Who Pays for the Round-Trip Transportation Costs When the Other Party Is Fully at Fault for My Car Repair?

2 Answers
VonAlina
07/29/25 9:49pm
The insurance company may cover the compensation within the insurance limit, and any amount exceeding the insurance limit shall be borne by the infringing party. Below are the relevant details: 1. Article 17: If a victim suffers personal injury, the liable party shall compensate for various expenses incurred during medical treatment and the loss of income due to missed work, including medical fees, lost wages, nursing fees, transportation costs, accommodation expenses, hospital meal subsidies, and necessary nutritional expenses. 2. Compensation Obligations: In the event of the victim's death, in addition to compensating for the relevant expenses specified in the first paragraph of this article based on the rescue and treatment situation, the liable party shall also compensate for funeral expenses, living expenses of dependents, death compensation, and other reasonable expenses such as transportation, accommodation, and lost wages incurred by the victim's relatives for funeral arrangements.
Was this review help?
18
3
Share
VonCassandra
08/15/25 9:22pm
I've been through several minor accidents, and when the other party is fully at fault, the round-trip transportation costs for car repairs are definitely covered by the at-fault party or their insurance company. The specific approach is quite simple: keep all receipts for transportation expenses, such as taxi fares to the repair shop or bus tickets. During the repair period, you may need to make multiple trips, and these small expenses can add up to significant savings. After filing a claim with the other party's insurance company, they will guide you on how to submit the necessary documentation for reimbursement. Once, my car was in the shop for two days, and I spent over 300 yuan on taxis, which the insurance company later fully reimbursed. I recommend handling this promptly to avoid losing evidence. Additionally, lost wages or other direct losses can also be claimed, but the focus here is on transportation costs. Remember, legally, this is a basic right, so don't worry too much—proactive communication is key.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

What size memory card is generally used for a dash cam?

Generally, a 64GB memory card is used for a dash cam. The required memory capacity depends on the duration of each drive, the maximum memory capacity supported by the dash cam, and the resolution of the recorded video. Longer driving times require larger memory, and similarly, higher resolution videos occupy more memory space. A dash cam is an instrument that records images, sounds, and related information during vehicle travel. After installation, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents. It can also serve as a parking monitor. The video footage from a dash cam should not be edited, as tampering with the data may render it useless in proving liability during accidents. This also helps prevent unavoidable fraudulent claims prevalent in society today. Different dash cam models may vary in appearance, but they generally consist of essential components: a main unit, a speed sensor, data analysis software, and an infrared camera, which is crucial for night vision functionality.
14
4
Share

How tall is the Volkswagen Tharu?

The height of the Volkswagen Tharu is: 1632mm. The Volkswagen Tharu's length, width, and height are 4453/1841/1632mm respectively, with a wheelbase of 2680mm. In terms of power: it is equipped with a 2.0T engine and a 1.4T engine. 2.0T model: The Tharu 2.0TSI model adopts a new powertrain. The 2.0T model is equipped with a DQ381 seven-speed wet dual-clutch transmission, capable of withstanding up to 420 Nm of torque. The 2.0T engine model is EA888-GEN3, with a maximum power of 137 kW at 4100-6000 rpm and a maximum torque of 320 Nm. 1.4T model: The 1.4T model uses a DQ200 seven-speed dry dual-clutch transmission. It is matched with the DQ200 seven-speed dry dual-clutch transmission, and the engine model is EA211.
8
4
Share

Why won't the Odyssey start?

The reasons why the Odyssey won't start include: use of inferior fuel; battery depletion; starter relay sticking, etc. Use of inferior engine oil: During cold starts, factors such as cylinder pressure, RPM, and temperature make it difficult for inferior oil to ignite, preventing startup. It is recommended to use the manufacturer-recommended oil or a higher-quality full synthetic oil. Battery depletion: When the voltage during startup is lower than the minimum operating voltage of the computer, the engine computer does not function, preventing startup. In this case, the battery should be charged or replaced. Starter relay sticking: During startup, there is only a slight "click" sound with no further response, which is caused by the starter relay sticking. In this situation, simply pressing the tail of the solenoid to force it forward can connect the starter circuit, allowing the engine to start.
4
1
Share

How Many Liters of Brake Fluid Are Needed for a Single Replacement?

Generally, only 1L of brake fluid is needed for a car's brake fluid replacement. During replacement, it is essential to use brake fluid of the same grade as the original. The brake fluid grade is indicated on the brake fluid cap. For example, if the original fluid is DOT4, only DOT4 should be used. Additionally, attention should be paid to the replacement interval, which varies depending on different climatic conditions. Relevant information about automotive brake fluid is as follows: 1. Automotive brake fluid is the liquid used in hydraulic brake systems. It must be chemically inert, unaffected by high temperatures, and should not cause corrosion, softening, or swelling to metals and rubber. Commonly used types include DOT3, DOT4, and DOT5. 2. Do not mix different types or brands of brake fluid. For brake systems with special requirements, a specific brand of brake fluid should be used. Since different brands and types of brake fluid have different formulations, mixing them can lead to a decline in the performance indicators of the brake fluid.
9
5
Share

What does L4L stand for?

L4L refers to the Low-speed Four-wheel Drive mode in vehicles. Below are detailed introductions to the four-wheel drive system modes: 1. H4F Full-time Four-wheel Drive. H4F is the default four-wheel drive mode for the Prado, used during everyday urban driving. 2. H4L High-speed Four-wheel Drive. In this mode, both the front and rear differentials are locked, ensuring all four wheels rotate at the same speed. This prevents scenarios where a lifted wheel spins rapidly while a stuck wheel remains stationary. When driving in H4L mode, it's advisable not to exceed 80km/h. 3. L4L Low-speed Four-wheel Drive. This mode is typically used in slippery conditions such as mud or swamps. Low-speed four-wheel drive reduces speed through a gear mechanism to increase torque. The Prado's low-speed four-wheel drive can amplify the torque from high-speed four-wheel drive by 2.6 times, providing greater power to escape difficult situations, albeit at a slower speed.
1
2
Share

What is the capacity of a single-sided dual-layer DVD disc?

The capacity of a single-sided dual-layer DVD disc can reach 8.5GB. A DVD disc consists of two substrates, with each substrate capable of holding up to two layers of data. A disc (disk) is the medium that carries data storage in a hard drive. Hard drive discs are made of durable materials as the base, with magnetic powder attached to the surface of an aluminum alloy (new materials may also use glass) disc, which is processed to be very smooth. These magnetic powders are divided into several concentric circles called tracks, and on each concentric track, there are countless randomly arranged tiny magnets representing the states of 0 and 1. When these tiny magnets are influenced by the magnetic force from the head, their alignment direction changes accordingly. By using the magnetic force of the head to control the direction of specific tiny magnets, each tiny magnet can be used to store information. A hard drive is composed of multiple discs stacked together, separated by spacers. Most modern disk discs use thin-film composite technology. The structure of a hard drive's medium film is roughly as follows: lubrication layer, carbon coating, magnetic layer, buffer layer or underlayer, and substrate.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.