Why Can't the Brake Pedal Be Depressed in an Automatic Transmission Car?

Is It Normal for Both Fenders Near the Headlights to Get Hot?

During vehicle operation, the engine generates heat, causing the fenders and hood to become warm. If you feel excessive heat after driving, it is recommended to visit a repair shop to check whether the engine is overheating and if the cooling fan is functioning properly. Below is relevant information about fenders: 1. Introduction: A fender is an exterior body panel that covers the wheel, named for its resemblance to a bird's wing in older vehicle designs. Based on installation location, fenders are categorized into front and rear fenders. The front fender is installed near the front wheel and must accommodate the maximum space required for wheel rotation and bouncing. Therefore, designers use "wheel travel diagrams" based on selected tire models and sizes to verify whether the fender's dimensions are appropriate. 2. Function: The primary role of a fender is to prevent gravel, mud, and other debris kicked up by the wheels from splashing onto the underbody of the vehicle during driving. As a result, the materials used must be weather-resistant and have good formability. Some vehicles feature front fenders made of slightly elastic plastic materials.

2

Share

What brand of tires does the X-Trail use?

The Nissan X-Trail is equipped with Dunlop brand tires, with a load index of 100, speed rating H, and specifications of 225/60/R18. Additional information: Usage notes: 1. Enhance awareness of tire safety: Regularly inspect tires, especially before highway driving. Conduct thorough checks including tire pressure and examine the tire sidewalls for cracks and tread wear. Address any potential hazards promptly. 2. Regularly correct wheel balance: Excessive wheel imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, perform dynamic balance testing and adjustments. The single-side dynamic balance test value should be ≤40 grams. 3. Perform regular tire rotation: To ensure even wear across all tires on a vehicle, rotate tires every 5,000 km and perform a four-wheel alignment every 5,000-10,000 km to prevent abnormal excessive wear. Do not install tires of different models or with significant wear differences on the same axle.

4

Share

Can You Change Lanes on a Solid Line?

Solid lines are a type of lane divider used to separate traffic flows moving in the same direction. They are generally represented by white or yellow dashed/solid lines. In most cases, white solid lines are used to separate lanes moving in the same direction, and lane changes are not allowed. Below is additional information: 1. Crossing a solid line is illegal: Crossing a solid line is considered a violation of traffic markings and is easily captured by electronic surveillance, which may result in corresponding penalties. Dangerous behaviors such as overtaking, making U-turns, or reversing over white solid lines, if captured by electronic surveillance or on-site by traffic police, generally lead to fines and demerit points. If a traffic accident occurs due to crossing a white solid line, the vehicle that crossed the line will bear primary responsibility for the accident. 2. Important notes: The most crucial thing is to clearly observe the roadside markings. Generally, crossing white lines will result in a ticket. If you are caught violating traffic rules by crossing a white solid line due to special circumstances (such as yielding to ambulances or fire trucks), you can apply for administrative reconsideration to have the ticket revoked.

10

3

Share

Is a Vehicle Blowout Considered a Traffic Accident?

A vehicle blowout is not considered a traffic accident. Here are some tire maintenance tips: 1. Check for cracks on the tread: Regularly inspect the tire surface for cracks, deformations, or other defects. The tread grooves gradually wear down over time, and if they become too shallow, they lose their ability to drain water and provide traction, significantly reducing the vehicle's performance. Even small cracks can pose a risk of blowouts at high speeds. Additionally, make sure to remove small stones lodged in the grooves. 2. Park on level ground: Avoid parking on surfaces with large, sharp, or jagged stones. Do not park near or in contact with petroleum products, acidic substances, or other materials that can deteriorate rubber. Drivers should also avoid turning the steering wheel after parking, as this accelerates tire wear. 3. Avoid cooling with water: Tires can overheat during prolonged or high-speed driving in summer, leading to increased air pressure. In such cases, park to allow the tires to cool naturally. Do not release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber.

1

4

Share

Why Does the Car Move When Releasing the Clutch?

Why Does the Car Move When Releasing the Clutch? The principle is: the engine crankshaft drives the flywheel to rotate, and the flywheel drives the friction plate. The other end of the friction plate is connected to the transmission. The clutch is the mechanism that separates the friction plate from the flywheel. When the driver releases the clutch, the pressure plate presses against the friction plate, causing the flywheel to drive the friction plate, which in turn makes the car move. Here are some additional details: 1. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Clutch Requirements: The clutch is a common component in mechanical transmission systems, allowing the transmission system to be engaged or disengaged at any time. Its basic requirements include: smooth engagement, quick and thorough disengagement; easy adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity; easy and effortless operation. Commonly used types are jaw clutches and friction clutches.

4

5

Share

What does it mean when BYD's self-matching succeeds and takes effect after restarting?

If antivirus software and programs like 360 are installed simultaneously, system compatibility issues may arise. In such cases, the system will prompt that the matching is successful and will take effect after restarting. You can uninstall and retain only one antivirus protection software. Additional information: BYD is a Chinese automotive brand established in 1995, primarily manufacturing commercial vehicles, family cars, and batteries. Starting with a team of just over 20 people, BYD grew to become the world's second-largest rechargeable battery manufacturer by 2003. In the same year, BYD Auto was established. Following a development strategy of independent R&D, production, and branding, BYD Auto is committed to creating truly affordable vehicles for the mass market. The product designs incorporate advanced international trends while aligning with Chinese cultural aesthetics. On November 8, 2017, BYD was listed among the Top 30 Business Cases with Era Influence in China. In December 2019, BYD was selected as one of the Top 100 Exemplary Brands at the China Brand Power Ceremony. On December 18, 2019, People's Daily released the China Brand Development Index Top 100, ranking BYD at the 24th position.

11

5

Share

Why Can't the Brake Pedal Be Depressed in an Automatic Transmission Car?

Is It Normal for Both Fenders Near the Headlights to Get Hot?

What brand of tires does the X-Trail use?

Can You Change Lanes on a Solid Line?

Is a Vehicle Blowout Considered a Traffic Accident?

Why Does the Car Move When Releasing the Clutch?

What does it mean when BYD's self-matching succeeds and takes effect after restarting?

What Causes the Strange Noise from Car Air Conditioning Vents?

Is the Sihao qx a new energy vehicle?

What is the plastic under the front bumper called?

What does 'dealership handles license plate registration' mean?