Why Are the Brake Lights Still On When the Car Is Off?

Where is the engine of the Bestune T77 produced?

The engine of the Bestune T77 is produced in China. It is independently developed by FAW Group. The engine model is CA4GA12TD, and there are two different configurations available: one is a 1.2-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. Below are the details about these two engines: 1. The 1.2-liter turbocharged engine delivers 143 horsepower and a maximum torque of 204 Nm. The maximum power is achieved at 5500 rpm, and the maximum torque is available between 1600 to 4200 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. 2. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 258 Nm. The maximum power is achieved at 5500 rpm, and the maximum torque is available between 1300 to 4350 rpm. This engine also features direct fuel injection technology and uses an aluminum cylinder head. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission.

16

1

Share

Where is the car door unlock button located?

The car door unlock button is typically located on the driver's side door or the central control area of the vehicle. The central locking system is a control device that simultaneously manages the opening and closing of all car doors, enhancing safety during driving. Vehicle central locking systems first appeared in the 1970s and were initially installed in sedans. After decades of development, this feature has become widely adopted. Automotive central locking systems can be divided into two main categories, as described below: 1. Door Lock Switch: This type of central locking switch consists of two components - a master switch and subsidiary switches. The master switch is located on the driver's side door, while subsidiary switches are installed on each individual door. 2. Door Lock Actuator: This central locking component executes the driver's commands to lock or unlock doors, and can be classified into three types: a. Electromagnetic Type: This actuator features two coils responsible for door locking and unlocking respectively, normally remaining in a neutral position. b. DC Motor Type: More complex in design, this actuator employs a DC motor and transmission mechanism to achieve door locking/unlocking through mechanical force. c. Permanent Magnet Motor Type: Utilizing a permanent magnet stepper motor, this type differs significantly in structure from the previous two, though its function and operating principle remain fundamentally similar.

15

1

Share

What are the symptoms of gear misalignment in a manual transmission?

Gear misalignment in a manual transmission manifests when, under normal clutch conditions, the gear lever cannot engage the desired gear, or cannot return to neutral after engagement, or simultaneously engages two gears, which is referred to as transmission misalignment. The following are the causes of manual transmission misalignment: 1. Wear or detachment of the curved working surface at the lower end of the gear lever, or excessive wear of the gear lever ball head; 2. Loose or worn positioning pin of the gear lever head, or detachment of the positioning pin, or excessive wear of the gear lever ball head; 3. Excessive wear (exceeding 0.02mm) of the lock pin or lock ball in the interlock mechanism of the shift fork shaft, resulting in loss of interlock function. 4. In summary, the main cause of misalignment is the failure of the transmission control mechanism, leading to engagement of an unintended gear instead of the desired one. The following are the troubleshooting methods for misalignment: 1. First, shake the gear lever to check its swing angle. If it exceeds the normal range, the fault is caused by looseness between the gear lever's lower end ball head positioning pin and the positioning groove, or excessive wear of the ball head or ball hole. 2. If the gear lever swings 360°, the positioning pin is broken. If the swing angle is normal but the gear still cannot be engaged or disengaged, the fault is caused by the detachment of the gear lever's lower end from the groove (due to wear of the curved working surface or guide groove). If two gears are engaged simultaneously, the fault is caused by failure of the interlock device.

15

1

Share

What does ESP in a car mean?

ESP is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the car reaches its dynamic limits. The functions of ESP are as follows: 1. Under certain road conditions and vehicle load conditions, the maximum adhesion force that the wheels can provide is a fixed value, meaning that in extreme situations, the longitudinal force and lateral force on the wheels have an inverse relationship. The electronic stability program can independently control the longitudinal braking force of each wheel, thereby influencing the lateral force and improving the vehicle's handling performance. 2. When the longitudinal force reaches its extreme value, the lateral force becomes zero, at which point the vehicle's lateral movement becomes uncontrolled, leading to skidding. In such cases, the vehicle may not be able to change lanes or turn as the driver intends. The electronic stability program can detect and prevent vehicle skidding. When it detects that the vehicle is about to lose control, it applies braking force to specific wheels to help the vehicle move in the direction desired by the driver. 3. During turns, one feasible control strategy is: when the vehicle shows a tendency to understeer, the system can apply braking force to the inner rear wheel of the turn. Since the longitudinal force on this wheel increases, the available lateral force decreases, generating a torque that assists in turning the vehicle. When there is a tendency to oversteer, the system can apply braking force to the outer front wheel of the turn. As the longitudinal force on this wheel increases, the available lateral force decreases, generating a torque that resists turning the vehicle. This ensures driving stability.

15

3

Share

Do You Need to Press the Brake for Automatic Transmission Gear Shifting?

Automatic transmission cars require pressing the brake when shifting gears; failing to do so can damage the automatic transmission. When driving, shifting from D to D3 or D2 does not require pressing the brake. However, if you suddenly shift from D to a lower gear at high speed, the engine RPM will become very high, and the car body will experience significant jerking. When driving at low speeds, you can directly shift to a lower gear. Some cars also have S or M modes, which can be switched to from D mode while driving. Additional Information: 1. D Mode Gear Shifting: When preparing to start driving, after pressing the brake, push the gear lever forward to D mode, then fully release the handbrake, gently press the accelerator, and after the car moves forward a certain distance, release the brake and continue pressing the accelerator. At this point, the car will automatically shift between gears 1 to 4 based on speed. Under normal driving conditions on flat roads, the driver does not need to shift to other gears. 2. When going downhill for a long distance, since the D mode of an automatic transmission car does not have engine braking functionality, do not keep it in D mode. Otherwise, the speed will keep increasing, posing safety risks, and frequent braking will cause the brake pads to overheat and wear excessively. P Mode Parking Gear Shifting: When the vehicle needs to be parked for a long time, especially on a slope, shift to P mode. In this mode, the wheels are mechanically locked, ensuring the vehicle cannot move while stationary. 3. It is important to note that you should shift to P mode after turning off the engine and then remove the key. Shifting to P mode before turning off the engine can damage the transmission gears. Never shift to P mode while the vehicle is moving, as this can cause severe damage to the vehicle.

4

3

Share

How to Quickly Improve Driving Skills?

Methods to quickly improve driving skills are as follows: 1. Before driving; (1) Walk around the car to check the tire conditions and ensure there are no obstacles around the vehicle that may affect driving; (2) Familiarize yourself with various controls in the driver's cabin, such as seat adjustment, how to fasten the seatbelt, and the use of the gear lever. Additionally, you should be very familiar with various dashboard instruments, steering wheel, clutch, brake, accelerator, ignition switch, etc., and be able to operate them correctly. The most important among these is the brake—it's crucial to develop the awareness of pressing the brake under any circumstances; (3) When not driving, mentally rehearse the entire driving process like watching a movie in your mind, and simulate driving actions with your hands and feet. Imagine where to place your hands and feet? How to start the car, how to shift gears, how to release the clutch with your left foot, how to press the accelerator, and how to shift gears and accelerate after the car starts. 2. Driving the car. (1) Find a friend to accompany you as a co-driver and practice on a road with no other vehicles, letting your friend randomly call out "stop" and "go." When your friend says "stop," you must stop the car; when your friend says "go," you must go. Repeat this practice until you can start and stop the car at will without stalling, which will enhance your control over the vehicle; (2) After becoming proficient in driving, develop the habit of observing the road conditions both in front of and behind the car. Remember not to focus only on the front because unexpected situations can come from behind. Therefore, adjust the rearview mirror to a suitable position to observe the rear at all times during driving.

8

1

Share

Why Are the Brake Lights Still On When the Car Is Off?

Where is the engine of the Bestune T77 produced?

Where is the car door unlock button located?

What are the symptoms of gear misalignment in a manual transmission?

What does ESP in a car mean?

Do You Need to Press the Brake for Automatic Transmission Gear Shifting?

How to Quickly Improve Driving Skills?

What brand is Kinergy-EX tire?

What Are the Hazards of Speeding?

Should You Press the Clutch or Brake When Going Downhill?

What is the Transformers car?