Automotive Engine Oil?

Methods to identify genuine automotive engine oil include: 1. Inspect the packaging – authentic oil has fine craftsmanship without burrs or protruding connections; 2. Examine the oil appearance – genuine oil is free of impurities, suspensions, or sediments, flows well when shaken, while counterfeit oil usually appears darker in color or contains sediment impurities. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Engine oil consists of base oil and additives, which determine the fundamental properties of the lubricant. Additives compensate for and enhance the performance shortcomings of the base oil.
14
4
Share

How to Adjust the Kingpin Inclination Angle?

Methods for adjusting the kingpin inclination angle: 1. For MacPherson suspension, adjust the hard points; 2. For double-wishbone suspension, adjust by adding shims to the upper control arm. When observed from one side of the vehicle, if the kingpin tilts backward, it is a positive inclination angle; if it tilts forward, it is a negative inclination angle. The kingpin inclination angle mainly affects handling in two ways: first, its impact on the camber angle, and second, steering feedback and straight-line stability. With a positive inclination angle, during steering, the inner half-shaft moves downward relative to the road surface, while the outer half-shaft moves upward. Therefore, the kingpin can be considered as the rotation center of the wheel hub.
19
0
Share

How Many Cylinders Does the BMW 5 Series Engine Have?

BMW 5 Series is equipped with a four-cylinder engine. Below is the extended content: Introduction to BMW 5 Series: The BMW 5 Series is powered by a 2.0T turbocharged engine, which has a maximum power output of 135kW and a maximum torque of 290Nm. It is paired with an 8-speed automatic transmission. The dimensions of the BMW 5 Series are 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. In terms of exterior design, the BMW 5 Series features the classic kidney grille at the front, with the grille connected to the headlights on both sides. The headlights, including both low and high beams, are equipped with full LED lighting. Inside, the BMW 5 Series is equipped with a 10.25-inch central control screen, a 12.3-inch digital instrument cluster, Apple CarPlay, ambient lighting, and aviation-style headrests. Introduction to Four-Cylinder Engines: Four-cylinder turbocharged engines perform better in terms of starting, acceleration, and speed compared to three-cylinder engines. They also offer greater stability, higher technological sophistication, and lower accident rates. Four-cylinder engines are typically used in sedans with a displacement of 1.3L or above. While they provide greater power, they also consume more fuel and incur higher maintenance costs.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.