···
Log in / Register

Why can't the cigarette lighter in Kia K5 charge?

3 Answers
SanHailey
09/02/25 2:28am
The reason why the cigarette lighter in Kia K5 cannot charge is: the cigarette lighter is an external USB interface and cannot provide charging. Taking the 2020 Kia K5 K5 as an example, its body dimensions are: length 4980mm, width 1860mm, height 1445mm, wheelbase 2900mm, fuel tank capacity 60l, and body structure is a 4-door 5-seater sedan. The 2020 Kia K5 K5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 170ps, maximum power of 125kw, maximum torque of 253 Nm, and is matched with a 7-speed dual-clutch transmission.
Was this review help?
19
2
Share
AmirLee
09/14/25 4:52am
I've been driving my Kia K5 for over two years when suddenly last week the cigarette lighter stopped charging my phone, which was really frustrating. I tried several different chargers and devices, but none worked—either the light didn't come on when plugged in or it just wouldn't charge. After checking online, it seemed most likely that the fuse had blown, as the cigarette lighter circuit is prone to this issue. The Kia K5's fuse box is under a small cover near the driver's footwell. I located the 15A fuse for the cigarette lighter, pulled it out with small pliers, and sure enough, it was blackened and melted. I bought a new fuse for two bucks at the auto parts market, replaced it, and everything went back to normal immediately. I suspect it was caused by an overload from using a knockoff charger, so now I only use genuine ones to avoid similar problems. Also, if the socket's spring contacts become loose, they can cause poor connections, so be gentle when plugging and unplugging. Regularly checking the fuse box can save you a lot of trouble.
Was this review help?
3
4
Share
Expand All
VonAxel
10/28/25 5:33am
The most common reason for a cigarette lighter not charging is a blown fuse, especially in models like the Kia K5. I've encountered this issue several times. First, confirm that the charger itself isn't faulty. If other devices also don't work when plugged in, check the fuse box. In most car designs, the cigarette lighter fuse is located under a small cover on the left side of the driver's seat, and the 15A fuse is prone to blowing—simply replace it with a new one to test. If that doesn't solve the problem, the issue might be internal aging or deformation of the socket, or a broken circuit caused by loose or corroded wiring connections. If you're comfortable DIY-ing, use a multimeter to check the voltage—no reading indicates a circuit fault, and it's best to visit a repair shop promptly to prevent potential overheating or fire hazards. Additionally, avoid using high-power car chargers to prevent overload, as simple maintenance can extend the lifespan of your cigarette lighter.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What is the process for renewing an expired driver's license?

After logging into the Traffic Management 12123 platform, select 'Renew Expired Driver's License' through the business center. If there is no valid driver's license photo available online, continue the process after submitting the required driver's license photo. Proceed to the driver's information confirmation page to verify details including name, driver's license number, expiration date, etc. Obtain a mobile SMS verification code, click submit after verification, and complete the submission of the expired license renewal application to finalize the process.
8
0
Share

How to Replace the Battery in a Mini Key Fob?

At the top of the key fob, there is a silver button; press this button. On the back of the key fob, you will notice a small gap near the cover; use a flathead screwdriver to pry it open. Use the flathead screwdriver to disengage the clips and remove the cover of the coin cell battery. Take out the old battery and insert the new coin cell battery you purchased. Finally, put the battery cover back on, reinsert the mechanical key, and snap the outer cover of the key fob back into place.
8
2
Share

How to reset Ford maintenance reminder?

Turn the ignition key to position 2, hold down the trip reset button without releasing, insert the car key and rotate until the instrument lights come on, then release. The maintenance light will go off. Below is relevant maintenance information: 1. When checking tires, inspect both tire pressure and wear condition. 2. As all drivers know, tires should be checked before trips. Before traveling, we should check whether there are any large foreign objects, sticky mud or other dirt on the tires. Also remember to check the tire wear condition - if abnormal wear appears on the tires, it means the tires need replacement.
17
2
Share

How to Clean Car Wax?

Cleaning car wax can be done using the following methods: 1. Use a sponge soaked in wax remover to apply in circular motions over the entire vehicle. 2. Rinse with a high-pressure water gun. 3. After drying, if there are still residues, use a sponge soaked in wax remover to wipe the affected areas, then rinse with a water gun. Additional information about car wax includes: 1. Car wax is a traditional product for maintaining car paint. 2. Car wax mainly consists of natural or synthetic wax, which penetrates into the paint's crevices to smooth the surface and enhance gloss. Traditional car waxing primarily focuses on gloss enhancement and protection.
19
5
Share

Where to Add Antifreeze in Audi Q7?

Method for replacing antifreeze: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze. 2. Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap to allow tap water to continuously flow through the engine cooling system. During the flushing process, keep the engine idling and continue the operation until clear water flows out of the radiator. 3. Turn off the tap, wait until all the water in the cooling system is drained, then close the radiator drain valve. 4. Add antifreeze from the radiator filler port until the radiator is full. Unscrew the reservoir cap, add antifreeze up to the "Max" mark, being careful not to exceed it. 5. Replace and tighten the radiator cap and reservoir cap.
17
2
Share

Is it dangerous if fuel overflows during refueling?

Fuel overflow is indeed dangerous for the following reasons: 1. Spilled fuel causes waste and can easily ignite in hot weather, becoming even more hazardous when exposed to open flames. 2. Overflowing fuel may soak surrounding components, potentially causing damage. 3. Fuel is highly volatile, and the evaporation process generates gases. When the tank is filled to overflowing, there's insufficient space to contain these gases, especially during bumpy rides, leading to tank expansion. 4. If the tank's vent is blocked, negative pressure may develop, potentially causing fuel supply issues. In severe cases, fuel might enter the intake manifold and soak the spark plugs, preventing the vehicle from starting.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.