Why can't a motorcycle battery be charged after not being used for a year?

1 Answers
EvelynRose
07/29/25 5:00pm
Motorcycle battery cannot be charged after not being used for a year because the charger may think the charging clamps are not connected to the battery terminals after the battery is over-discharged. Reasons for motorcycle battery losing power: If the battery has not been maintained, the acid inside the battery may be depleted, or the lack of distilled water and electrolyte can also cause the battery to lose power. How to handle a motorcycle battery losing power: You can check if the battery fluid is low. If it is, you can add distilled water or battery electrolyte yourself, and there is no need to replace the battery if it is not damaged. Just use the motorcycle regularly and try to avoid driving with the headlights on for long periods at night to prevent the battery from losing power. This way, the battery can remain charged for a long time.
Was this review help?
20
0
Share
More Forum Discussions

What to Do When the Volkswagen Trunk Won't Open?

Use a key or other sharp object to pry open the outer shell, revealing the trunk's locking mechanism, then gently pull it. If the Volkswagen trunk won't open, it could be due to a dead remote key battery or poor signal. Simply replace the battery or use the key to open the trunk. Sometimes, pressing the central trunk unlock button will cause the trunk to pop open.
17
0
Share

How to Activate One-Touch Window Control in Lamando?

Press the button to the first detent position (excessive force will reach the second detent), then release when the window reaches the desired position. Alternatively, press to the second detent position to automatically lower the window completely. Pull the button to the first detent position (excessive force will reach the second detent), then release when the window reaches the desired position. Briefly pull the switch to the second detent to automatically close the window.
6
2
Share

How to Turn Off the Interior Light in an Audi That Stays On?

If the overhead interior light stays on, switch the overhead light control to OFF, and the light will turn off. It might also be that the switch is set to DOOR mode; opening and then closing the door again can turn the light off. If the light remains on even when the switch is in the OFF position, it could be that the switch isn't fully engaged. Try moving the switch to ON and then back to OFF.
14
4
Share

How to switch the dashboard display from English to Chinese?

First, press the start button to ignite the car engine, otherwise adjustments cannot be made. Then, click the "+" key on the volume button three times. Press the settings button on the left side of the multifunction steering wheel to enter the dashboard settings function. Select Chinese in the displayed English-Chinese switch interface on the dashboard. Finally, click the OK button on the right side of the multifunction steering wheel to complete the English-Chinese switch.
7
1
Share

How to Remove the Center Armrest of Magotan B7?

Lift up the fabric cover inside. Use a 10# tool to remove the two 10# screws and store the fixing screws properly. Then firmly pull the gear lever handle upwards to release it from the fixing clip. The central gear shift panel is surrounded by clips, simply pull upwards sequentially to release them. Finally, there is a connector underneath the panel, unplug it to remove the armrest completely.
15
5
Share

How to Tell if the Front Film is Metallic?

Use two glass cups and pour disinfectant into both. Cut a small corner of the film that contains certain metal components and soak it; fake metallic films will start to develop white edges around the perimeter. Use two glass cups and pour disinfectant into both. Cut a small corner of the film that contains certain metal components and soak it; fake metallic films will start to develop white edges around the perimeter.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.