Why can't the Chery Ant start due to high-voltage system shutdown?

1 Answers
AthenaLynn
07/29/25 6:34pm
Chery Ant's inability to start due to high-voltage system shutdown is a system malfunction that requires feedback to the manufacturer and repair at a 4S shop. Below is relevant information about the Chery Tiggo 3: 1. Introduction: "A practical and stylish SUV model" is Chery's clear positioning for the Tiggo 3. Following forward development standards and processes, significant upgrades and improvements have been made in sensory quality, manufacturing craftsmanship, as well as power, comfort, and configuration. 2. Dimensions: Although the chassis is derived from a B-class car, the Tiggo does not pursue a large body size. The Tiggo has an overall length of 4285mm and a wheelbase of 2510mm, about 100mm shorter than the Outlander, CR-V, and Tucson. This design primarily aims to highlight the vehicle's "on-road" characteristics and highway driving performance. Because of this, the Tiggo's minimum turning diameter is only 11m, comparable to the level of the Chery Cowin.
Was this review help?
19
5
Share
More Forum Discussions

What to Do When the Transmission Oil Pan is Leaking?

When the transmission oil pan is leaking, the solution is to replace the transmission oil pan gasket to resolve the oil leakage issue. Below are the impacts caused by a leaking transmission oil pan: 1. A leaking transmission oil pan can create a pathway, making the leakage progressively worse. If there are multiple oil leaks in the transmission and the transmission case temperature is high, it is usually due to the vent plug on the transmission cover being blocked by dust and mud, impairing ventilation. 2. When the transmission oil pan leaks, the heat and oil vapor generated by the gears under heavy load and high-speed rotation cannot be dissipated in time, leading to higher pressure inside the case compared to the external atmospheric pressure and elevated oil temperature, which causes the lubricating oil to become overly thin. 3. A leaking transmission oil pan can result in insufficient lubricating oil for the gears, causing premature wear and damage to gears, bearings, and other components, shortening the transmission's service life, and also polluting the environment.
16
4
Share

Where is the license plate Lu P from?

Lu P is from Liaocheng City, Shandong Province. Here is more information about car license plate numbers: 1. Car license plate numbers are mostly a combination of Chinese characters, letters, and numbers. Generally, the Chinese character represents the province, the letter after the Chinese character represents the prefecture-level city, the letter 'D' after the dot represents pure electric models, and the letter 'F' represents non-pure electric models. 2. Car license plate numbers are divided into two types: ordinary license plates and new energy license plates. Depending on the color, they can also be categorized as ordinary family vehicles, government department vehicles, military vehicles, and foreign-related vehicles. 3. Car license plate numbers are the identification plates for vehicles, just like a person's ID card.
11
2
Share

What Causes the Handbrake Warning Light to Illuminate?

Here are the main reasons why the handbrake warning light may illuminate: 1. The handbrake is not fully released. You can pull the handbrake and reposition it properly. 2. Brake fluid leakage: Visit a repair shop or 4S dealership to inspect and fix the leakage point, then replenish the brake fluid. Both warning lights will then turn off and return to normal. 3. Worn brake pads: Thinning brake pads cause the brake fluid level in the reservoir to drop. When it reaches the sensor's activation point, the handbrake light illuminates. However, if the fluid level hovers just around the sensor's threshold, the handbrake light may flicker intermittently as the vehicle moves.
14
2
Share

What is violation code 1345 and how is it penalized?

1345 is a violation code, specifically referring to driving in violation of prohibited markings. The most common violations include driving over double yellow lines, crossing lines, or parking on roadsides marked with no-parking signs. According to the Road Traffic Safety Law, violations under code 1345 will result in penalty points and fines. The specific violations under code 1345 are as follows: 1. Parking for extended periods in areas where temporary or long-term parking is prohibited, typically marked with no-parking signs. 2. Crossing or driving over double yellow lines, or driving along them for an extended period. Note that both double and single yellow lines prohibit crossing. 3. Stopping within yellow grid no-parking zones, often occurring when traffic congestion leads to unintentional entry into the grid without a quick exit. 4. Crossing solid white lines while driving. 5. Driving over or stopping within guide line areas.
9
5
Share

In which year did the third-generation EA888 start being used?

The third-generation EA888 has been in use since 2011. Relevant details are as follows: 1. The EA888 engine delivers more power compared to its counterparts in the same class. The 2.0T inline-four-cylinder engine can produce a maximum horsepower of 220 HP and a peak torque of 350 Nm. As of 2021, models such as the domestically produced Passat, Magotan, and the imported Multivan still utilize the EA888 engine, paired with Volkswagen's seven-speed dual-clutch transmission, offering excellent performance. 2. The 1.8T version of the EA888 can generate 170 HP with a maximum torque of 320 Nm, while the 2.0T version can reach up to 220 HP and 350 Nm of maximum torque.
8
1
Share

Can an N1 forklift license operate an N2 forklift?

Forklifts fall under the scope of special equipment management, which includes vehicle maintenance and forklift operators. Drivers holding the N1 Special Equipment Operator License are permitted to operate forklifts. Below is relevant information: Forklift License: The N1 Special Equipment License refers to the forklift license, officially named the 'Special Equipment Operator License'. It is issued by local municipal quality supervision bureaus, with the operation type designated as forklift operator. To apply for the N1 Vehicle Maintenance Operator License, applicants must meet the following basic requirements: be at least 18 years old; males under 60 and females under 55; possess a junior high school diploma or higher (including junior high) with at least 3 months of relevant work experience; be in good health and meet any special physical requirements for the applied operation type.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.