Whose technology is the Lynk & Co 03 engine?

What are the hazards of parking with wheels not straightened?

The hazards of parking with wheels not straightened: 1. Accelerated aging of the steering tie rod. The tie rod remains under force for a long time and cannot return to its original position, leading to accelerated aging over time; 2. Accelerated aging of the power steering pump. When the hydraulic power steering system's pump pushes oil for steering but lacks a return oil action, it causes negative pressure in the pump, which over time accelerates its aging; 3. The suspension will tilt towards the direction the wheels are not straightened, causing accelerated wear on the soft-support rubber pads and bushings; 4. Increased force on the tire sidewalls leads to accelerated wear, which over time can result in dangerous situations like tire blowouts.

3

4

Share

What does an exclamation mark inside a Skoda bulb mean?

An exclamation mark inside a Skoda bulb is the bulb failure warning light, indicating that one of the car's bulbs is damaged. At this time, you should check which bulb is damaged and then replace the faulty bulb. The lights on a car include headlights, brake lights, turn signals, width indicators, fog lights, etc., and these lights are crucial for the car's driving safety. If the sealing of the lights is poor, moisture or water vapor can enter the light, which can easily burn out the filament. Therefore, it is important to protect the lights when using the car. Skoda is one of the classic brands of Volkswagen Group, founded in 1895 and headquartered in Mladá Boleslav, Czech Republic. It is one of the world's oldest car manufacturers.

6

1

Share

How to remove the wrench icon on Maxus G10?

Steps to remove the wrench icon on Maxus G10: 1. Switch the display to show remaining maintenance mileage; 2. Locate the round button at the top end of the turn signal lever; 3. Press this button 5 times consecutively within 3 seconds to clear the wrench indicator. The Maxus G10 is an MPV model under the Maxus brand, with a wheelbase of 3198mm and dimensions of 5168mm (length) × 1980mm (width) × 1928mm (height). In terms of power, the G10 offers two engine options: a 1.9L turbocharged diesel engine delivering 150 horsepower and 350Nm of maximum torque, and a 2.0L turbocharged gasoline engine producing 218 horsepower and 350Nm of maximum torque.

12

0

Share

Is the Volkswagen Phideon an Imported or Joint Venture Vehicle?

Volkswagen Phideon is a joint venture vehicle, a mid-to-large luxury sedan under SAIC Volkswagen. In terms of powertrain, the Phideon is equipped with two engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter supercharged engine. The 2.0-liter turbocharged engine delivers a maximum power of 165 kW and a maximum torque of 350 Nm, while the 3.0-liter supercharged engine produces a maximum power of 220 kW and a maximum torque of 440 Nm. Regarding body dimensions, the Phideon measures 5074 mm in length, 1893 mm in width, and 1489 mm in height, with a wheelbase of 3009 mm. It features a five-link independent front suspension and a trapezoidal-link independent rear suspension.

8

3

Share

What Causes the Tachometer Not to Return to Zero?

The reasons why the tachometer does not return to zero: 1. The speedometer in the vehicle's instrument cluster malfunctions, causing the tachometer needle to stop moving; 2. The vehicle's mileage sensor fails. Check if the flexible shaft connection is disconnected, then observe whether the mileage starts to increase. If only the tachometer stops working, a new one must be replaced; 3. Foreign objects inside the instrument panel are stuck and cannot move. Open the instrument panel to remove the foreign objects. The tachometer is usually located within the instrument panel, symmetrically placed alongside the speedometer. The tachometer operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted, and converting this signal into a displayable speed value. The faster the engine speed, the more pulses the ignition coil generates, resulting in a higher displayed speed value on the gauge.

10

2

Share

What causes the car to feel jerky?

The reason the car feels jerky is due to piston slap, which is an abnormal noise caused by the piston side hitting the cylinder wall. When the direction of the axial force on the piston top changes as the piston moves from the compression stroke to the power stroke, piston slap occurs. Each time the piston passes top dead center and moves downward, it is forced to hit the cylinder wall, leading to piston slap. The determining factor for piston slap is the clearance between the piston and the cylinder wall, commonly referred to as piston clearance. The effect of piston clearance on slap: when the engine is cold, the piston clearance is larger, resulting in louder knocking sounds. However, as the engine temperature rises, the piston clearance decreases accordingly, and the knocking sound diminishes. If piston slap occurs, it is advisable to promptly visit a repair shop for inspection and repair.

17

3

Share

Whose technology is the Lynk & Co 03 engine?

What are the hazards of parking with wheels not straightened?

What does an exclamation mark inside a Skoda bulb mean?

How to remove the wrench icon on Maxus G10?

Is the Volkswagen Phideon an Imported or Joint Venture Vehicle?

What Causes the Tachometer Not to Return to Zero?

What causes the car to feel jerky?

What is the purpose of a crash cushion truck?

How to Call a Tow Truck?

What is the difference between beam wipers and conventional wipers?

Can a temporary ID card be used for the Subject 4 driving test?