Who Pays the Subject 2 Retake Fee - Yourself or the Driving School?

1 Answers
LaMaximus
07/29/25 7:44pm
Whether the Subject 2 retake fee is paid by the driving school or yourself depends on the specific situation. Generally, candidates are required to pay the retake fee online themselves, but some driving schools may ask students to submit the fee to their instructors or the school for unified payment. Below are important notes for the Subject 2 test: 1. Fasten seat belt: Buckle up immediately after entering the vehicle. Ensure the belt isn't clipped backward or fastened to the passenger seat, as this will result in automatic disqualification. Never unfasten the belt during the entire test. 2. Adjust seating: Properly adjust the seat and mirrors, fasten seat belt, activate left turn signal, engage first gear, and release handbrake. These six steps are mandatory. Complete all preparations before moving. 3. No stopping during maneuvers: While there's no time limit for reverse parking, the vehicle must not stop during the process. If wheels remain stationary for 3 seconds, the system will record it as mid-process stopping. Therefore, maintaining proper speed control is crucial. 4. 30-second limit for hill starts: The hill start must be completed within 30 seconds, with system reminders every 10 seconds. Exceeding this timeframe results in automatic failure.
Was this review help?
18
4
Share
More Forum Discussions

What are the tips for repairing high-pressure fuel pipe joint leaks?

Tips for solving high-pressure fuel pipe joint leaks mainly include proper installation, reducing resonance, and reasonable adjustment. The details are as follows: Proper installation: In addition to paying attention to the quality of the high-pressure fuel pipe, it should be correctly assembled. The pipe clamp should be installed in the correct position, and missing installation must be avoided. Reducing resonance: The span of the high-pressure fuel pipe is large, and the opening and closing of the fuel injector needle valve during diesel engine operation can cause strong high-frequency vibrations in the high-pressure fuel pipe, which is one of the main reasons for its damage. To address this, a clamp can be used to fix the middle part of the high-pressure fuel pipe to adjacent bolts or other fixed components to reduce resonance. Reasonable adjustment: Ensure the injection pressure of the fuel injector complies with the specifications in the manual to prevent pipe rupture due to excessive injection pressure. When adjusting the fuel injection timing angle, avoid forcibly pulling or pushing the high-pressure fuel pipe.
4
1
Share

How to Deal with Foggy Windows on a BYD?

Generally, car windows fog up due to a significant temperature difference between the inside and outside. In this case, you can turn on the cold air inside the car and direct it towards the windshield. After starting the car, adjust the air conditioning to the warm air setting and direct it towards the windows. However, this method takes a long time to ensure the temperature difference between the inside and outside is balanced. You can purchase some anti-fog agents for car windows online, apply them to a towel, and then wipe the glass around the windows to prevent fogging. This method is low-cost but troublesome. Alternatively, you can use soapy water with a towel to wipe the inside and outside of the windows. The last method is relatively economical. You can buy some glass cleaner, apply it to a towel, and then use it to wipe the car windows.
6
2
Share

Why Is It Difficult to Engage Reverse Gear?

Difficulty in engaging reverse gear is usually related to the driver or the vehicle. Below are detailed explanations for why reverse gear may be hard to engage: 1. Clutch Not Fully Depressed: If the clutch is not fully depressed when shifting into reverse, it can result in difficulty engaging the gear and a lack of smooth engagement. 2. Role of the Synchronizer: Some drivers shift gears quickly, immediately pushing the gear lever after depressing the clutch. At this point, the gears are not synchronized—one is fast, the other slow—and the synchronizer hasn't fully adjusted the two sets of gears to the same speed, leading to a feeling of incomplete engagement. 3. Insufficient Force When Shifting: If the driver lacks strength or applies insufficient force, it can cause difficulty in engaging the gear. In such cases, applying more force to the gear lever should resolve the issue.
7
4
Share

What are the reasons for low coolant temperature?

The reasons for low coolant temperature are: 1. Faulty water temperature gauge and wiring; 2. Damaged water temperature sensor; 3. Thermostat valve stuck open; 4. Louvers unable to close; 5. Faulty temperature control switch or fan motor wiring; 6. Malfunctioning silicone oil clutch in vehicles equipped with silicone oil clutch fans. The functions of coolant are: 1. To prevent freezing and expansion of coolant in cold seasons, which could crack the radiator and damage the engine cylinder block; 2. To prevent corrosion of metal parts and aging of rubber components; 3. To reduce scale formation, avoiding blockage of circulation pipes and affecting the cooling system's heat dissipation function; 4. To prevent the engine from overheating, ensuring it operates at the proper working temperature; 5. To provide lubrication for the water pump, thermostat, and other components.
5
5
Share

Why is a urea-fueled vehicle emitting black smoke?

Incomplete combustion of fuel injected into the cylinder. When there is insufficient air intake in the cylinder, it can easily lead to high temperature and oxygen deficiency in the combustion chamber. The unburned carbon molecules in the fuel aggregate to form free particles, which are suspended in the combustion gas and expelled with the exhaust, resulting in black smoke. Additionally, thick blue smoke may appear from the exhaust pipe when the vehicle starts, indicating oil burning. Here are the details: 1. Oil burning phenomenon: Oil burning refers to engine oil entering the engine and burning together with the fuel mixture, which can cause rapid damage to the vehicle's oxygen sensor, increase carbon deposits in the combustion chamber, raise fuel consumption, and in severe cases, lead to irreparable engine damage. 2. Detection method: To detect oil burning, fill the vehicle with engine oil, drive 1000 kilometers, and then weigh the oil filter. Repeat this process several times. If the oil consumption exceeds 0.3 liters per 1000 kilometers, it indicates an oil burning phenomenon.
4
0
Share

What is the minimum ground clearance of the Lavida when fully loaded?

The minimum ground clearance of the Lavida when fully loaded is 110mm. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting plane when the vehicle is fully loaded or stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. Taking the 2019 Lavida as an example, it belongs to the compact car category, with body dimensions of: length 4613mm, width 1765mm, height 1460mm, a wheelbase of 2610mm, and a curb weight of 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 145 Nm, paired with a 5-speed manual transmission.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.