Why Can't the Car Start After Being Parked for Half a Month?

1 Answers
SanElaina
07/30/25 9:13am
Car parked for half a month can't start because of a dead battery. Here are the detailed reasons and battery maintenance precautions: Dead battery: Using in-car electrical appliances for a long time after the vehicle is turned off, generator failure that prevents charging, and natural aging of the battery can all lead to severe battery depletion. A dead battery results in insufficient starting energy, making the starter unable to work. Solution: Check whether the battery voltage is normal, use jump-starting, or replace the battery. Battery maintenance precautions: Before turning off the vehicle, turn off all electrical devices. Avoid long-term parking of the vehicle. Start the vehicle every week to maintain good battery voltage.
Was this review help?
19
0
Share
More Forum Discussions

How to Park with Auto Hold?

Steps for parking with auto hold are as follows: brake and shift to N gear; pull the electronic handbrake; release the brake and shift to P gear; turn off the engine. Auto hold is an automatic braking function that simplifies operations, especially in heavy traffic conditions. Auto hold must rely on an intelligent braking system, such as the ESP braking control system. Once auto hold is activated, after the vehicle comes to a complete stop and the indicator light appears on the dashboard, you can release the brake pedal. The electronic handbrake and auto hold system are two separate systems; auto hold is not achieved through the electronic handbrake. When the vehicle needs to be parked for an extended period, the handbrake is often used for parking. However, the electronic handbrake reacts slowly and is more cumbersome to operate. For temporary parking, auto hold is often used, which achieves automatic braking, avoiding the need to use the handbrake or electronic handbrake, and eliminates the need for frequent gear shifting in automatic transmission vehicles.
15
1
Share

Can a temporary ID card be used for the subject three driving test?

Temporary ID cards can be used for the subject three driving test. Temporary ID cards have legal validity in proving a citizen's identity and are valid identification documents for driver's license procedures. Applicants can take the subject three test with a temporary ID card. In many places, household registration books or residence permits can also be used for the subject three test, but to be on the safe side, it is recommended that candidates bring both their temporary ID card and household registration book. Additional information: 1. According to Article 103 of the newly revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" implemented on April 1, 2016, the identity proof for residents is either a "Resident ID Card" or a "Temporary Resident ID Card." 2. For mainland residents living outside their registered permanent residence, the identity proof submitted in accordance with Articles 19, 21, 22, and 83 is either a "Resident ID Card" or a "Temporary Resident ID Card," along with a residence certificate issued by the public security authorities.
11
4
Share

How to Change Tires on a Vehicle with Built-in Tire Pressure Monitoring?

For vehicles with built-in tire pressure monitoring, the tire pressure monitoring system needs to be reset after changing tires. The reset operation steps are as follows: 1. With the car turned off but powered on, simultaneously press the unlock and lock buttons on the car key for 3 to 5 seconds until the vehicle beeps twice; 2. Unscrew the valve cap of the left front wheel and continuously deflate the tire for about 15 seconds. When you hear a short beep from the car, the tire is successfully set; 3. Follow the above sequence to reset the car tires in the order of left front wheel, right front wheel, right rear wheel, and left rear wheel; 4. When all four tires are set, the car will emit two short beeps, indicating that the car has completed the relearning process. There are three types of car tire pressure monitoring systems: direct tire pressure monitoring, indirect tire pressure monitoring, and composite TPMS. Direct tire pressure monitoring and composite TPMS require the installation of tire pressure monitoring sensors on the car tires or rims, and the sensors need to be replaced together when changing tires.
15
2
Share

Where is the Tire Pressure Monitoring Display on the Wildlander?

The tire pressure monitoring display on the Wildlander can be viewed on the dashboard. However, it only appears when the tire pressure is abnormal and remains hidden under normal conditions. What to do if the tire pressure is low: If there is no visible damage to the car's tires, you can simply inflate them to the normal pressure and then reset the tire pressure system. If upon inspection you find that a tire has been punctured, you should promptly drive to a car repair shop to have the tire patched before reinflating it. If the low tire pressure warning appears again some time after inflating, but there are no punctures, it might be due to air leakage caused by a deformed wheel rim. In this case, it is recommended to check the wheel rim and replace it if necessary. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the air pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.
9
5
Share

What is the fuel tank capacity of the Verano?

The 2022 Verano has a fuel tank capacity of 44L, equipped with a 1.5T turbocharged engine delivering a maximum power of 135kW, maximum horsepower of 184P, and a maximum power speed of 5500rpm. In the same vehicle class, the 2021 Bluebird has a fuel tank capacity of 50 liters, while the 2022 Octavia has a fuel tank capacity of 51 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is close to E, it indicates low fuel, while approaching F means the fuel level is sufficient.
15
0
Share

What does NIO BaaS mean?

NIO BaaS stands for Battery as a Service, also known as NIO Battery Rental Service. The underlying logic of "Battery as a Service" is chargeable, swappable, and upgradable. NIO is a global smart electric vehicle brand, established in November 2014. Its main products include the NIO EC6, NIO ES8, NIO ES6, NIO EP9, and NIO EVE. Chargeable: This means using a private dedicated charging pile at home and commercial charging piles outside. You can choose NIO's own supercharging stations or any of the mainstream charging service providers in China, such as Star Charge, TELD, Wanma, Xiaoju, XPeng, and Yunkuaichong. Swappable: NIO's battery swap service supports magazine-style battery swapping, which can be completed in just 3 minutes. Based on the battery swap model, NIO offers battery rental services. Upgradable: This means NIO owners can continuously increase their vehicle's range by paying for upgrades. For example, upgrading from a 70kWh battery pack to an 84kWh battery pack, and then further upgrading to a 100kWh battery pack.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.