Why can't the Baojun e100 shift gears?

1 Answers
MacIsabela
07/25/25 2:35pm
Baojun e100 can't shift gears for the following reasons: 1. Cold weather: Difficulty in shifting gears due to cold weather is a normal phenomenon. After starting the cold car and driving for a while, the temperature of the gearbox rises, making shifting easier. 2. Gear damage: The positioning part of the gear lever's positioning ball head loses its function, allowing the gear lever to rotate freely around its own axis, making it impossible to accurately control the gear. 3. Spherical working surface wear: The spherical working surface at the lower end of the gear lever wears out, preventing the gear lever from controlling the shifting fork or the shifting head's shifting groove, making both shifting and disengaging impossible.
Was this review help?
10
5
Share
More Forum Discussions

Is there a speed requirement for Subject 3?

There is no specific speed requirement for turning during Subject 3. Generally, you should turn in second gear, meaning the speed should not exceed 30 km/h. If you stop at a traffic light before turning, you should start turning in first gear and then shift to second gear during the turn. Key challenges in Subject 3 exam: 1. Speed and gear mismatch: Be cautious about the mistakes of high gear at low speed or low gear at high speed during the test. Before shifting gears, ensure the speed is adjusted to match the gear, then switch gears. During driving, glance at the speedometer every eight seconds to avoid such errors. 2. Deviation in straight-line driving: Many learners intentionally slow down due to concerns about not driving in a straight line, which is not advisable. This can actually increase the likelihood of the vehicle deviating from its path, so it's better to maintain a reasonable and steady speed.
13
4
Share

Can a Clogged Cabin Air Filter Cause Air Conditioning Not to Cool?

A clogged cabin air filter can indeed cause the air conditioning to not cool properly. When the cabin air filter is blocked, it severely affects the airflow volume of the AC system. This results in situations where the fan speed is set high with significant noise, but the actual airflow is minimal. Consequently, the amount of cold air blown out is greatly reduced, impairing the cooling performance. Reasons for air conditioning not cooling or poor cooling effect: 1. Clogged cabin air filter causing restricted airflow - when the filter is blocked, the entire AC system's air intake is hindered, reducing the amount of air blown into the cabin, leading to poor cooling perception; 2. Dirty condenser surface in the AC system, resulting in reduced condensation efficiency; 3. Refrigerant leakage causing the AC to not cool or have poor cooling performance.
10
3
Share

What brand is the Weltmeister EX5?

Weltmeister EX5 is a vehicle under the Weltmeister brand. The EX5 is Weltmeister's first mass-produced car globally and is a pure electric intelligent SUV model. In the EX5, 'E' stands for pure electric, 'X' represents the SUV model, and '5' indicates the relative position of this vehicle in the future product lineup. The dimensions of the Weltmeister EX5 are 4585mm in length, 1835mm in width, and 1672mm in height, with a wheelbase of 2703mm. The EX5 features front-wheel drive, with a front suspension system consisting of MacPherson strut independent suspension with a stabilizer bar, and a rear suspension system of variable cross-section torsion beam suspension. The front fascia of the EX5 adopts a closed grille design commonly used in electric vehicles, with the Weltmeister logo on the charging cover that can display battery information, giving it a certain technological feel.
8
5
Share

What are the reasons for a Toyota Corolla suddenly failing to start?

The reasons for the car not starting are as follows: 1. Low battery voltage: You can turn on the headlights and some electrical devices to check if there are any noticeable changes in the brightness of the dashboard and interior lights during the starting process. If they dim, it indicates insufficient battery voltage. 2. Excessive carbon buildup in the intake manifold: Too much carbon buildup on components like the throttle body and idle control valve can prevent the engine from achieving the required air-fuel ratio, leading to the vehicle's inability to start. The repeated engagement of the solenoid and starter relay may produce a clicking sound. 3. Insufficient fuel supply in the fuel system: This issue is similar to excessive carbon buildup in the intake manifold, as it also prevents the engine from achieving the necessary air-fuel ratio, resulting in the vehicle's failure to start.
20
4
Share

What are the differences between the Xingyue and Xingyue S?

The difference lies in the fact that the Xingyue S features some green decorative accents that echo its exterior, creating a strong sense of unity. Specific details are as follows: 1. Exterior: From the exterior alone, the Xingyue S appears more sporty than the Xingyue, with sharper lines and edges that give it a more youthful visual effect. Additionally, the Xingyue S incorporates fluorescent green decorative strips in the details, resembling a claw-like design, which looks very novel. 2. Interior: Over 78% of the Xingyue S's body and chassis structural components are made of high-strength steel, and it also features a lightweight body. The interior styles of the two cars are almost identical, with the difference being that the Xingyue S has some green decorative accents that echo the exterior, creating a strong sense of unity.
9
0
Share

Should You Engage the Handbrake or Turn Off the Engine First After the Subject 2 Driving Test?

When you have driven to an appropriate distance by the roadside, press the clutch and brake, then shift the gear to neutral, engage the handbrake, and only release the clutch and brake before turning off the engine. Here are the relevant details: 1. Reason: If the handbrake is engaged, the car is effectively locked in place, preventing any forward or backward movement. If the handbrake is not engaged, releasing the foot brake may still allow the car to move slightly forward. Even if the car stops, if there is another vehicle in front, a minor collision could occur. Therefore, it is essential to engage the handbrake before turning off the engine. 2. Driving Test: The test primarily involves practical operations. Apart from the initial and final theoretical exams, it includes two intermediate tests, commonly referred to as the 'small road test' and the 'big road test.' While both tests may seem to take place on regular roads, the Subject 2 test is actually conducted within a test site, whereas the Subject 3 test involves driving on actual roads.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.