Why can't the gear of Haval H6 be engaged?

1 Answers
Lulu
07/29/25 12:51pm
It may be because the positioning part of the gear lever's positioning ball head has failed, allowing the gear lever to rotate freely around its own axis and making it impossible to accurately control the gear. Here are detailed introductions about the Haval H6: 1. Overview: The Haval H6 is the main model of the Haval brand. On August 25, 2011, the Haval H6, positioned as an urban intelligent SUV, was grandly launched at the Great Wall Motors Tianjin new factory, offering Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, divided into three versions: Urban, Elite, and Premium. 2. Dimensions: The car has a length, width, and height of 4653mm, 1886mm, and 1730mm respectively, with a wheelbase of 2738mm, equipped with a 7-speed dual-clutch transmission, and the body type is a 5-door 5-seat SUV.
Was this review help?
18
5
Share
More Forum Discussions

Should the Car Air Conditioning Be Set to Recirculate Mode When Cooling?

Car air conditioning should be set to recirculate mode when cooling. Below are the relevant explanations: Reasons: In some areas, PM2.5 pollution is severe on certain days, with PM2.5 levels above 50. Unless the air quality is good, it is recommended to use recirculate mode to avoid inhaling excessive PM2.5 particles. During summer when the air conditioning is on, it is advisable to use recirculate mode because using fresh air mode allows hot outdoor air to enter the car, forcing the air conditioning to work continuously in cooling mode with poor cooling efficiency. Car Air Conditioning: The car air conditioning system, abbreviated as car AC, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to optimal conditions. It provides a comfortable environment for passengers, reducing travel fatigue, and creates good working conditions for the driver, playing a crucial role in ensuring safe driving as a ventilation device.
13
4
Share

Does the Volkswagen Tacqua have independent suspension?

The Volkswagen Tacqua uses a torsion beam non-independent suspension for the rear and a MacPherson independent suspension for the front. The Volkswagen Tacqua is a compact SUV under the Volkswagen brand. It is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine, both from Volkswagen's EA211 series. The 1.5-liter naturally aspirated engine delivers 113 horsepower and a maximum torque of 145 Nm, paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm, mated to a 7-speed dual-clutch transmission.
8
1
Share

Can I arrive at 9 AM for an 8 AM scheduled Subject 1 test?

It is possible to arrive at 9 AM for an 8 AM scheduled Subject 1 test, but it is recommended to arrive early as the later you arrive, the later your test time will be due to the large number of test-takers. The total duration of the Subject 1 test is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. The test questions are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". Test procedure: Follow the instructions of the staff and collect your driving training file in order in the waiting area; Bring and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the test area; No loud talking is allowed in the test area; Regulation textbooks are not allowed in the test area (or should be placed in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test should sign under the guidance of the staff at the exit before leaving the test area; Candidates who fail the test can leave the test area immediately and wait for their driving school to notify them of the retake time.
5
4
Share

Classic Focus: Should I Use 92 or 95 Octane?

Classic Focus uses 92 octane. The only criterion for selecting gasoline grade is the compression ratio of the car's engine. Generally, the higher the compression ratio of the engine, the smaller the volume of the combustible mixture compressed, resulting in more power and lower fuel consumption. The commonly referred 92 and 95 octane numbers represent the gasoline grade, which is the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the grade, the stronger the anti-knock performance. The dimensions of the Focus are 4647mm in length, 1810mm in width, and 1468mm in height. The new Focus is equipped with 1.0T and 1.5T engines, with the 1.0T engine having a maximum power of 94kw and the 1.5T engine a maximum power of 135kw. In terms of the transmission system, the engine is matched with an 8-speed automatic transmission and offers three driving modes.
8
5
Share

Are Senior Mobility Scooters Legal for Road Use?

Senior mobility scooters are legal for road use. Below is relevant information: Senior Mobility Scooters: Also known as elderly electric vehicles, senior mobility scooters come in two types: 3-wheeled and 4-wheeled. Manufacturers do not simply apply the configuration of traditional two-wheeled electric bicycles to these scooters during design; instead, they equip them with dedicated motors and controllers specifically for mobility scooters. Safety Protection: Discharge Termination Voltage Protection refers to the power supply voltage. During the final discharge phase under load, when the power voltage approaches the "discharge termination voltage," the controller panel (or instrument display) will indicate low battery to alert the rider to plan their trip accordingly. Once the power voltage reaches the termination point, the voltage sampling resistor feeds the shunting information into the comparator, and the protection circuit issues a pre-programmed command to cut off the current, safeguarding electronic components and the power supply. Current Protection: Excessive current can damage or even burn out a series of components in the motor and circuit, which must be absolutely avoided. The control circuit must include overcurrent protection functionality, cutting off the current after a certain delay when overcurrent occurs.
11
3
Share

How to reset the tire pressure light on Honda XRV?

Steps to reset the tire pressure light on Honda XRV: 1. Locate the central display screen inside the vehicle and press the CAE button on the left; 2. This will take you to the vehicle settings menu, where you should select the tire settings option; 3. Once inside the tire settings, click on SET; 4. The tire pressure monitoring system will then begin the initialization process, and once the progress bar is complete, the tire pressure light will be reset to zero. The dimensions of the Honda XRV are 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.