Why Can't the BYD Song Gear Shift Engage?

1 Answers
Ulysses
07/29/25 9:32pm
Here are the detailed reasons why the BYD Song gear shift may not engage: 1. Loose Shift Fork: The screws fixing the shift fork may have loosened, causing incomplete gear engagement. Severe wear on the shift fork can prevent it from moving the gear, leading to difficult shifting. In this case, repair or replace the damaged shift fork and tighten the fixing screws. 2. Worn Positioning Groove: Irregular steps on the surface may sometimes jam during gear shifting, preventing the positioning pin from sliding out of the groove, resulting in difficulty or failure to engage gears. This should be repaired. 3. Deformed Shift Shaft: A deformed shift shaft can make it difficult for the sliding gear to move. Repair or replace the shift shaft in this situation. 4. Incomplete Clutch Disengagement: If the gears inside the transmission continue to rotate during shifting, it can make shifting difficult. Adjust the clutch in this case.
Was this review help?
11
3
Share
More Forum Discussions

What's the difference between Pirelli P7 and P7KS?

Pirelli's new P7KS is an upgraded version of the new P7, and the differences between the two are as follows: 1. In terms of appearance, the tread pattern of the P7KS is finer than that of the new P7. A finer tread pattern indicates better comfort and braking performance. 2. In terms of material, the P7KS uses a new high-tech compound material and variable pitch design, which significantly improves the tire's vibration filtering and noise reduction effects, thereby providing a more comfortable driving experience. 3. In terms of service life, the P7KS features evenly distributed tread pressure, leading to more uniform tread wear. This results in a longer tire lifespan while maintaining high levels of performance and safety.
10
0
Share

Is it necessary to add break-in oil for a new car?

New cars do not require break-in oil. Simply use the vehicle normally to allow for natural break-in. The break-in period for a vehicle is between 1,000 to 3,000 kilometers. Key considerations during the break-in period of a new car include: 1. Avoid aggressive acceleration and braking to prevent damage to the chassis and braking system from impact; 2. Warm up the engine before driving to bring it to the appropriate temperature for adequate lubrication; 3. Maintain engine speed at around 3,000 RPM to prevent overloading the engine; 4. Avoid overloading the vehicle, with the recommended load being 70% of the vehicle's maximum capacity; 5. Use high-quality fuel to ensure stable engine operation and prolong the engine's lifespan.
6
0
Share

What is the car model with two inverted V logos?

The logo with two inverted V shapes belongs to Citroën. Additional information: 1. The power system is equipped with a 1327cc four-cylinder engine, with a fuel consumption of only 7.5 liters per 100 kilometers. It features a three-speed transmission configuration and can reach a top speed of 65 km/h. 2. Based on the original Type A model, Citroën has introduced a commercial vehicle: a trailer-style small truck with a load capacity of 300 kg. 3. Citroën is the third largest automobile company in France, founded in 1915 by André Citroën. The headquarters of Citroën is located in Paris, France. Its main products are passenger cars and light trucks.
16
3
Share

What is the correct way to use car air conditioning in summer?

The correct way to use car air conditioning in summer is: 1. Sit in the car and open the windows for ventilation; 2. Start the engine and turn on the blower to expel contaminated and hot air from the AC system; 3. After 5 minutes of natural ventilation, press the AC button; 4. Close the windows after 1 minute of cooling. Methods for using and maintaining car air conditioning: 1. Avoid setting the temperature too low; 2. Adjust the vent direction properly; 3. Don't use it continuously for extended periods; 4. Occasionally use higher fan speeds; 5. Turn off AC during low-speed driving. The main components of a car AC system are: compressor, condenser, evaporator, receiver-drier, and expansion valve.
1
2
Share

Solution for P0342 Trouble Code?

p0342 trouble code solution: Replace the vehicle sensor. Additional information about vehicle sensors is as follows: 1. The automotive oxygen sensor is a critical feedback sensor in the electronically controlled fuel injection engine system. It is a key component for controlling vehicle exhaust emissions, reducing environmental pollution caused by automobiles, and improving the fuel combustion quality of the engine. There are two types of oxygen sensors: zirconia and titania. 2. The wheel speed sensor primarily collects the vehicle's rotational speed to detect signs of wheel slippage. 3. The coolant temperature sensor converts the cooling water temperature into an electrical signal, increasing fuel injection at low temperatures. Internally, it consists of a semiconductor thermistor, where resistance increases as temperature decreases and decreases as temperature rises. It is installed on the engine block or cylinder head water jacket, in direct contact with the coolant.
13
4
Share

How to Identify the Production Date of Car Lights?

Methods to identify the production date of car lights: There will be a stamp on the car lights, and the production date can be seen from the stamp. The way to read the stamp may vary by manufacturer, so you can consult the car light manufacturer for specific details. Here is some additional information about car lights: 1. Car lights refer to the lamps on a vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movements. 2. Car lights are typically divided into headlights, taillights, turn signals, etc. Headlights are located at the front of the car and primarily serve lighting and signaling functions, illuminating the road ahead. Taillights are located at the rear of the car and also serve lighting and signaling purposes. Rear lights consist of rear position lights, reverse lights, brake lights, rear fog lights, rear turn signals, and reflectors.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.