Why Apply a Car Wrap?

2 Answers
GenesisMarie
07/28/25 9:58pm
The benefits of applying a car wrap are as follows: 1. The paint protection film has excellent durability: The main areas for applying the paint protection film include the front and rear bumpers, the front edge of the engine hood, the front edge of the wheel rims, the outer edges of the side mirrors, the edges of the doors, the inner edges of the door handles, the keyholes, the trunk, and the side door steps. It protects the paint surface from minor scratches and chips. 2. Invisible car wrap: It features strong abrasion resistance, scratch resistance, flexibility, and protection against malicious scratches, providing comprehensive protection for the car paint. Due to its extreme toughness, the car paint film is also vividly referred to as "rhinoceros hide." It safeguards the paint surfaces on various parts of the car body from peeling and scratching, preventing the paint from rusting, aging, and yellowing. A piece of "rhinoceros hide" also has the ability to prevent collisions with small stones and resist UV radiation. Thanks to its outstanding data extensibility, transparency, and surface adaptability, it will never affect the appearance of the car body after application. It is now being used by an increasing number of car manufacturers.
Was this review help?
8
2
Share
VonHaley
08/12/25 2:32am
I work in the city and park on the street every day. I got a car wrap just to protect my car from getting damaged. Acidic rainwater can corrode the paint, and over time, the metal can rust. Sun exposure causes the paint to fade and age, leaving the surface dull and discolored. Bird droppings and leaves left uncleaned can leave stubborn stains. A good car wrap can block rain and UV rays, and thicker materials can prevent scratches. My car has been wrapped for almost a year, and it still looks brand new. I only need to give it a quick wipe every week, saving me time and money on car washes. In the long run, the car won’t age prematurely, and after five or six years, it’ll still hold some resale value—it’s very practical. It’s perfect for busy professionals like me who want to take care of their cars but don’t have much time.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Do You Need to Turn on AC When Using the Car Heater?

You don't need to turn on AC when using the car heater. Here are some car air conditioning usage tips: Turn off A/C during startup and rapid acceleration: Since the air conditioning (non-independent type) consumes some engine power when activated, it's best to turn off the A/C during vehicle startup and rapid acceleration, and then turn it on after the car starts moving. This prevents insufficient engine power during acceleration and startup while also helping save fuel. Control the air vent direction: Based on the principle that cold air sinks and hot air rises, drivers can follow this guideline when adjusting the air vents: point them upward when using the cooler and downward when using the heater. Don't turn on the air conditioning immediately after exposure to sunlight: After a car has been exposed to sunlight, the interior temperature is usually very high. In such cases, drivers should not immediately start the air conditioning. It's best to first open the windows for ventilation and wait for the hot air to dissipate before getting in the car and turning on the air conditioning.
11
4
Share

What Causes the Squeaking Noise When Braking on the Boyue Pro?

There are several reasons for the squeaking noise when braking on the Geely Boyue: Check the shock absorber: Inspect whether there is an issue with the lubrication of the shock absorber's top rubber or buffer rubber. Poor lubrication can cause noise. Incomplete separation of the brake caliper: When the car is cold, the low temperature of the brake fluid can cause incomplete separation of the brake caliper. The solution is to pump the brakes a few times to raise the temperature of the brake fluid, or wait a few minutes after the car has warmed up. New brakes not yet broken in: New brake pads require a break-in period, as they do not achieve optimal friction performance within the first 200 kilometers. This can affect braking efficiency to some extent and may be accompanied by friction noise. The same applies after replacing brake pads. Brake pads have reached their limit: Check if the brake pads have worn down to their limit and need immediate replacement. Additionally, the material of the brake pads can also cause noise.
17
5
Share

What is the reason for no signal from the Audi boost pressure sensor?

Audi boost pressure sensor no signal solution is as follows: Connect the ammeter in series in the circuit: If there is a problem with the pressure sensor, you can connect the ammeter in series in the 24V power circuit to check whether the current is normal. If it is normal, it means the transmitter is normal, and then you should check whether other instruments in the circuit are normal. Check the meter head: If the pressure sensor has a meter head, you need to check whether the meter head is damaged (you can first short-circuit the two wires of the meter head. If it is normal after short-circuiting, it means the meter head is damaged). If the meter head is damaged, you need to replace it with a new one. Check the power supply: Check whether the power supply of the pressure sensor is reversed and whether the positive and negative poles of the power supply are correctly connected. Measure the power supply of the pressure sensor: Check whether there is 24V DC voltage; ensure that the power supply voltage of the pressure sensor is greater than or equal to 12V (i.e., the input voltage of the transmitter power supply is greater than or equal to 12V). If there is no power supply, check whether the circuit is broken or whether the detection instrument is selected incorrectly (the input impedance should be less than or equal to 250 Pa), etc.
17
2
Share

Where is the trailer hook on the Envision?

The trailer hook of this model is located at the rear of the vehicle. When you go to the rear of the car, you will find a small square cover above the rear bumper. Remove this small cover and pull it out by hand, and inside is the trailer hook of the Envision. Introduction to Trailer Hooks: A trailer hook generally refers to a vehicle tow hook, which is typically used for towing. The English name for a vehicle tow hook system is Towbar. It is a towing and traction device for vehicles, consisting of an installation fixed bracket (base anti-collision beam), a spherical tow hook, and a trailer power module. A vehicle tow hook is a spherical towing device. Nowadays, most vehicles abroad are equipped with a tow hook system, and many car brands come with a tow hook from the factory. Vehicle tow hooks have become an essential component of automobiles. Correct Usage of Trailer Hooks: Locate the trailer hook positions at the rear of the towing vehicle and the front of the towed vehicle. Many vehicles have the trailer hook position designed under the bumper, which is usually clearly marked in the vehicle's user manual. Owners can also find a hidden space by inspecting the front and rear bumpers, where a circular or square cover is placed—this is the location of the vehicle's trailer hook. Some vehicles have a split-type trailer hook that requires assembly before use. After removing the cover on the bumper, assemble the hook that comes with the vehicle and install the towing equipment.
3
4
Share

What to Do When the Front Windshield Fogs Up on Rainy Days?

Here's what you can do when the front windshield fogs up on rainy days: Turn on the heater directly: Increase the fan speed slightly, and the dry, warm air will evaporate the water molecules in the car's interior air, preventing fogging on the windshield. However, this method has a drawback: when frost starts forming on the windshield and the heater is turned on, the water temperature rises. Since water molecules cannot be removed in time, the fog on the glass often increases when the heater is activated. But don't worry—once the overall temperature rises, no fog will form. If it's not raining heavily, you can simply open the windows for a few seconds to clear the fog: The principle is that lowering the interior temperature makes it harder for moisture to condense. Generally, this method works better in winter because the air is drier, and opening the windows can help remove moisture from the car. However, on rainy days when the outside air is more humid, it takes longer to achieve the same effect. You can also turn on the car's defroster directly: This is the simplest way to remove fog. The principle involves blowing dry, cold air from the car's interior onto the front windshield, equalizing the temperature inside and outside the glass and creating a dry air barrier. This prevents condensation of humid air inside the car and stops fog from forming.
10
1
Share

How many seconds does the Sylphy take to accelerate from 0 to 100 km/h?

According to official data, the Sylphy comes in two engine displacements: 1.2L and 1.6L. The 1.2L Sylphy takes 11.4 seconds to accelerate from 0 to 100 km/h, while the 1.6L model takes 11.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is applied to propel the vehicle, resulting in faster acceleration. The 1.2L Sylphy has a torque of 159 Nm and accelerates from 0 to 100 km/h in 11.4 seconds, while the 1.6L model has a torque of 155 Nm. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 1.2L Sylphy is equipped with a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The 1.2L Sylphy has a power-to-weight ratio of 108 Hp/T and accelerates from 0 to 100 km/h in 11.4 seconds, while the 1.6L model has a ratio of 131 Hp/T and takes 11.8 seconds.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.