Why can't the Geely Xingrui use 92 gasoline?

1 Answers
VonJaxon
07/30/25 3:27am
Geely Xingyue's commonly used oil is 95 gasoline. Mixing different types of gasoline can easily lead to ignition system or spark plug failures, affecting the vehicle's lifespan. Therefore, the Geely Xingrui cannot use 92 gasoline. Below are detailed introductions about the Geely Xingyue: 1. Overview: The Geely Xingrui is a new compact sedan under Geely Auto, the first sedan based on Geely's CMA super architecture. The Xingrui is equipped with a 12.3-inch full LCD instrument panel and a 12.3-inch high-definition central control screen, with a wheelbase of 2800mm. 2. Powertrain: It is powered by a Volvo Drive-E series 2.0TD direct-injection turbocharged engine. The maximum power is 190 horsepower, and the maximum torque is 300 Nm, paired with a 7DCT transmission.
Was this review help?
8
4
Share
More Forum Discussions

How to Break in an Engine After Overhaul?

Methods for breaking in an engine after overhaul: 1. Avoid high speeds. Overhauled engines have speed limits, so try to keep the speed below 80 km/h and avoid letting the engine exceed 3,000 RPM. 2. Avoid emergency braking. Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. Try to avoid emergency braking within the first 300 km after the overhaul. 3. Pay attention to oil maintenance. Use high-quality, high-cleanliness engine oil that meets or exceeds the manufacturer's specified grade. Avoid using oils with added anti-wear agents or various additives to prevent further damage to the engine.
11
2
Share

How to Operate an Automatic Transmission Car in Traffic Jams on Uphill Roads?

Operating method for automatic transmission cars in traffic jams on uphill roads: Before encountering traffic congestion, the car is usually driven in D gear, then immediately switch to S gear (sport mode) or manual mode, and press the minus sign in the plus/minus buttons to downshift. In most cases, low gear is required, and it is advisable to lock in low gear. Driving in low gear allows the driver to have sufficient time to handle unexpected situations. The driver also needs to maintain a safe distance from the car ahead to prevent collisions. Additionally, the driver should avoid becoming impatient or agitated, as this can easily lead to unnecessary traffic accidents.
13
0
Share

Introduction to the Three Driving Modes of Haval H6 and How to Use Them

The all-new Haval H6 is equipped with a driving mode selection function, offering three modes to choose from: NORMAL (Standard), ECO (Economy), and SPORT (Sport). Different driving modes primarily adjust the throttle response speed in coordination with the transmission's shift timing to achieve varying effects. The difference is particularly noticeable when gently pressing the accelerator and switching between driving modes. Additional Information: In Sport mode, the throttle becomes significantly more sensitive, providing feedback with even the slightest press, and the transmission delays shifting to enhance acceleration. If you switch to manual mode using the paddle shifters at this point, it essentially unlocks the vehicle's peak performance state.
15
4
Share

Are the Three Major Components of the Nissan Qashqai Imported?

The three major components of the Nissan Qashqai are not imported; they are assembled and produced domestically using imported parts. In terms of appearance, the design of this car is relatively moderate, with some changes implemented in the details, which also to some extent highlight the sporty temperament of this car, making it more in line with the aesthetic views of young consumers. The car has dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm. It is a 5-door, 5-seat SUV, equipped with a CVT continuously variable transmission (simulating 7 gears) and a 2.0L L4 engine.
15
4
Share

What's the reason for the car window not rolling up or down?

Reasons why the car window cannot roll up or down: 1. The window lift motor is damaged or the electrical control wiring has poor contact. In this case, it is recommended to directly go to a 4S shop or auto repair shop to replace the window lift motor; 2. Motor overheating protection. To protect the power supply circuit, most window lift motors are equipped with an overheating protection mechanism. If the components overheat due to some reason, the motor will enter an overheating protection state, causing the window to fail to roll up or down; 3. Excessive resistance in the glass guide channel. The door glass guide channel is a detail that is often overlooked. During use, dust can accumulate in the glass guide channel, increasing resistance, which over time may make it difficult for the glass to rise.
19
2
Share

What does it mean when a wrench icon appears on the car dashboard?

The reason for a wrench icon appearing on the car dashboard is: The wrench symbol on the dashboard does not indicate an abnormality or fault in the vehicle, but rather serves as a reminder that the maintenance interval has been reached, prompting the owner to perform timely maintenance. The maintenance cycle for each vehicle is preset after leaving the factory, and the wrench icon will appear when the scheduled maintenance time arrives. Regular maintenance is crucial for the vehicle. The maintenance reminder can be set based on mileage and time intervals, with routine items including engine oil mileage, oil filter mileage, air filter mileage, cabin air filter mileage, tire mileage, brake pad mileage, etc. Additionally, these mileage intervals can be configured as countdowns based on actual needs.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.