Why can't I see clearly when the sun shines on the windshield?

2 Answers
VincentRose
07/24/25 1:11pm
The sun cannot affect the transparency of the glass. The unclear vision is caused by water vapor inside the car. At this time, turning on the fan or air conditioner can solve the problem. Opening the car window is also a method. Here are some related tips for windshield maintenance: 1. Use suitable wiper blades: Use dedicated or appropriate wiper blades and replace them in time (usually once a year) to prevent scratching the windshield. 2. Clean frequently: Keep the windshield clean regularly. If there are debris, try not to use the wiper to remove them. Instead, use a towel or other tools to carefully remove them. 3. Use dedicated glass cleaner: Use car-specific glass cleaner. This can maintain a clear view while increasing lubrication and reducing wear on the windshield.
Was this review help?
14
4
Share
MacJason
08/11/25 7:15am
I've been driving for nearly thirty years, and there are several common reasons why the windshield becomes hard to see when exposed to sunlight: it could be due to oil buildup on the glass surface, including road grime or bird droppings, which scatter light and create glare in the sun; or water spots left by rain, especially noticeable on sunny days after rainfall. A thin layer of dust can also blur visibility. I usually wipe the inner and outer surfaces once a week with professional glass cleaner, avoiding detergents to prevent oily residues. Aging window film should also be checked—consider replacing it with anti-glare film if it's over five years old. When parking, look for shade or a garage to avoid direct sunlight. Cleaning requires attention; otherwise, not only is visibility poor, but the risk of fatigued driving increases. Regular maintenance keeps the glass clear and safe for a long time.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Read the Focus Oil Dipstick?

The correct way to read the Focus oil dipstick is to pull it out when the engine is off, wipe it clean, reinsert it, and then pull it out again. The oil level should not exceed the upper mark. The oil dipstick not only checks the engine oil level but also allows experienced drivers or mechanics to detect various engine operating conditions by inspecting it. The Focus has body dimensions of 4647 mm in length, 1810 mm in width, and 1468 mm in height, with a wheelbase of 2705 mm. The Focus features front-wheel drive, a MacPherson strut front suspension, a torsion beam rear suspension, and a unibody structure.
4
2
Share

Where is the cabin air filter located in the Mercedes-Benz E300?

The cabin air filter in the Mercedes-Benz E300 is located in two places: one is inside the glove compartment in front of the passenger seat, and the other is behind the right front shock absorber mount in the engine compartment. The cabin air filter is an essential component of the vehicle's air conditioning system, as it prevents external impurities from entering and affecting the system's normal operation. Additionally, the cabin air filter helps purify the air to some extent, maintaining a relatively comfortable environment inside the vehicle. The Mercedes-Benz E300 has body dimensions of 4846 mm in length, 1860 mm in width, and 1434 mm in height, with a wheelbase of 2873 mm. The front suspension type is a multi-link independent suspension, the body structure is unibody, the drivetrain options include front-engine rear-wheel drive and front-engine all-wheel drive, with the all-wheel-drive system being full-time four-wheel drive.
6
3
Share

What engine does the Toyota FJ Cruiser use?

The Toyota FJ Cruiser is equipped with a 4.0-liter V6 naturally aspirated engine, delivering a maximum power of 200 kW, a maximum torque of 380 Nm, and a maximum horsepower of 272. In terms of the transmission system, this engine is paired with a 5-speed automatic transmission. The Toyota FJ Cruiser has body dimensions of 4670 mm in length, 1905 mm in width, and 1830 mm in height, with a wheelbase of 2690 mm. The front suspension type is a double-wishbone independent suspension, and the rear suspension type is a four-link mechanism suspension, with a body structure that is non-load-bearing.
5
1
Share

What Causes Starter Freewheeling?

The reasons for starter freewheeling: 1. Excessive wear or broken teeth on the starter drive gear and engine flywheel ring gear; 2. The friction clutch is not intact or effective, and the spring tension does not meet the specified value; 3. Due to long-term use and frequent exposure to high temperatures, the starter shift fork is prone to fatigue, even twisting and deformation, losing its proper function. When starting the engine in a cold or low-temperature condition after the vehicle has been parked for a while, freewheeling may occur. If the engine is started again after stopping for 15 seconds as specified, the freewheeling phenomenon will occur repeatedly. This fault is less common when the engine is warm. Troubleshooting methods: 1. Clean and disassemble the starter, and visually inspect the wear of the shift fork and shift fork ring; 2. While checking the performance of the friction clutch, also inspect the spring extension tension; 3. Inspect the wear degree of the starter drive gear and engine flywheel ring gear separately.
5
3
Share

How Many Kilometers to Replace Brake Pads?

The replacement interval for front brake pads is 30,000 kilometers, while rear brake pads should be replaced every 60,000 kilometers. Symptoms indicating the need for brake pad replacement include: 1. A new brake pad typically has a thickness of about 1.5cm, which gradually wears down with use. When the thickness is reduced to only one-third of the original, immediate replacement should be prepared; 2. Check the brake warning light; 3. If you feel increased effort when braking while driving, needing to press the brake pedal deeper than usual to achieve the same braking effect, or if you notice a significantly lower pedal position during emergency braking, it may indicate that the brake pads have lost their friction and must be replaced immediately.
14
2
Share

Why can't the USB drive be opened in the Lynk & Co 01?

The issue of the USB drive not opening in the Lynk & Co 01 might be due to an incorrect USB drive format or the wrong placement of songs. It could also be a problem with the USB drive itself. It is recommended to reformat the USB drive to FAT32, download music in MP3 format, or try a new, smaller-capacity USB drive. If the problem persists, it is advisable to visit a 4S shop to check the USB interface. The dimensions of the Lynk & Co 01 are 4549 mm in length, 1860 mm in width, and 1689 mm in height, with a wheelbase of 2734 mm. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension, with a unibody structure.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.