Why can't the Haval H6 window be raised with one-touch?

1 Answers
RhettDella
07/29/25 5:20pm
Haval H6 window cannot be raised with one-touch may be due to incorrect settings, try resetting it. If it still doesn't work, the switch might be damaged and needs replacement. One-touch window function introduction: The one-touch window control has two gears. When you want to open the window partially, use the first gear. To fully open the window, press it all the way down, there will be a slight sound and feedback force, then the window will automatically lower. Generally, buttons with one-touch window function have anti-pinch protection. For cars frequently carrying children, it's best to have this function, and always lock all four windows from the driver's control side while driving. Definition of one-touch window: One-touch window refers to a car window system where the glass can be controlled to rise or fall to position with a single button press. With ordinary power windows, you need to hold the switch until the window reaches the desired position, then release the button to stop the movement.
Was this review help?
3
5
Share
More Forum Discussions

Why does the 4S shop mortgage the new car certificate to the bank?

There is an agreement between the company and the bank. Here are the relevant details: Introduction: There is an agreement between the company and the bank. After the vehicle is sold, the finance department will go to the bank to complete the procedures to retrieve the certificate. Under normal circumstances, it can be delivered to the customer in time. However, if the finance department cannot retrieve it, it may be due to the company's reasons. As long as the company resolves the issues with the bank, the certificate can still be retrieved. Relevant regulations: Article 10 of Chapter 2 of the "Regulations on the Responsibility for Repair, Replacement, and Return of Household Automobile Products" issued by the General Administration of Quality Supervision, Inspection and Quarantine stipulates: Household automobile products shall have a Chinese product certificate or relevant proof, as well as accompanying documents such as product instruction manuals, three-guarantee certificates, and maintenance manuals. It can be seen that the certificate should be available when the car leaves the factory.
3
1
Share

What Causes a Car Fan Not to Spin?

Reasons why a car fan does not spin: 1. The water temperature has not reached the required level: Most car radiator fans nowadays operate using electronic temperature control, so the fan will only start spinning normally when the water temperature inside the car reaches the required level. If the temperature is too low, the radiator fan will not spin. Therefore, if the car radiator fan is not spinning, the first thing to check is whether the water temperature has reached the required level. 2. Relay failure: If the water temperature meets the requirements but the car radiator fan still does not work, the issue might be with the fan relay. If the relay is faulty, the car's radiator fan will not operate. 3. Temperature control switch problem: If there are no issues with the above two aspects, then the temperature control switch should be checked. Sometimes, faults can occur here, which can also affect the operation of the car radiator fan, so it is important to inspect this as well.
10
2
Share

What is the function of a thermostat?

The function of a thermostat is to automatically regulate the amount of water entering the radiator based on changes in coolant temperature, while also altering the circulation range of the water. This achieves the adjustment of the cooling system's heat dissipation capacity, thereby ensuring the engine operates within an appropriate temperature range. A thermostat is a valve that controls the flow path of the coolant, serving as an automatic temperature-regulating device. It typically contains a temperature-sensitive component that opens or closes the flow of air, gas, or liquid through thermal expansion or contraction. The thermostat must maintain good technical condition; otherwise, it can severely affect the normal operation of the engine. For instance, if the main valve of the thermostat opens too late, it can cause the engine to overheat. Conversely, if the main valve opens too early, it prolongs the engine's warm-up time, resulting in the engine temperature being too low.
3
4
Share

What are the three main components of a mechanical steering system?

Automotive steering systems generally consist of three main components: the steering control mechanism, the steering gear, and the steering linkage. When the steering wheel is turned, the steering shaft and worm gear rotate, causing the steering arm to swing and push the drag link back and forth. Since the steering knuckle pivots around the steering axis, it turns one of the front wheels to achieve vehicle steering control. Below is relevant information about steering systems: 1. There are two types of steering systems: mechanical steering systems, where the steering power comes from the driver's physical effort; and power steering systems, where the steering power includes both the driver's effort and the engine's power, typically used in vehicles weighing over 50 tons. 2. The requirements for steering systems include: the ability to self-center, light and responsive operation, consistency between steering direction and vehicle movement, minimized kickback to the steering wheel, and no self-oscillation during driving.
15
1
Share

Where to Adjust for Insufficient Supercharger Pressure?

For insufficient supercharger pressure, you can adjust the screw on the supercharger. First, open the outer cover of the supercharger to reveal a small screw. At the end of this screw, there is a nut. Loosen the nut, shorten the screw, and then tighten the nut securely. Vehicle superchargers are mainly divided into two types: mechanical superchargers and exhaust turbochargers. Mechanical superchargers are commonly found in European cars. While driving the supercharger consumes some of the engine's output power, the effect on power enhancement is not significant, and fuel economy is not high. However, the smoothness is better than that of exhaust turbochargers. Exhaust turbochargers utilize exhaust energy to drive the turbocharger. Their characteristic is that there is no mechanical connection between the turbocharger and the engine, mainly an air path connection. For power improvement and fuel saving, the effect is more pronounced.
2
3
Share

What is the reason for the flashing anti-theft light and failure to start in the classic Focus?

This is due to the activation of the engine anti-theft function and loss of computer system data. Reprogramming the PCM for the engine computer can restore functionality. If the issue persists, it is necessary to check the circuit, and it is recommended to seek professional inspection at a 4S shop. The engine electronic anti-theft system includes a transponder embedded in each key. Relevant information about the Focus is as follows: 1. Body dimensions: length is 4534mm, width is 1823mm, height is 1483mm, and wheelbase is 2648mm. 2. Exterior design: The model is designed with a sporty style, featuring more streamlined body lines. The interior also fully embodies a fashionable and sporty style, with an 8-inch navigation touchscreen and button layout that enhances driver convenience. 3. Configuration system: The Focus adopts intelligent automotive technology, equipped with an automatic parking system and vertical parking assist system, providing drivers with a more comfortable and convenient driving experience.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.