Why are there fewer buyers for the BMW 4 Series?

1 Answers
NathanAnn
07/29/25 5:07pm
BMW 4 Series has fewer buyers because of its high price. Here are specific details about the BMW 4 Series: Background: BMW has confirmed that it will follow the 5 Series GT by introducing a GT version for the new generation 3 Series, but this new five-door luxury hatchback will not be named the 3 Series GT, instead, it will be called the 4 Series. Here is additional information: Overall: The BMW 4 Series Coupe concept inherits the fine tradition of BMW coupes, with a short front overhang, smooth waistline, and the classic Hofmeister-Knick forming a beautiful and dynamic exterior. At the same time, the latest sinking front design and the side inverted "L"-shaped air intakes bring new dynamic elements. The front face adopts the design concept of the 3 Series, with the headlights and grille integrated, but the new headlight design on the coupe is sharper, with LED daytime running light strips extending to the grille, which becomes more three-dimensional. The design inspiration for the integrated front bumper also comes from the new 3 Series, but the refined treatment results in better visual effects.
Was this review help?
18
5
Share
More Forum Discussions

What is the appropriate tire pressure for a van?

The appropriate tire pressure for a van is between 2.3 and 2.5 bar. Instruments for checking tire pressure include: 1. Tire pressure monitoring system; 2. Handheld tire pressure gauge; 3. Air pump with integrated pressure gauge. The steps for supplementing tire pressure are: 1. Remove any debris from the tire valve core; 2. Inflate to replenish pressure; 3. Check for leaks in the valve core and securely fasten the valve cap. Methods for maintaining van tires include: 1. Regularly check tire pressure; 2. Periodically inspect tires for bulges, cracks, cuts, punctures, and abnormal wear; 3. Remove stones, metal pieces, and nails from tire treads; 4. Perform four-wheel alignment or tire balancing.
12
1
Share

What is the method for car navigation modification?

The method for car navigation modification is: 1. Pry up the decorative strip and pull up the clips of the decorative strip; 2. Remove the screws of the panel and the center console base, then lift the tail of the center console base upwards; 3. Pull the center console base panel backward to separate it from the vehicle audio; 4. Disconnect the power cord of the vehicle panel and remove the head unit; 5. Connect the GPS antenna and power tail wire behind the TFT screen; 6. Install the panel and storage box. Car navigation consists of a chip, antenna, processor, memory, display screen, speaker, buttons, expansion function slots, and map navigation software. The function of car navigation is positioning, monitoring, and navigation.
8
3
Share

What is the high beam bulb model for Baojun 560?

Baojun 560 high beam bulb model is H9, and its functions are: 1. To expand the driver's field of vision; 2. To remind oncoming vehicles for improved driving safety. Taking the 2017 Comfort model Baojun 560 as an example, its body dimensions are: length 4620mm, width 1820mm, height 1750mm, with a wheelbase of 2750mm, a fuel tank capacity of 52 liters, and a trunk capacity of 460 liters. The 2017 Comfort model Baojun 560 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 137PS, a maximum power of 101kW, and a maximum torque of 186Nm.
4
1
Share

What does the ESC button in a car mean?

ESC button in a car refers to the Electronic Stability Control system, which consists of a central control unit, steering sensor, wheel sensor, skid sensor, lateral acceleration sensor, and actuator. The working principle of the ESC button is: 1. When the ignition switch is turned on, the ESC system's controller ECU performs a self-test program during the ignition cycle; 2. It checks whether there are any faults in the ABS, ASR, or ESP systems; 3. The ESC control unit calculates the vehicle's specified steering and driving characteristics, as well as the actual driving state of the vehicle, based on the information; 4. Through calculation and monitoring, it determines the driver's steering input for stable driving and the actual driving state of the vehicle.
6
4
Share

Methods to Remove Bubbles from Car Film

Methods to remove bubbles from car film are: 1. Place the car under sunlight or use a hairdryer to heat the surface; 2. Poke a small hole in the bubble with a needle and smooth it out with a card. Methods to remove car film are: 1. Use a wallpaper knife to lift a corner; 2. Peel off the film; 3. Clean off the adhesive with gasoline. Methods to apply car film are: 1. Install interior protection for the vehicle; 2. Cut the car sun film according to the window size; 3. Clean the front and rear window glass; 4. Use a heat gun to shape the film; 5. After heat shaping, trim the film finely and complete the installation. The functions of car film are: 1. Prevent scratches on the vehicle; 2. Block ultraviolet rays; 3. Reduce interior temperature; 4. Maintain glass clarity.
5
4
Share

What is the model of the high beam light for the Baojun 560?

The high beam light for the Baojun 560 is the H9 model. Its functions are: 1. To expand the driver's field of vision; 2. To alert oncoming vehicles and pedestrians, thereby enhancing driving safety. Taking the 2017 Elite model of the Baojun 560 as an example, its body dimensions are: length 4620mm, width 1810mm, height 1765mm, with a wheelbase of 2750mm, a fuel tank capacity of 52 liters, and a trunk capacity of 460 liters. The 2017 Elite model of the Baojun 560 features a MacPherson strut front suspension and a trapezoidal link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 230 Nm.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.