Why Are Both the High and Low Pressure Pipes of the Car Air Conditioning Hot?

1 Answers
LaneLynn
07/30/25 6:36am
Car air conditioning low pressure pipe being hot is generally caused by a dirty or clogged expansion valve. Here is the relevant information: 1. Cause of the fault: The low pressure pipe of the car air conditioning is connected to the refrigerant radiator, which exchanges the heat generated by the air conditioning operation. If the expansion valve is blocked, the air conditioning will not work, and the heat generated by the air conditioning operation cannot be removed, leading to the low pressure pipe heating up. It is recommended to go to a repair shop for timely maintenance and resolution. 2. Air conditioning compressor: The air conditioning compressor is usually installed on the engine and driven by a belt (some are directly driven). After being cooled by the condenser heat dissipation pipe, it turns into a high-pressure, low-temperature liquid. Then, after being dehumidified and buffered by the liquid storage dryer, it flows to the expansion valve with relatively stable pressure and flow rate. After throttling and pressure reduction, it finally flows to the evaporator to achieve cooling.
Was this review help?
5
5
Share
More Forum Discussions

What to do if the Haval H1 lacks power?

Regularly perform maintenance according to the official maintenance manual, including changing engine oil, oil filters, cleaning or replacing air filters, and replacing oil filters. Check whether the throttle valve has carbon deposits, whether the intake manifold leaks, and whether related sensors malfunction. Engine overheating can lead to poor lubrication effects, increased mechanical wear, reduced engine power, and higher fuel consumption. Regularly check the levels of engine oil and coolant. Do not mix different types of engine oil or use water as a substitute for coolant.
20
2
Share

Is a Cylinder Pressure of 7 Normal for a Car?

An engine cylinder pressure of 7 is within the normal range. Below is a brief introduction about automobiles: 1. Definition of Automobile: According to China's latest national standard "Terms and Definitions of Motor Vehicles and Trailers" (GB/T-3730.1-2001), an automobile is defined as a non-track vehicle powered by an engine with four or more wheels, primarily used for transporting passengers and/or goods, towing vehicles carrying passengers and/or goods, or for special purposes. 2. Automobile Tariffs: Starting from July 1, 2018, China reduced import tariffs on complete vehicles and auto parts.
10
1
Share

What transmission does the Changan CS95 use?

Changan CS95 uses a 6-speed automatic manual transmission, which represents a transmission that combines 6-speed manual and automatic shifting. Its functions are: 1. It can reduce the impact of manual shifting on the car's drivetrain, extending the car's service life; 2. It improves ride comfort by allowing the selection of appropriate gears based on road conditions. The Changan CS95 is a 5-door, 7-seat mid-to-large SUV with the following dimensions: length 4949mm, width 1930mm, height 1790mm, wheelbase 2810mm, fuel tank capacity 74L, and curb weight 2007kg.
13
5
Share

How to Repair a Dented Front Bumper?

After a car bumper gets dented, it can be repaired using the following two methods: 1. Using hot water: Most front and rear bumpers of family cars are made of special plastic materials, and hot water can help restore the dented part. The principle is that plastic softens when heated, so heating the dented area can pop it back out. Once the dent is restored, immediately cool the area that was heated with prepared cold water to allow the rubber to contract and recover. 2. Using dent repair tools: Although bumpers are highly malleable, sometimes the force from hot water expansion alone is not enough to repair the dent, so dent repair tools are needed in such cases.
5
0
Share

How to lock a Tesla Model 3?

There is a button on the door handle that can be pressed or touched to lock or unlock the door. There is a row of raised ridges on the door handle; touching these ridges will lock the car. Close the door and touch the sensor area on the outside of the door. The turn signals will flash once, indicating the vehicle is locked. The vehicle will remind the owner that it is locked through the parking lights flashing, the horn sounding, and the side mirrors automatically folding. After locking, pull the door handle to confirm if it is locked. You can also check by observing if the side mirrors are folded or by pulling the rear door handle.
2
3
Share

What is the Difference Between High Beam, Low Beam, and Fog Lights?

Fog lights and high/low beam lights differ as follows: 1. Description one: Low beam lights are designed to provide drivers with good illumination, featuring a wide coverage area but short projection distance, with non-adjustable focus. 2. Description two: High beam lights enhance visibility and expand the field of view. On dark roads without streetlights, the visible range with high beams is significantly greater than with low beams alone. 3. Description three: Fog lights serve to make the vehicle visible to others in conditions of reduced visibility due to fog or rain. Therefore, fog light sources must have strong penetration. Most vehicles use halogen fog lights, with LED fog lights being a more advanced option.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.