Why Are Used Nissan Teanas So Cheap?

3 Answers
AlexAnn
07/23/25 10:53pm
Because used cars are priced based on the cheapest model available, and the quoted prices for used cars are the lowest possible, not the actual transaction price. Additionally, they are often discounted by 20% upon leaving the dealership. For example, if an owner buys a new car and decides to sell it immediately after leaving the 4S store, the price of the car will be calculated from the lowest possible price and then discounted by 20%. Below is some relevant information about the Nissan Teana: Body Dimensions: The 2019 Nissan Teana (ALTIMA) has a length, width, and height of 4901/1850/1447 mm, with a wheelbase of 2825 mm. Compared to the older model (2016), the length and width have increased by 10 mm and 20 mm, respectively, while the height has decreased by 43 mm, and the wheelbase has increased by 50 mm. The 2016 Nissan Teana (TEANA) has dimensions of 4891/1830/1490 mm and a wheelbase of 2775 mm. Exterior and Interior: The 2019 all-new Nissan Teana (ALTIMA) is based on the Vmotion 2.0 concept car, featuring a more sporty exterior design with a "small ducktail" rear spoiler. The interior has also been completely redesigned, including an 8-inch floating touchscreen infotainment system, a three-spoke flat-bottom multifunction steering wheel, and traditional analog instrument dials. Powertrain: It is equipped with either a 2.0T turbocharged engine or a 2.5L naturally aspirated engine, with maximum power outputs of 248 horsepower and 188 horsepower, respectively, and peak torques of 370 Nm and 244 Nm.
Was this review help?
20
5
Share
DelOlivia
08/10/25 6:39pm
From the perspective of a seasoned driver who frequently changes cars, having driven various vehicles for over a decade, I believe there are several key reasons for the low resale value of the Nissan Teana (Altima). First, its high ownership volume—Nissan Teana sells in large quantities domestically, and abundant supply naturally keeps prices down, unlike rare models that hold their value better. Second, rapid model updates mean older Teanas lag in technology, such as higher fuel consumption compared to today’s new energy vehicles, making buyers prefer newer models. Third, brand positioning plays a role: while the Teana offers comfort and spaciousness, Nissan isn’t a premium brand, so competitors like the Toyota Camry or Honda Accord in the same segment are more sought-after in the used market, often leading to lower offers for the Teana. Additionally, though maintenance costs are low, frequent new-car price cuts drag down its used-car starting price. If you’re considering buying one, prioritize well-maintained units with good service records—don’t just chase the lowest price, as poorly maintained cars can be costly to repair.
Was this review help?
19
3
Share
Expand All
DeNoah
09/23/25 7:00am
As a frequent visitor to repair shops, whenever I come across a Nissan Teana, I analyze why it's so cheap in the used car market. The core issue is reliability. The Teana generally has few minor issues, but its parts are cheap and easy to replace, unlike luxury cars that rely on scarcity to drive up second-hand prices. Additionally, the market competition is fierce, with other brands like the Volkswagen Passat being more popular, giving buyers plenty of choices and dispersing demand. Its fuel efficiency is average, especially in urban driving where it feels underpowered, making it less appealing to younger buyers. New model releases also cause older versions to depreciate quickly. Moreover, the Teana's exterior design is somewhat bland and not trendy enough to attract attention, which dampens market enthusiasm. From a repair perspective, I recommend checking the transmission and suspension when buying a used Teana—once common wear points are addressed, it truly offers great value for money.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Start a Nissan Sylphy Automatic Transmission?

Starting steps for Nissan Sylphy automatic transmission: First, press the start button, step on the brake, then shift from P to D gear, release the brake, and start. Below is an introduction to starting an automatic transmission: 1. The driver sits properly in the driver's seat, without stepping on the brake, directly presses the start button, at this time the ACC light turns on, press the start button again, and the vehicle performs a self-check. Note: It is recommended not to skip the self-check step every time during a cold start, while a hot start can choose to skip. 2. Step on the brake, then press the start button to ignite and start. Normally, pressing the ignition switch for 3 seconds can start the engine. If the engine is difficult to start, do not start frequently; let the engine rest for a while every 5 attempts to avoid burning out the starter. 3. Release the foot brake. You can choose to warm up the car in place, and the time can be determined according to the environment. Specifically, you can look at the water temperature gauge on the dashboard. When the water temperature reaches and stabilizes at around 90 degrees, it means the warm-up is complete. 4. Step on the foot brake again, shift to D gear, and release the handbrake. Before starting, observe the road conditions clearly through the rearview mirror to see if it is suitable to start, and also honk the horn and turn on the turn signal to alert other vehicles and pedestrians. 5. Slowly release the foot brake and start. After starting, you should quickly enter the road and drive at the prescribed speed.
14
5
Share

What are the differences between sedans and SUVs?

The differences between sedans and SUVs: 1. Chassis. Sedans have lower chassis, which results in a lower center of gravity, leading to smaller vehicle tilt angles when turning; SUVs have higher chassis, enabling them to adapt to various road conditions. 2. Seat comfort. SUVs lean towards a sporty style, so their seats are designed to be firmer; sedans focus more on passenger comfort, hence their seats are generally softer. 3. Fuel consumption. SUVs are typically designed with some off-road capabilities in mind, making them heavier than sedans and often equipped with larger engine displacements, resulting in higher fuel consumption compared to sedans.
13
4
Share

Can I delay my driver's license inspection for a few days?

According to regulations, it is best to handle the driver's license inspection in advance and try not to delay it. If delayed, it should not exceed one week at most; otherwise, the driver's license may be revoked. Here are the relevant details: 1. Regulations: Article 42, Paragraph 1, Item (5) of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" by the Ministry of Public Security stipulates that if a driver's license is not renewed for more than one year after its expiration, the vehicle management office shall cancel the motor vehicle driver's license. 2. Driver's License Review: According to the new regulations of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" by the Ministry of Public Security effective from May 1, 2012: for licenses a1, a2, a3, b1, and b2, in addition to providing physical examination information every two years, an annual driver's license review is required (the duplicate of the driver's license must be printed by the vehicle management office). 3. Free Re-inspection: For original driving license categories c, d, e, and f, if the inspection is overdue after May 2002 (inclusive), and for original driving license categories a and b, if the inspection is overdue for no more than one year, providing one copy each of the "Motor Vehicle Driver's License Application Form" and a copy of the driver's license (with a and b licenses also providing physical condition proof), a free re-inspection can be processed.
18
1
Share

Where is the most suitable location to install the ETC device?

ETC devices are generally installed at the top of the car's windshield, as long as it does not obstruct the driver's view. Definition of ETC: ETC stands for Electronic Toll Collection, which translates to a non-stop electronic toll collection system. Below are the steps on how to apply for ETC: 1. Users should bring the required documents to an ETC customer service center to apply for an ETC card and OBU service. 2. The staff at the ETC customer service center will review the documents. 3. The staff will register the information and provide the service. 4. The user pays the relevant fees. 5. The user collects the ETC card and OBU electronic tag. 6. The user brings the device to a designated location where the staff will install it.
4
5
Share

What is the Yingbao car?

Yingbao is a compact car under GAC Trumpchi. Exterior Introduction: In terms of exterior design, the GAC Trumpchi Yingbao adopts the "Light Sculpture Surface" design language, offering two exterior styles: Sport Edition and Luxury Edition. The body dimensions are 4700mm*1850mm*1432mm. Specifically, the Sport Edition features a large hexagonal front grille with a vertical waterfall-style design. Inside the grille, there are two blue polygonal decorative elements resembling fighter jet air intakes, accented with carbon fiber-like materials. Configuration Parameters: The Yingbao is equipped with the all-new third-generation 1.5TGDI engine from the Julang Power series, delivering a maximum power of 130kW and a peak torque of 270N.m. With GCCS technology at its core, it integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large inertia balance shaft, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L per 100km. The transmission efficiency reaches up to 96%, with a shift time of just 0.2 seconds. In the 0-100km/h acceleration test, the fastest recorded time was 6.95 seconds.
18
5
Share

What Causes the Feeling of Scrubbing Under the Car Chassis When Braking?

The reasons for feeling scrubbing under the car chassis when braking: 1. The brake discs or pads may produce noise due to rust or hard spots, which usually occurs when the vehicle first starts moving and improves after a few brake applications. 2. Noise from the suspension system and pressure bearings, as rubber components age and harden, causing noise when braking due to force, which may improve after the car warms up. 3. A faulty brake caliper, leading to noise; check if the brake caliper is malfunctioning. 4. Noise from friction between the brake disc and brake pads, possibly caused by moving interference between rotating components like wheels or axles and other related parts or foreign objects nearby.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.