Why Can't I Shift Gears When Starting the Car with the Clutch Pedal Pressed?

1 Answers
StHector
07/29/25 9:59pm
Here are the reasons and solutions for not being able to shift gears when starting the car with the clutch pedal pressed: 1. Clutch master cylinder failure—the clutch hydraulic master cylinder may experience pressure loss or oil leakage during use. Solution: Visit a repair shop to replace the clutch master cylinder, and perform an air bleeding operation after replacement. 2. Clutch cable failure. Solution: Replace the clutch cable directly. 3. Transmission failure. Solution: For transmission issues, professional repair at a specialized workshop is necessary. 4. Excessive gear self-locking force of the clutch. Solution: It is recommended to go to a repair shop to adjust the clutch cable and gear lock.
Was this review help?
14
3
Share
More Forum Discussions

What Causes Abnormal Brake Noises When the Car is Cold?

There are several reasons for abnormal brake noises when the car is cold, which require specific troubleshooting. The main causes include friction between the brake disc and pads, sand particles entering, and worn brake pads. Below is an introduction to the causes of abnormal brake noises when the car is cold: 1. Brake Disc and Pads: For new cars, new brake discs and pads need to be worn in, which can cause abnormal noises. These noises can be divided into vibration friction and sharp hissing sounds. However, these noises will disappear after a few hundred kilometers. If a new car experiences brake noises, no action is needed as long as the car does not pull to one side during braking. 2. Windy or Dusty Weather: Sand or dust particles may enter between the disc and pads, causing a hissing noise. In this case, stepping hard on the brakes a few times or waiting a few days will make the noise disappear. 3. Worn Brake Pads: When the brake pads wear down to the wear indicator, a hard point will produce a hissing sound. If the hissing noise occurs every time you brake for several days in a row, and the noise becomes louder and more frequent, it indicates that the brake pads are nearly worn out. At this point, the brake pads should be replaced.
5
4
Share

Are All Buick Excelle Models Equipped with Three-Cylinder Engines?

Whether all Buick Excelle models are equipped with three-cylinder engines is detailed as follows: 1. Not all Buick Excelle models have three-cylinder engines: Currently, both three-cylinder and four-cylinder models are available for sale. 2. Pricing strategy: In response to skepticism about three-cylinder engines, the currently available Buick Excelle has reintroduced the 1.5L naturally aspirated four-cylinder engine. In terms of pricing strategy, it remains consistent with the three-cylinder version, with the only difference being whether the engine is a three-cylinder or four-cylinder. Choosing the three-cylinder version of the Buick Excelle currently means enjoying greater discounts. Additionally, in terms of engine performance parameters, the three-cylinder engine, being turbocharged, significantly outperforms the sluggish 1.5L naturally aspirated engine, whether in parameter performance or actual driving power experience.
19
4
Share

Where is the high-speed fan relay located in the Baojun 310W?

The high-speed fan relay of the Baojun 310W is located in the engine compartment fuse box. Wiring connections of the fan relay: The four wires connected to the car's cooling fan relay are: the ground wire from the temperature control switch, the permanent live wire, the relay output wire, and the ignition live wire. Function of the relay: A relay typically consists of a sensing mechanism (input part) that can reflect certain input variables (such as current, voltage, power, impedance, frequency, temperature, pressure, speed, light, etc.); an actuating mechanism (output part) that can control the "on" and "off" of the controlled circuit; and between the input and output parts, there is an intermediate mechanism (driving part) that couples and isolates the input, processes functions, and drives the output part.
15
1
Share

What is the reason for the handbrake malfunction in the Bestune T77?

The causes of the handbrake malfunction in the Bestune T77 include the handbrake not being fully released, insufficient brake fluid, and abnormalities in the braking system. Detailed analysis is as follows: Handbrake not fully released: If the handbrake is released but does not engage the switch properly, the driver should repeatedly confirm whether the handbrake is fully engaged. Insufficient brake fluid: When the brake fluid level falls below the safety line, it can cause the handbrake warning light to stay on, or trigger false alarms. During uphill driving or emergency braking, excessive slopes or fluid turbulence may cause false readings on the fluid level indicator. For such occasional alerts, if the brake fluid is slightly low, adding an appropriate amount of brake fluid can turn off the handbrake warning light. Braking system abnormalities: If the handbrake warning light is on along with the brakes feeling either too soft or too hard, or if the brake pedal returns slowly, it is highly likely that there is an issue with the braking system, and it should be inspected as soon as possible.
16
5
Share

What does it mean when the brake pad warning light is on in an Audi A6?

When the brake pad warning light is illuminated, it indicates that the brake pads have worn to their limit and should be replaced at a repair shop as soon as possible. It could also be caused by a broken wiring harness connector of the brake pad warning sensor, which would require immediate inspection. Checking the brake pads: New brake pads are typically about 1.5cm thick. As they wear down through daily friction, when the visible thickness is only about 1/3 of the original, the frequency of inspections should be increased, and preparations should be made to replace them. Important notes: There are small raised indicators on both sides of the brake pads. When the brake pads wear down to be level with these indicators (2-3mm), it means they have reached their limit and must be replaced. Additionally, the replacement interval for brake pads is not fixed and depends on the vehicle's driving conditions, the frequency of brake pedal usage, and the force applied by the driver.
12
1
Share

Can I Get Free Rescue Services with Insurance?

Buying insurance can provide free rescue services. Additional information: 1. Free fuel delivery service: Sometimes you may run out of gasoline and cannot find a gas station immediately. In such cases, you can contact your insurance company by phone to request free fuel delivery. You only need to pay for the cost of the gasoline. 2. Free water refill service: Similar to the fuel delivery service, when the coolant is insufficient and causes the radiator to overheat, making it impossible to continue driving, do not force the car to run as it may damage the engine. You can also contact your insurance company for a free water refill service. Compared to other rescue companies, this service is more reliable. 3. Free jump-start service: Similar to the fuel and water services mentioned above, insurance companies also provide free jump-start services. This situation might occur more frequently than running out of fuel or overheating, such as when car lights are left on overnight, leading to a dead battery and inability to start the car. 4. Free towing service: The chances of a car breaking down outdoors are not very high, but issues like flat tires or mechanical failures in the powertrain can occur. When the car cannot be driven, towing becomes essential. Some car insurance policies include one free towing service, usually within a 100-kilometer range, where the insurance company provides free towing.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.