Why are there fewer buyers for the imported Tiguan?

1 Answers
PrestonLee
07/30/25 9:34am
The reason fewer people buy the imported Tiguan is due to its lack of price advantage. Below are the detailed specifications of the imported Tiguan: 1. Safety Features: The Tiguan comes standard with side airbags + curtain airbags + knee airbags, electronic stability control, electronic differential lock, pre-collision safety + low-speed braking, lane keeping assist, auto hold, tire pressure monitoring, fatigue warning system, and cruise control. The 330TSI Trendline model and above add hill descent control to the aforementioned features, while the two higher-end models also include blind spot monitoring + lane change assist + rear traffic alert, parking assist, and a rearview camera. 2. Powertrain: It is equipped with 1.4T and 2.0T low/high-power engines, corresponding to the 280TSI, 330TSI, and 380TSI model badges, with maximum output power of 150 hp, 180 hp, and 220 hp, respectively. The transmission system is matched with a 6-speed wet dual-clutch (1.4T models) and a 7-speed wet dual-clutch gearbox (2.0T models). All three 2.0T models also come standard with the 4MOTION all-wheel-drive system.
Was this review help?
15
1
Share
More Forum Discussions

How often should refrigerant be added to a car?

Refrigerant in a car should typically be added every 2 to 3 years, and its primary function is to lower the temperature of the air inside the vehicle. Here are methods to determine if your car needs refrigerant: 1. Turn on the air conditioning for a while—if it quickly reaches the set temperature, it indicates normal operation; otherwise, refrigerant may need to be added. 2. Use a thermometer to measure the temperature difference between the air intake and outlet of the indoor unit—if the difference is less than approximately 8 degrees Celsius, refrigerant may need to be added. The steps for adding refrigerant to a car are as follows: 1. Prepare the necessary tools and materials, such as a car refrigerant recovery and filling machine and refrigerant. 2. Connect the hoses of the refrigerant recovery and filling machine to the high and low-pressure pipes of the car's air conditioning system. 3. Perform a vacuum process on the car's air conditioning system. 4. Set the filling capacity, time, and type on the refrigerant recovery and filling machine. 5. The refrigerant recovery and filling machine will then automatically begin adding the refrigerant.
18
4
Share

How Can Beginners Overcome the Fear of Driving?

Methods for beginners to overcome the fear of driving include: 1. Have an experienced driver accompany you; 2. Improve your ability to judge distances; 3. Listen to music while ensuring full concentration on driving to alleviate nervousness; 4. Familiarize yourself with the operation of all vehicle functions; 5. Practice in areas with fewer cars and people; 6. Drive slowly and control your speed. Precautions for beginner drivers are: 1. Slow down and observe left and right when crossing intersections; 2. Reduce speed and check carefully when turning; 3. Maintain a safe driving distance; 4. Avoid occupying two lanes for a long time; 5. Wear glasses if you are nearsighted; 6. Do not drive under the influence of alcohol.
14
1
Share

How Many Layers Does Automotive Paint Consist Of?

Automotive paint consists of 4 layers, which are the electrocoat layer, primer layer, basecoat layer, and clearcoat layer. Methods for maintaining car paint include: 1. Promptly remove snow, rainwater, and other dirt from the car surface to keep the paint clean and aesthetically pleasing; 2. Apply wax to the car body to protect the paint, preventing cracking, corrosion, and rusting; 3. Regularly inspect the car body surface, and promptly repaint any damaged, scratched, or exposed areas; 4. Use specialized detergents and neutral water to wash the car body; 5. Wipe the car body with a soft cloth or sponge to avoid mixing in metal shavings and sand particles. The main paint processes include: 1. Electrocoat: functions to prevent rust and corrosion; 2. Primer: functions to resist UV rays and stone chipping, providing a base for the basecoat; 3. Basecoat layer: functions for aesthetics; 4. Clearcoat layer: functions to give the car body gloss and resistance to stone chipping.
9
1
Share

How to Solve Parking Assist System Malfunction?

Parking assist system malfunctions require inspection and repair at an authorized car 4S dealership. The functions of the parking assist system are: 1. The system measures the parking space and calculates the required distance to park between two vehicles; 2. The control unit uses position sensors installed on the front and rear bumpers to measure the distance of parked vehicles around the parking space; 3. When there is sufficient space for parking, the system emits an audible signal to notify the driver, who can then activate the parking assist system after stopping; 4. During the operation of the parking assist system, the driver does not need to turn the steering wheel; 5. The automatic control system can manage the entire vehicle steering process. If the driver needs to take control, simply turning the steering wheel will automatically deactivate the parking system.
1
3
Share

How to Determine When a Car Battery is Fully Charged?

Methods to determine if a car battery is fully charged include: 1. Using a multimeter to measure the voltage; a reading above 12.5 volts indicates full charge; 2. Observing the ammeter value on the charger or the indicator light on the charger. Methods for maintaining a car battery include: 1. Charging promptly when the ammeter shows insufficient charge; 2. Adjusting the electrolyte density according to standards based on different regions and seasons; 3. Adding distilled water or a specialized replenishing solution when the electrolyte is low; 4. Limiting the total engine start time to no more than 5 seconds each time; 5. Starting the car periodically if the battery is unused for a long time; 6. Regularly checking if the small holes on the battery cover are ventilated; 7. Inspecting the battery's positive and negative terminals for signs of oxidation; 8. Checking all parts of the circuit for any signs of aging or short circuits.
5
0
Share

What Tier Does Tesla Belong To?

Tesla vehicles are positioned in the high-end segment. Taking the Tesla Model S as an example, it is a 5-door, 5-seater SUV with body dimensions of 4979mm in length, 1964mm in width, and 1445mm in height, featuring a wheelbase of 2960mm, front track of 1662mm, and rear track of 1700mm. The Tesla Model S is equipped with an electric single-speed transmission, adopts a dual-motor all-wheel-drive system with electric all-wheel drive (AWD), and features a suspension system comprising double-wishbone independent front suspension and multi-link independent rear suspension. It utilizes electric power steering and ventilated disc brakes.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.