Why Can't the Automatic Transmission Shift from 5th to 6th Gear?

1 Answers
DelBentley
07/25/25 9:25pm
Automatic transmission fails to shift from 5th to 6th gear due to internal dirt and impurities. Specific causes and solutions are as follows: Specific causes: In many cases, it is not due to internal valve body damage but rather the presence of stubborn dirt and impurities inside. Particularly when dirt and impurities accumulate inside the valve body, forming blockages, it prevents effective regulation of oil pressure, leading to jerking, impact, and slippage issues, making gear shifting difficult. Solutions: To completely resolve the gear shifting issue and prevent its recurrence, it is necessary to remove stubborn dirt and impurities from the transmission and effectively control the transmission's operating temperature.
Was this review help?
3
0
Share
More Forum Discussions

How many hours of rest do car tires need in summer due to heat?

Car tires need 3 hours of rest in summer due to heat. Here is some relevant information about tires: 1. Introduction to tires: Tires are the only components of a car that come into contact with the ground. Some car owners only replace the tires on the drive wheels when changing tires. For example, some front-wheel-drive car owners only replace the two front tires, while some rear-wheel-drive car owners only replace the two rear tires. In fact, this practice is acceptable. 2. Tire aging: Tires are made of rubber and will age over time. It is recommended that car owners replace their tires every four years, even if the mileage is low during those four years. Tires can also age if left unused for long periods, so it's important to check the production date when purchasing new tires.
9
5
Share

What Causes a Mercedes Engine to Suddenly Shake with the Check Engine Light On?

Reasons for Mercedes engine shaking: 1. Ignition system issues: A malfunction in the car's ignition system can cause the engine to shake at idle. Typically, checking the spark plugs and replacing any faulty ones can resolve the issue. 2. Poor fuel quality: This is one of the most common problems in daily driving. Low-quality fuel can affect engine performance, leading to shaking at idle. Always refuel at reputable gas stations to ensure fuel quality. 3. Engine carbon buildup: Severe carbon deposits in the engine can cause shaking and reduced power. Timely cleaning of carbon deposits can address these issues. 4. Unstable oil pressure: Fluctuating oil pressure can disrupt fuel supply, resulting in engine shaking. In such cases, promptly check and ensure the oil pressure is within the normal operating range.
10
4
Share

What is the compression ratio of the Avalon engine?

The compression ratio of the Avalon engine varies depending on the model. Here are the specific details: 1. The pure gasoline version of the Avalon has a 2.0-liter naturally aspirated engine with a compression ratio of 12, and a 2.5-liter naturally aspirated engine with a compression ratio of 13. 2. The hybrid version of the Avalon has a 2.5-liter naturally aspirated engine with a compression ratio of 14. Below is a brief introduction to the Avalon's powertrain: 1. The pure gasoline version of the Avalon uses two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. 2. The hybrid version of the Avalon only uses a 2.5-liter naturally aspirated engine.
11
5
Share

How to Remove the Rearview Mirror of an Audi A3?

The method to remove the rearview mirror of an Audi A3 is: remove the door trim, remove the speaker, locate the screw at the bottom of the rearview mirror, and use a socket to remove it. The mirror can then be taken off. Additional information: 1. Taking the 2021 Audi A3 as an example, its body dimensions are: length 4351mm, width 1815mm, height 1458mm, wheelbase 2630mm, and fuel tank capacity 51l. 2. The 2021 Audi A3 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW, maximum power speed of 5000 to 6000rpm, and maximum torque of 250Nm. It is paired with a 7-speed dual-clutch transmission.
2
4
Share

How to Use Cruise Control in Buick Excelle?

To use cruise control in Buick Excelle, follow these steps: 1. Press the button at the upper right of the steering wheel combination keys to activate cruise control. Accelerate to the desired speed, then press the SET/- button to save and maintain the current speed. 2. When cruise control is active, hold down the RES/+ button or press it repeatedly to continuously or slightly increase the speed; alternatively, accelerate to the desired speed and press the SET/- button to save it. 3. When cruise control is active, hold down the SET/- button or press it repeatedly to continuously or slightly decrease the speed. 4. Press the middle button on the steering wheel combination keys to deactivate cruise control.
12
0
Share

What is the maximum speed limit on national highways?

National highways generally have speed limits ranging from 60 to 80 km/h. Here is some relevant information: 1. Provincial highways: In principle, their speed limits are similar to those of national highways, but they are highly irregular. Many have a limit of 60 km/h, and quite a few are limited to 40 km/h. A limit of 80 km/h is usually applied to very wide roads. It is rare to see national or provincial highways with speed limits exceeding 80 km/h. 2. Expressways: According to Article 78 of the latest revised "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" in October 2017, expressways must indicate the speed limits for each lane. The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.