Why are there few buyers for the Audi S3?

1 Answers
NevaehRose
07/30/25 3:46am
Because its exterior looks just like the A3, and it is not practical at all. Here are the specific details regarding the reasons: Reasons: 1. Outdated interior, 2. Limited space, 3. EA888 engine technology is outdated, 4. The old model has been discontinued and the new one hasn't arrived yet, 5. The exterior looks identical to the A3, 6. There are many used car options within the same price range. Introduction: The design of the Audi S3 is not much different from the standard A3 Limousine sedan model, but more sporty design elements can be seen in the details. The prominent S badge on the single-frame grille and the chrome-plated dual-bar grille seem to tell others that this is a performance car. The fog light surrounds are also paired with chrome materials and honeycomb-style decorations, greatly enhancing the visual impact. The slightly raised rear skirt design and the dual oval-shaped exhaust tailpipes on both sides significantly enhance the three-dimensional feel of the entire vehicle.
Was this review help?
11
3
Share
More Forum Discussions

What is the maximum wading depth for the Wuling Zhiguang?

The safe wading depth for the Wuling Zhiguang is 26 centimeters. Here are the relevant details: 1. Impact: Problems can occur if the water level rises above the tires. The greatest risks during vehicle wading are damage to the engine and electrical systems. Water entering the engine intake can directly affect the engine, and the electrical systems are highly sensitive to water. Therefore, the water level must never exceed the tires, as this could lead to water entering the cabin or the engine. 2. Precautions: If the vehicle stalls while wading, do not attempt to restart it. Forcing a restart can cause the engine to ingest more water, leading to severe damage. Theoretically, the water should not submerge the engine intake. The engine intake is located at the front grille radiator. The water level, including waves created while moving, should not exceed the area from the front bumper to the lower edge of the grille, as this is the tolerable range.
5
3
Share

Does Using Air Conditioning in New Energy Vehicles Consume a Lot of Electricity?

For gasoline-powered vehicles, turning on the air conditioning increases fuel consumption by 1-2 liters per 100 kilometers, and the fuel consumption is 1-2 liters per hour when idling with the air conditioning on. In contrast, electric vehicles use the battery pack to supply power to both the air conditioning system and the powertrain separately, which does not increase the burden on the electric motor. Regardless of the driving speed, the air conditioning consumes 1.62 kWh per hour. The advantages of new energy vehicles are as follows: 1. Low operating costs: For example, the BAIC EU260 has costs similar to the price of 1 liter of fuel. 2. No license plate restrictions: Those who have participated in BAIC New Energy's ternary test drive events know that the biggest advantage of new energy vehicles is the absence of license plate restrictions in large cities. 3. Stable driving with no gear shift impact: Since most new energy vehicles use a single-speed transmission, they generally do not experience gear shift impacts. 4. More environmentally friendly: Finally, the primary design function of new energy vehicles is environmental friendliness. They use electricity as the main power source, saving a significant amount of fuel and contributing to environmental protection efforts.
20
3
Share

Driving Test Subject 2 Tips?

Driving Test Subject 2 Tips 58 Auto recommends keeping the speed slow and staying calm. Below are specific tips for Driving Test Subject 2: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. As long as the car doesn't stop, try to keep the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, be sure to adjust the rearview mirrors properly, as this is particularly important for reversing into a parking space and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately identify and observe these points to ensure precise execution. 4. Pay attention to the four corners of the car: The front corner of the car is prone to crossing the outer line when reversing into a parking space, while the rear corner is prone to crossing the side lines of the parking space. The front corner may go out of line during curve driving and right-angle turns. During parallel parking, the front corner may cross the outer line or the left front corner of the parking space, while the right rear corner may cross the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.
14
2
Share

What Causes Strong Urea Smell in China V Vehicles?

The reason for strong urea smell in China V vehicles is the complete combustion of urea fuel. Below are relevant introductions about automotive urea: 1. Measures to take when discovering trucks not consuming automotive urea: If it is found that automotive urea has not been consumed at all, or when the vehicle emission light comes on, it may indicate that the vehicle's SCR system has stopped working (commonly referred to as not "burning" urea). This issue cannot be resolved by oneself and requires immediate professional inspection and repair at a 4S shop. Possible causes include damaged urea pump, blocked urea pipelines, or clogged nozzles. 2. Consequences of trucks not consuming automotive urea: Diesel vehicles without urea will have extremely adverse effects on the ecological environment, which is also not permitted by national laws and regulations. This is not directly caused by the lack of automotive urea, but when the engine's electronic control system detects no urea injection and excessive tailpipe pollution, it will forcibly limit the engine's torque output. Damage to the SCR injection system: Long-term absence of urea may lead to crystallization and blockage of the nozzles, pipelines, and urea pump in the SCR system, or damage due to high temperatures.
16
1
Share

Does passing through ETC scan the license plate or the device?

Passing through ETC scans the device. The onboard electronic tag installed on the vehicle's windshield communicates with the microwave antenna in the ETC lane of the toll station via dedicated short-range communication. This process utilizes computer networking technology to perform backend settlement processing with the bank, allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping, thereby minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
18
5
Share

What Causes the Abnormal Noise When Braking in an Audi A4?

Audi A4 may produce abnormal noise when braking due to worn brake pads, and timely replacement of the brake pads is the solution. Below is a detailed introduction to the Audi A4: 1. Overview: The Audi A4 (Audi-A4) is a B-segment model manufactured by FAW-Volkswagen and launched in April 2003. The new A4 abandons the teardrop headlight design, adds quattro all-wheel drive mode, and features a more stylish and sporty appearance, with outstanding power and handling. 2. Classification: The FAW Audi A4 can be broadly categorized into three displacement types: 1.8T, 2.4T, and 3.0T. The 1.8L T is divided into four models: Manual Base, Automatic Base, Comfort, and Technology Leading. The 2.4T is divided into three models: Comfort, Comfort Sport, and Comfort Premium. The 3.0T has only one model, equipped with the quattro all-wheel drive system.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.