Browse
For Sale
Antiques CollectiblesApparelBaby Kids ItemsBooks， Movies And MusicElectronicsFree StuffGarden OutdoorHealth BeautyHome GoodsHome Improvement SuppliesMusical InstrumentsOffice SuppliesPet SuppliesSporting GoodsTicketToys GamesTransportationOthers
Jobs
AccountingAdministration & Office SupportAdvertising， Arts & MediaBanking & Financial ServicesCall Center & Customer ServiceCEO & General ManagementCommunity Services & DevelopmentConstructionConsulting & StrategyDesign & ArchitectureEducation & TrainingEngineeringFarming， Animals & ConservationGovernment & DefenseHealthcare & MedicalHospitality & TourismHuman Resources & RecruitmentInformation & Communication TechnologyInsuranceLegalManufacturing， Transport & LogisticsMarketing & CommunicationsMining， Resources & EnergyReal Estate & PropertyRetail & Consumer ProductsSalesScience & TechnologySelf EmploymentSport & RecreationTrades & ServicesOther
Property
BuyRent
Cars
Used CarsNew CarsOthers
Services
BusinessCraftsDesign And WebEventsHome ImprovementLegalLessonsPersonalPetsPhotographyRepair And Technical SupportWellnessWriting， Translation， And TranscriptionOthers
Community
Activities & GroupsArtists & MusiciansClasses & LessonsEventsFriendship & NetworkingLost & FoundRideshareSports TeamsVolunteersTravel & Travel PartnersSkills & Language SwapOther

Why can't the Audi car's wireless network connection be used?

1 Answers
DeRemington
07/25/25 2:52pm
Reasons: The car's wifi has restrictions; the signal is unstable. The following is an introduction about Audi: 1. Introduction: A German luxury car brand, its logo is four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Development history: Audi cars use four rings as their logo. This is because in 1932, Audi merged with Horch, Wanderer, and DKW to form the 'Auto Union'. Each ring represents one company. The four rings are of the same size, interlocked side by side, symbolizing the equal status and close unity of the four companies, making the alliance unbreakable.
Was this review help?
5
3
Share
More Forum Discussions

The Difference Between Angel Eye Headlights and Demon Eye Headlights

Angel eyes and demon eyes are both luminous circular cathode tubes. The following is a detailed introduction to the differences between angel eyes and demon eyes: 1. The installation positions of angel eyes and demon eyes are different, which leads to different visual effects: Angel eyes are installed on the lens cover, while demon eyes are installed inside the lens. 2. Angel eyes are a light ring, originally used in BMW, serving as daytime running lights: In the modification market, angel eyes are divided into two main categories based on the light source: CCFL cathode tube angel eyes and LED light source angel eyes. 3. Demon eyes give a fierce and cool visual impression. The prerequisite for installing demon eyes is to install a lens: The headlights on a car are like the eyes of the car, and the lens is the eyeball. Inside the lens, a colored light is lit, causing the entire lens to change color, making the lens look like a demon's eyeball, hence the name demon eye. Demon eyes are also called wolf eyes or magic eyes, and demon eyes are also a light ring.
11
4
Share

What Situations Indicate That Engine Oil Needs to Be Replaced?

Engine oil needs to be replaced under the following circumstances: 1. The oil has deteriorated and has a strong, unusual odor: Pull out the dipstick, and if you can clearly detect an unusual smell with your nose, it indicates that the oil has deteriorated and needs to be replaced promptly. 2. Excessive impurities in the oil indicate that it has reached the end of its service life and needs replacement: Pull out the dipstick, place a few drops of oil on your thumb, and rub it back and forth between your thumb and index finger. Normal oil should feel clean, smooth, and free of particles. If the oil feels sticky or gritty, it means there are impurities present, and it needs to be replaced. 3. The oil has reached the specified maintenance mileage and needs replacement: Refer to the recommended maintenance mileage in the maintenance manual to determine when to change the oil. Additionally, under harsh driving conditions, regularly monitor the condition of the oil.
4
2
Share

What is the solution for the P0251 trouble code?

p0251 trouble code causes and solutions are as follows: 1. Open circuit in the fuel metering unit drive line. Unplug the fuel metering unit connector, turn the ignition switch to the ON position, and measure the voltage of both pins to ground. Normally, one should be 24V and the other around 3.3V. If there is no voltage, it indicates an open circuit. If both voltages are equal, it indicates a short circuit. Plug in the fuel metering unit, insert a pin from the back end, and measure the voltage of both pins to ground. Normally, both should be 24V. During startup testing, the drive line should be around 0.3V. Measure the resistance of the fuel metering unit; the normal value is 2.6-3.2 ohms. 2. Actual rail pressure is lower than the set rail pressure. Check for leaks or blockages in the low-pressure fuel line (tighten all pipe clamps, check for any folds, ensure the fuel tank is vented, and inspect for any blockages in the fuel tank's pickup tube). Check the fuel injector return flow; normally, the return flow should not exceed the metal plane above the injector's U-clip. Check the fuel injector's injection volume by removing and connecting the injector. If the injector drips during startup, the injector needle valve may be stuck in an open position. Note: For normal injector opening and injection conditions, rail pressure must be greater than 25M. Check if the fuel pump pressure relief valve is stuck in an open position; it can be disassembled and cleaned if necessary.
20
1
Share

Can I Change My ID Card During the Driving Test Period?

You can change it, and you can even take the driving test subject two with a temporary ID card. Here are the specific requirements for subject two: 1. Magnetic swipe of temporary ID card for subject two: Temporary ID cards cannot be swiped magnetically. If the test requires a magnetic swipe, you should inform the test center staff in advance. 2. Temporary ID card: The legal effect of a temporary ID card is equivalent to that of a formal resident ID card, so you can take the subject two test with a temporary ID card. It should be noted that the validity period of a temporary ID card is 3 months, and you cannot enter the test center with an expired temporary ID card, so you should apply for a formal or temporary ID card as soon as possible.
6
1
Share

Why does the car body shake when the air conditioner is turned on?

Car shaking when the air conditioner is on is generally caused by carbon buildup on spark plugs, carbon buildup on the throttle valve, or fan deformation or loose screws. Below is a detailed explanation of the reasons for car shaking when the air conditioner is on: 1. Carbon buildup on spark plugs: After a period of use, spark plugs will accumulate carbon deposits. If not cleaned in time, this can reduce the engine's torque output, leading to shaking when the air conditioner is turned on. Soak the spark plugs in a container with white vinegar for 2-3 hours, or 4-5 hours for severe cases. Then use a stiff brush to remove the carbon deposits. Clean them with gasoline and let them air dry naturally. 2. Carbon buildup on the throttle valve: When the air conditioner is turned on, the engine load suddenly increases, and the throttle valve opens wider. At this point, the issue of dirt is magnified, causing the throttle valve to stick or fail to open to the proper position, obstructing the air intake and reducing engine power, which eventually results in engine shaking. 3. Fan deformation or loose screws: Check if the shaking is caused by resonance when the fan operates after the air conditioner is turned on or if it's due to loose fan mounting screws causing vibration.
4
5
Share

What Causes the Steering Wheel to Be Slightly Off-Center?

Steering wheel being slightly off-center can be caused by the following reasons: 1. Tires: Insufficient tire pressure can cause the vehicle to pull to one side. 2. Tread: Uneven wear of the tread pattern can lead to pulling. 3. Suspension system: Issues with the suspension system design or damage to the suspension. 4. Performance: Deformation or poor performance of related components in the vehicle's suspension system. 5. Shock absorbers: Deformation of the shock absorbers or reduced elasticity of the shock absorber springs can cause changes in vehicle height. Another possibility is that deformation of the stabilizer bar and its small links can result in uneven vehicle height, with one side higher than the other.
8
2
Share
Trending Ranking
How to Evacuate and Vacuum a Car Air Conditioning System?
How to Remove Odor Inside a New Car?
What is a Segmented Sunroof?
4
What is the Difference Between Mild Hybrid and Hybrid Vehicles?
5
What Causes the Plastic Friction Sound When Turning the Steering Wheel?
6
What is the difference between the total mass and the curb weight on the vehicle license?
7
What Causes the Jerking Sensation When Braking?
8
What License Plate is Required for Motorhomes?
9
Where is the license plate Xi B from?
10
Where in Shandong is the license plate Lu A from?
More Forum Discussions

How to Open the Car Door with a Mechanical Key?

14
0
1

What Causes Smoke from the Radiator?

8
5
1

Reasons for P2015 Intake Manifold Runner Position Unbelievable Signal?

8
1
1

What year does the letter 'M' in the VIN represent?

13
5
1
About Us
Terms of Use
Privacy Policy
Help
Contact Us
FAQ
Cookie
Cookie Policy
Cookie Settings
© 2025 Servanan International Pte. Ltd.