Why can't the dash cam see the rear traffic condition?

1 Answers
MacHenry
07/29/25 11:15pm
The reasons why the rear camera of the dash cam does not display are as follows: 1. Loose plug: Since the dash cam plug is always inserted in the interface, when the vehicle is moving, the vibration and shaking of the body may cause the plug to loosen. You can unplug and replug the plug and observe whether the screen responds. If there is still no response after multiple attempts, the cause of the loose plug can be ruled out. 2. Wiring issue: Due to the uniqueness of the camera wiring, it is recommended that the owner not attempt to repair it themselves. It is best to go to a professional after-sales repair point for inspection and repair.
Was this review help?
20
5
Share
More Forum Discussions

How many points will be deducted for parking within 10 meters of an intersection?

Parking temporarily within 10 meters of an intersection will result in a deduction of 3 points. Here is a detailed introduction about it: Introduction 1: Temporary parking is not allowed in areas with no-parking signs, closed or semi-closed roads, within 50 meters of an intersection, or within 10 meters of a bus stop. Introduction 2: If you park temporarily within 30 meters of an intersection and are caught by electronic surveillance, you will be deducted 3 points. Introduction 3: Parking is prohibited in sections with no-parking signs or markings, on road sections with isolation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as on crosswalks and construction zones.
7
5
Share

What gear is forward in a car?

Forward in a car is the D gear. Here are the relevant introductions: Definition of the forward gear: The full English name of the D gear is drive, meaning to drive, so the D gear is the forward gear. Function of the forward gear: Generally, many vehicles have corresponding protective measures. When the vehicle is shifted into the D gear, it cannot be started. This is to prevent some drivers from causing the vehicle to suddenly lurch forward due to misoperation and accidental ignition, thereby causing safety accidents. When the vehicle is in the D gear, the vehicle's engine and transmission will adjust the gear according to the current vehicle speed, without the need for the owner to actively intervene.
10
3
Share

What is the fuel consumption of the Mondeo?

The comprehensive fuel consumption of the Mondeo is 7.3L/100km. There are currently 2 models of the Mondeo on sale: the Luxury and Fashion models, both with a comprehensive fuel consumption of 7.3L/100km. The above figures are based on the NEDC comprehensive fuel consumption test, which measures fuel consumption under standardized driving conditions. Real-world fuel consumption is higher, ranging from 9.63-12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon buildup in the engine is a major cause, often due to using inappropriate fuel. It is recommended to add a certain amount of fuel cleaner when refueling. If the effect is not noticeable, it indicates significant carbon deposits in the engine. In such cases, the vehicle should be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit in the car, the oxygen sensor monitors the air-fuel ratio in the engine. If it fails, it can disrupt the air-fuel ratio, leading to a sudden increase in fuel consumption. A faulty oxygen sensor will cause the exhaust pipe to emit darker-colored emissions during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced periodically. If left unchanged for too long, they become dirty and can send incorrect signals to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, older vehicles may experience various faults over time.
12
0
Share

How Long Does It Take to Pick Up the Car After Touch-Up Painting?

You can pick up the car two to three hours after touch-up painting. Below are specific details on car paint maintenance: Waxing: Waxing forms a protective wax layer on the car's surface, isolating the paint from the external environment to prevent oxidation and fading. New cars do not require waxing within the first three months of purchase, and excessive waxing afterward can damage the paint. It is recommended to wax no more than once every two months. When waxing, apply even pressure and maintain a consistent direction. Crystal Coating: Crystal coating creates a robust fiber network on the paint surface, filling microscopic pores invisible to the naked eye, achieving a mirror-like effect. It adds a thin diamond-hard shell to the paint, further enhancing its hardness and protecting it from damage beyond traditional coating methods.
9
1
Share

Why does the 1.5L Buick Excelle have high fuel consumption?

1.5L Buick Excelle high fuel consumption reasons are as follows: 1. Poor fuel system: Excessive carbon deposits causing fuel line blockage, leading to high fuel consumption. 2. Brake abnormality: Brake pads not retracting properly, keeping the vehicle in a constant braking state while driving. 3. Spark plug malfunction: Generally, spark plugs need replacement after 20,000-30,000 kilometers. If you notice high fuel consumption, check if the spark plugs have abnormal ignition. 4. Dirty air filter: Timely replacement of air filters during vehicle maintenance is necessary, otherwise it may cause poor air intake and increased fuel consumption.
2
2
Share

Which manufacturer produces Sailun tires?

Sailun tires are a professional passenger car radial tire brand under the YongSheng Rubber Group Co., Ltd. Here are specific details about the tires: Function of tires: Tires support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road surface, reduce and absorb vibrations and impact forces during driving, prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy-saving economy. Tire maintenance methods: Tire maintenance methods include regularly cleaning stones from tire treads, minimizing exposure to direct sunlight, frequently checking tire pressure, paying attention to suspension maintenance, periodically checking front wheel alignment, and being mindful of driving habits.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.