Why Can't the Brake Be Pressed When Using One-Button Start?

1 Answers
SanRowan
07/30/25 10:22am
One-button start brake cannot be pressed because the driver did not follow the correct steps to start the car. For cars equipped with one-button start, the correct operation is to first press the one-button start once, then press the brake, and simultaneously press the one-button start key again to complete the car's startup. When starting a car with one-button start function, it is necessary to press the one-button start button once before pressing the brake. The purpose is to allow the car to perform a quality check before starting. After the self-check is completed, you can press the one-button start button again and simultaneously press the brake pedal. At this time, the situation where the brake pedal cannot be pressed will not occur.
Was this review help?
13
4
Share
More Forum Discussions

What Does the Triangle Exclamation Mark Warning Light Indicate?

The triangle exclamation mark is a general fault indicator light in vehicles. Common vehicle faults that trigger this light include: overheating of the dry dual-clutch transmission, intervention or malfunction of the fuel cutoff system, parking sensor failure, exterior bulb failure, engine oil pressure sensor malfunction, traction control system warning or failure, among others. The appearance of any one of these faults will cause the triangle exclamation mark light on the dashboard to illuminate. In addition to the triangle exclamation mark indicator, other dashboard lights featuring an exclamation mark include the tire pressure indicator, lighting system fault indicator, steering system fault indicator, brake system warning light, transmission fault indicator, and windshield wiper fault indicator. Whenever any warning light with an exclamation mark illuminates, it signifies an issue with the corresponding component in the vehicle, necessitating prompt inspection and repair.
8
2
Share

What does sync mean in a car?

In a car, sync refers to the synchronization button of a dual-zone automatic air conditioning system. When the button light is on, the temperature of the air vents on both sides of the car is the same and adjusted synchronously. When adjusting the temperature on one side, both air vents will actually have the same temperature. When the air conditioning is turned on, simply setting different temperatures on both sides will automatically turn off the sync function. A dual-zone automatic air conditioning system features two separate temperature zones, allowing independent temperature adjustments for the left and right sides of the front cabin. Vehicles equipped with dual-zone automatic air conditioning can meet the different temperature requirements of passengers in two separate positions within the car, enabling flexible adjustment between different temperature differences in independent zones.
16
1
Share

What does AC mean on the air conditioner?

AC on the air conditioner is the abbreviation of Air Conditioning, which is the cooling switch of the air conditioner and also the power switch of the air conditioner compressor. When the AC button is pressed, the compressor of the car air conditioner will start working, and the air blown out by the blower will become cold. After pressing the AC switch, the electromagnetic clutch of the air conditioner compressor will engage, causing the compressor to operate, and the car air conditioner will enter the cooling mode. The knob outside the AC labeled MAX means large, while MIN means small. If the car is equipped with an automatic air conditioner, simply press the AC button and then the AUTO button, and the automatic air conditioner will adjust the interior temperature based on the temperature difference between the inside and outside of the car. If you need warm air in winter, be careful not to press the AC button, as it not only consumes more fuel but also blows cold air. This is because the car's heating process does not require the compressor to be turned on; the heat for the car's warm air comes from the engine's cooling water.
12
1
Share

What is the tire model of the Wuling Hongguang S?

The tire model of the Wuling Hongguang S is 175/70R14. The tire size specifications are written on the side of the tire. 175 represents the tire width of 175 millimeters, 70 represents the aspect ratio of 70, R stands for radial tire, and 14 indicates it can be mounted on a 14-inch rim. The Wuling Hongguang S is a microvan with dimensions of 4390 mm in length, 1660 mm in width, and 1750 mm in height, with a wheelbase of 2720 mm. The Wuling Hongguang S is equipped with two engines: a 1.2-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. The 1.2-liter engine delivers a maximum power of 56 kW and a maximum torque of 110 Nm, while the 1.5-liter engine produces a maximum power of 73 kW and a maximum torque of 140 Nm.
12
2
Share

How to Check the Fuel Level on a Motorcycle?

Methods to check the fuel level on a motorcycle: Observe the motorcycle's fuel gauge. 'F' indicates a full tank, while the red zone marked 'E' signifies low fuel. However, when the fuel gauge needle points to the red zone near 'E', the tank still contains approximately one-third to one-quarter of its total capacity, meaning there is still a considerable amount of fuel left—enough to travel several dozen kilometers. At this point, you should refuel promptly. For cross-type motorcycles, you can also rely on the fuel tank switch. After filling the tank, turn the switch to the main tank position. When the main tank runs out of fuel, switch to the reserve tank. At this stage, there are roughly two liters of gasoline left, sufficient for several dozen kilometers. Then, refuel and switch back to the main tank after filling up.
13
0
Share

Where to Set Up Keyless Entry?

Keyless entry does not require manual setup. It utilizes RFID technology, automatically locking and unlocking the doors through the chip in the smart card carried by the owner. This means when the owner approaches the vehicle within a certain distance, the door locks will automatically open and disable the anti-theft system. Conversely, when the owner moves away from the vehicle, the door locks will automatically engage and activate the anti-theft system. Vehicles equipped with keyless entry systems typically have a sensor button on the door handle, along with a keyhole as a backup in case the smart card is damaged or out of battery, allowing the owner to open the door conventionally. Once inside the vehicle, the onboard detection system immediately recognizes the smart card. After confirmation, the vehicle's computer system becomes operational, and the owner can start the vehicle by simply pressing the ignition button.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.