Why can't a BYD car start even though it has power?

What is the usage of the Envision's gear positions?

The usage of the Envision's gear positions is: P gear is the parking position, D gear is the automatic forward gear, N gear cuts off the engine power and can be used when parking or towing, R gear is the reverse gear used when reversing, and L gear is the high-torque position suitable for low-speed climbing. Taking the 2020 Envision as an example, it belongs to the midsize SUV category with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase of 2750mm, and a fuel tank capacity of 66L. The 2020 Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 250Nm.

6

5

Share

Which country is Peugeot from?

Peugeot is from France. The models under the Peugeot brand include: Peugeot 5008, Peugeot 4008, Peugeot 3008, Peugeot 2008, Peugeot 208, Peugeot 408, etc. Taking the 2020 Peugeot 408 as an example, its body dimensions are: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53l, and luggage compartment capacity 455l. The 2020 Peugeot 408 is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 136ps, maximum power of 100kw, maximum torque of 230nm, and is paired with a 6-speed dual-clutch transmission.

18

2

Share

Where is the fuse box of the Bestune X40?

The fuse box of the Bestune X40 is located on the left side of the dashboard. The fuse box is responsible for transmitting driving information to various parts of the vehicle body and is a key component in the automotive electronic control system. Taking the 2019 Bestune X40 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4310mm in length, 1780mm in width, and 1680mm in height, a wheelbase of 2600mm, and a fuel tank capacity of 50 liters. The 2019 Bestune X40 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 114 PS, a maximum power of 84 kW, and a maximum torque of 115 Nm.

18

4

Share

Where is the location to add coolant in a Mercedes-Benz?

The location to add coolant in a Mercedes-Benz is behind the left headlight in the engine compartment. The functions of coolant are: 1. To provide anti-corrosion protection for the components of the cooling system; 2. To prevent scale formation, avoiding the reduction of the radiator's cooling efficiency; 3. To ensure the engine operates within the normal temperature range. Models under the Mercedes-Benz brand include: Mercedes-Benz GLS, Mercedes-Benz GLE, Mercedes-Benz GLC, Mercedes-Benz GLA, Mercedes-Benz CLA, etc. Taking the 2021 Mercedes-Benz GLS as an example, it is a mid-to-large-sized car with body dimensions of: length 4988mm, width 1890mm, height 1424mm, and a wheelbase of 2939mm.

8

2

Share

How to Remove the Rear Seat Backrest of a Besturn B50?

The method to remove the rear seat backrest of a Besturn B50 is as follows: 1. Remove the rear seat and locate the two screws underneath; 2. Then unscrew and remove the screws, pull the backrest slightly forward after removal, and lift it upward; 3. If it cannot be lifted, check the trunk to see if it is stuck. After releasing, lift the backrest forcefully upward to successfully remove it. Taking the 2019 Besturn B50 as an example, it belongs to the compact car category, with body dimensions of: length 4695mm, width 1795mm, height 1460mm, a wheelbase of 2725mm, a fuel tank capacity of 58 liters, and a curb weight of 1365kg. The 2019 Besturn B50 is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum power of 80kW, a maximum torque of 155Nm, and is paired with a 5-speed manual transmission.

4

1

Share

What is the Method to Determine the Quality of Shock Absorbers?

The methods to determine the quality of shock absorbers are: 1. Drive the car on a road with poor conditions for 10 kilometers, then stop and touch the shock absorber housing with your hand. If it is not hot enough, it indicates there is no resistance inside the shock absorber, meaning the shock absorber is not working; 2. Press the bumper forcefully and then release it. If the car bounces 2 to 3 times, it indicates the shock absorber is working well; 3. When the car is driven slowly and emergency braking is applied, if the car vibrates violently, it indicates there is a problem with the shock absorber. The working principle of shock absorbers: When relative movement occurs between the frame or body and the axle due to vibration, the piston inside the shock absorber moves up and down. The oil in the shock absorber chamber repeatedly flows from one chamber to another through different pores. The friction between the pore walls and the oil, as well as the internal friction between oil molecules, creates a damping force that converts the car's vibration energy into heat energy of the oil, which is then absorbed by the shock absorber and dissipated into the air.

8

2

Share

Why can't a BYD car start even though it has power?

What is the usage of the Envision's gear positions?

Which country is Peugeot from?

Where is the fuse box of the Bestune X40?

Where is the location to add coolant in a Mercedes-Benz?

How to Remove the Rear Seat Backrest of a Besturn B50?

What is the Method to Determine the Quality of Shock Absorbers?

What are the types of car transmissions?

What is the function of windshield washer fluid?

How to start a Honda CRV?

What is an AT Transmission?