Why are so many GPS devices installed in used cars?

2 Answers
LeKyle
07/28/25 11:29pm
There are several reasons for installing GPS trackers in used cars: 1. The previous owner of the car forgot to remove them; 2. It could also be that the car was purchased through a mortgage, in which case the mortgaged vehicle might be required to have a tracker installed. Additional information: Used cars: Typically refer to motor vehicles that can still be used before reaching the national scrapping standards. There are many advantages to buying a used car, including cost-effectiveness, low depreciation rates, and easy availability of parts. Consumers can purchase a higher-grade used car for the price of a new one. The automotive service industry for used cars in the car market is very well-developed, and related car parts are also quite abundant.
Was this review help?
4
1
Share
Dorothy
08/12/25 3:51am
The second-hand car I bought last time was found to have three GPS devices installed, mainly as an anti-theft measure. In the market, second-hand cars are prone to theft, so many owners or dealers install trackers to monitor their location. If the vehicle moves abnormally, such as sneaking away late at night, the app on your phone can sound an alarm and even locate the car in real-time. Some people keep the previous owner's devices after buying a used car and add a new one themselves, ending up with several. I once saw a friend recover their stolen car within two hours thanks to GPS—it's incredibly practical. These devices are now cheaper, and many feel that installing an extra one provides more security. However, remember not to install too many to avoid wasting battery or causing signal interference, and check them regularly to ensure they work properly.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

How to Align the Timing of a Car Engine?

The commonly used method is to find the top dead center of the first cylinder piston, as well as the relevant marks on the crankshaft or flywheel and cylinder block, and adjust them to the appropriate position. Below is a detailed introduction to car engine timing: 1. Timing: It refers to the positional relationship between the movement of the engine pistons and the valves, ensuring that their movements remain synchronized. 2. Timing Belt: An important component of the engine's valve system, it connects to the crankshaft and ensures accurate intake and exhaust timing with a specific transmission ratio. It has a longer service life, more mature technology, lower cost, and less noise, but requires regular inspection and maintenance. 3. Timing Chain: It offers advantages such as compact structure, high power transmission, high reliability and wear resistance, and is maintenance-free for life. However, compared to traditional timing belts, it produces more noise.
7
0
Share

Disadvantages After Replacing the Steering Gear

When certain issues arise with the steering gear, replacement may be necessary for resolution. However, after replacement, symptoms such as heavy steering, abnormal noises, or vehicle deviation may occur. Below are relevant considerations regarding steering gear replacement: 1. Post-replacement issues: (1) Abnormal noises after replacing the steering gear are normal and may be bothersome initially but will gradually diminish over time. (2) Heavy steering and deviation issues may indeed stem from installation techniques, potentially related to the repair shop chosen. If you opt for a reputable, guaranteed 4S dealership or large-scale repair facility, the likelihood of such problems is minimal. 2. Whether to replace: The decision to replace the steering gear should ultimately be based on professional mechanics' advice. While they often recommend direct replacement, this suggestion may involve not only genuine fault factors but also certain profit considerations.
19
2
Share

How to Open the Hood of the Vezel?

The method to open the hood of the Vezel is: 1. Pull the hood release lever inside the cabin to unlock it, then move to the front of the hood; 2. Lift the hood lever by hand to open it. Taking the 2020 Vezel as an example, it is a compact SUV with dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, a wheelbase of 2610mm, a fuel tank capacity of 50 liters, and a curb weight of 1227kg. The 2020 Vezel features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 131PS, a maximum torque of 155Nm, and a maximum power of 96kW, paired with a 6-speed manual transmission.
10
5
Share

Where to Turn On the Mercedes-Benz Radar Distance Measurement?

Mercedes-Benz radar distance measurement is turned on at the center console operation panel, which is a button with a triangle and is turned on by default. Taking the 2021 Mercedes-Benz A180 as an example, it belongs to the compact car category, with body dimensions of: length 4419mm, width 1796mm, height 1432mm, and a wheelbase of 2729mm. The 2021 Mercedes-Benz A180 features a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 136PS, a maximum power of 100kW, and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
1
2
Share

What Does Transmission Jerk Mean?

Transmission jerk refers to the impact sensation caused by the inertia of moving parts inside the engine, which can generally be attributed to poor shifting quality or malfunctions. The functions of a transmission are: 1. To change the gear ratio to meet the traction requirements under different driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the vehicle to move in reverse; 3. To interrupt power transmission, such as during engine start-up, idling, gear shifting, or parking, cutting off power to the drive wheels; 4. To engage neutral gear, stopping power output when the clutch is engaged. Methods for maintaining the transmission include: 1. Regularly checking the fluid level; 2. Avoiding skipping gears when upshifting; 3. Not forcing the transmission into neutral; 4. Not shortening the idle warm-up time; 5. Avoiding gear grinding when shifting.
17
0
Share

How to Replace the Battery in a Mercedes-Benz S65 AMG Key?

To replace the battery in a Mercedes-Benz S65 AMG key, follow these steps: 1. Locate the button on the back of the key, press and hold it, then slide the back cover forward to open the key. 2. Remove the old battery from the slot and replace it with a new one. Taking the 2019 Mercedes-Benz S65 AMG as an example, it belongs to the full-size car category with body dimensions of 5309mm in length, 1914mm in width, and 1501mm in height, with a wheelbase of 3165mm and a fuel tank capacity of 80 liters. The 2019 Mercedes-Benz S65 AMG features a double-wishbone independent suspension at the front and rear, and is equipped with a 6.0L twin-turbocharged engine delivering a maximum horsepower of 630PS, a maximum power of 463kW, and a maximum torque of 1000Nm, paired with a 7-speed automatic transmission.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.