···
Log in / Register

Why Can't I Schedule a Subject 3 Driver Training Appointment?

4 Answers
LeArabella
09/07/25 5:08am

Subject 3 driver training cannot be scheduled due to reasons such as insufficient driving course hours, incomplete documentation, pending approval, or system updates. Here is additional information: Specific reasons: One possibility is incomplete documentation or information not yet entered into the system, which temporarily prevents scheduling the test. If the subject course hours have not been reviewed in time, you can schedule the appointment after approval. If the issue is caused by a system update at the vehicle management office, contact your instructor, report to the main driving school, and have the main school contact the examination office. Exam regulations: According to the guidelines, the total required hours for C1 and C2 licenses are 62 and 60 hours respectively, both reduced by more than 10 hours compared to previous requirements. Each hour consists of 60 minutes, with effective teaching time no less than 45 minutes. Each student's theoretical training time must not exceed 4 hours per day, and practical training time must not exceed 4 hours per day.

Was this review help?
19
3
Share
JoshuaRose
09/19/25 4:26am

Hey, I'm also getting my driver's license recently, and it's quite common to struggle with booking the Subject 3 test. The main issue is the exam system gets extremely busy during peak hours—lots of people competing for limited slots, especially after work or on weekends, where spots get snatched up in seconds. Technical glitches are another headache, with the website often freezing or crashing, making it impossible to refresh. Another factor is the lack of driving school resources, with limited instructors and vehicles, leaving students waiting in line for training. I failed multiple times before a friend suggested avoiding peak hours—booking on weekdays during the day turned out to be much easier. It also helps to keep an eye on the driving school’s slot release notifications and set reminders in advance, so you can act as soon as spots open. Getting a driver's license is important, so stay patient and keep trying—you’ll succeed. Don’t rush it; safety comes first. If you can’t book a slot, use the time to review Subject 2 and solidify your skills.

Was this review help?
7
5
Share
Expand All
Sheila
11/02/25 4:49am

As a seasoned driving instructor with years of experience, I've noticed many students struggle with booking the Subject 3 test. The primary issue is system congestion, especially during peak exam seasons when slots are in high demand. Technical glitches like app crashes or server delays further hinder smooth operations. Policy regulations enforcing long intervals between test attempts extend waiting times. Driving schools face resource constraints, with uneven vehicle distribution leading to limited training slots. My advice: avoid peak hours by opting for weekday mornings or afternoons for higher success rates. Follow the school's WeChat official account for new slot announcements and ensure stable internet beforehand. Experience shows persistence breaks bottlenecks. Don't rush safety tests—waiting for the right slot is wisest. Plan wisely to avoid disrupting your overall progress.

Was this review help?
17
1
Share
Expand All
HazelMarie
12/16/25 4:53am

My child can't book the third driving test, but I'm more concerned about safety implications. I heard the exam system is overloaded, automatically locking slots once full. During peak hours, too many people compete simultaneously, crowding the space. Technical glitches like website crashes or login errors often disrupt booking plans. Driving schools face resource shortages, with insufficient instructors and available vehicles prolonging waits. I advised my child not to stress and try again during off-peak hours like weekdays or non-holidays. Policy changes enforcing stricter interval rules now require longer queuing. Regularly check the driving school’s updates to avoid crowds. Patience is key—slots will open eventually, but training quality matters most. Don’t forget to review other subjects to strengthen foundational skills.

Was this review help?
2
0
Share
Expand All
More Forum Discussions

What should be checked when the vehicle arrives at the 4S store?

After the vehicle arrives at the 4S store, inspect the paint surface, tires, and nameplate. The specific details are as follows: Inspect the paint surface: The uniformity and smoothness of the seams are the key points to check. It is best to compare with two vehicles of the same model. The gaps between the doors, bumper, and engine hood should be consistent. If the gaps are too large or the width differs from other vehicles, choose carefully. Inspect the tires: The sidewalls of new car tires should have no damage, and the front tire sidewalls and tread should show no puncture marks. It is best if the tire hairs on both front and rear tires are intact, at least the rear tire hairs should be visible. If there are no traces of tire hairs on the front and rear wheels but the odometer shows only a few kilometers, it is abnormal. Inspect the nameplate: Each vehicle's nameplate corresponds to the unique engine number and chassis number of the vehicle. Verify these numbers with the certification code to ensure consistency. Check the manufacturing date on the nameplate; the gap between the delivery time and the manufacturing time should not exceed three months.
3
1
Share

How Often Should a Car's Air Conditioning Be Recharged with Refrigerant?

How often a car's air conditioning needs to be recharged with refrigerant mainly depends on the usage level of the air conditioning system. Generally, it is recommended to recharge once a year, while a well-functioning air conditioning system may only need a recharge every three years or so. Below is additional information: 1. Considerations: Before recharging the car's air conditioning with refrigerant, it is essential to determine whether the system is low on refrigerant. There are many reasons why an air conditioning system may not cool properly, such as refrigerant leaks, clogged air filters, wear and tear in older units, or improperly sealed doors and windows. 2. Notes on refrigerant recharge: There are two methods for recharging refrigerant into the air conditioning system: high-pressure side charging and low-pressure side charging. These are two entirely different methods, with one involving liquid refrigerant and the other involving gaseous refrigerant. High-pressure side charging is typically used for initial charging, involves liquid refrigerant, and is relatively quick and safe. Low-pressure side charging involves gaseous refrigerant, is a slower process, and is generally used for topping up the system.
11
4
Share

What Causes Steering Wheel Vibration at High Speeds in Small Cars?

Steering wheel vibration at high speeds in small cars is mostly caused by issues with the car's tires. When the mass distribution of the tire is uneven, it creates dynamic imbalance when the wheels rotate at high speeds, leading to severe steering wheel vibration during driving. In such cases, a four-wheel alignment and dynamic balancing of the tires are required, and in severe cases, the tires may need to be replaced. Below are the functions of car tires: 1. Support the entire weight of the vehicle: Car tires bear the full weight of the vehicle, withstand the load, and transmit forces and moments in other directions. 2. Improve vehicle performance: Car tires transmit traction and braking torque to ensure good adhesion between the wheels and the road, enhancing the vehicle's power, braking, and off-road capabilities. They also work with the suspension to absorb shocks and dampen vibrations during driving. 3. Prevent premature damage to vehicle components: Car tires protect vehicle components from severe vibrations and early damage, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.
18
2
Share

Which Button is the Car Air Conditioner Switch?

The car air conditioner switch is the A/C button, which is the cooling switch. Pressing the A/C button activates the compressor, commonly referred to as turning on the cold air. Below is some additional information: 1. Components: The car air conditioner mainly has three basic adjustments: air volume, temperature, and air direction. First is the air volume button, also known as the fan speed button, which is represented by a small 'fan' icon. You can select the appropriate air volume by turning the knob. 2. Temperature button: The temperature button is usually displayed as a 'thermometer' or has red and blue color markings on both sides. Turning the knob toward the red area gradually increases the temperature, while turning it toward the blue area does the opposite, gradually decreasing the temperature. 3. Types of buttons: Air direction adjustment typically comes in button or knob forms, which are more straightforward. It is represented by an icon of a 'seated person with air direction arrows,' allowing you to choose between blowing air to the head, head and feet, feet, feet and windshield, or just the windshield. Most vehicles' air conditioner air direction adjustments follow this pattern, with only a few exceptions.
10
2
Share

Does a car need a new battery when it runs out of power?

Not necessarily. There are many reasons for a car battery to run out of power, such as insufficient generator output, leakage in the car body, or unauthorized modifications to the vehicle. However, it could also be due to prolonged use of the battery. If the battery has been used for more than three years, the issue might be with the battery itself. Below is additional information: 1. Determining battery depletion: A car failing to start can be caused by various reasons. First, it's important to determine whether the issue is due to a depleted battery. If the car's dashboard lights, headlights, and horn are functioning normally, and the only problem is the car not starting, it may not necessarily be due to a depleted battery. 2. Checking voltage: Other electrical components require lower operating voltages, but the starter motor cannot start without sufficient voltage. In such cases, the first step is to check whether the starter motor's voltage is the issue, rather than hastily replacing the battery. 3. Checking the starter motor: During the ignition process when starting the car, only the starter motor is involved. Therefore, if the starter motor isn't working and the car fails to start, it can be concluded that the starter motor itself is damaged or lacks sufficient voltage. In reality, the probability of the starter motor being damaged is very low, so this scenario can generally be overlooked, focusing the issue on the battery.
15
2
Share

What are the benefits of HUD?

HUD is the abbreviation of Head Up Display, literally translated as head-up display, also known as flat-panel display. The benefits of HUD are as follows: HUD can project driving information such as vehicle speed and navigation information onto the car's windshield, so that the driver can see the relevant information without lowering his head, and can focus more on observing the road ahead and surrounding vehicles, and can reduce the visual fatigue caused by the driver switching between frequently looking up to watch the distant road and looking down to check the navigation, thereby improving driving safety, especially at night and during high-speed driving.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.