Who owns WM Motor electric vehicles?

Is the Electronic Parking Brake Automatically Released?

Is the electronic parking brake automatically released? The usage method of the electronic parking brake is: 1. Activate the electronic parking brake by stepping on the brake pedal and pulling up the electronic parking brake switch until the indicator light on the dashboard lights up, and the indicator light on the parking brake switch also lights up; 2. Deactivate the electronic parking brake by pressing the electronic parking brake switch while stepping on the brake, and the indicator lights on the dashboard and switch will turn off. The principle of the electronic parking brake is: when parking, after the driver operates the electronic button of the electronic parking brake system, the electronic control unit will control the motors integrated in the left and right brake calipers to act, driving the brake caliper pistons to move and generate mechanical clamping force to complete the parking.

10

1

Share

What are the reasons for the Audi A6 displaying a vehicle starting system malfunction?

Audi A6 displaying a vehicle starting system malfunction is due to: 1. If a warning light appears on the dashboard, a green light indicates that the vehicle's current position is too low, while a yellow light indicates a fault in the air suspension system; 2. The starting switch time is too short. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and a fuel tank capacity of 73l. The 2020 Audi A6 features a front suspension with a five-link independent suspension, and a rear suspension also with a five-link independent suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, a maximum torque of 320nm, and is paired with a 7-speed dual-clutch transmission.

13

4

Share

At What Moisture Content Should Brake Fluid Be Replaced?

Brake fluid must be replaced when its moisture content exceeds 2.5%. Testing Standards: Generally, moisture content is measured using a brake fluid tester, which works by detecting the conductivity of the brake fluid. The results are displayed via built-in light-emitting diodes (indicators) in the testing device. The standard is as follows: if the moisture content is below 0.5%, the brake fluid is in good condition; if it is between 0.5% and 2.5%, replacement is optional; if it exceeds 2.5%, the brake fluid must be replaced. Precautions for Brake Fluid Replacement: During the replacement process, if air enters the brake lines, the brakes may feel softer after replacement, potentially leading to delayed braking or even brake failure. To avoid this, the brake fluid can be replaced using a thorough bleeding method. Open the bleeder valve of the brake caliper, start the engine, and repeatedly press the brake pedal. Once no more fluid comes out of the bleeder valve, tighten it. Refill the master cylinder with new fluid and repeatedly press the brake pedal until it feels firm. Then, loosen the bleeder valve to release fluid, and quickly tighten it when the pedal drops. Repeat this process twice until no air bubbles emerge from the fluid. Always check the fluid level in the master cylinder to ensure it does not drop below the minimum mark.

6

0

Share

How to Remove Adhesive After Tearing Off Car Window Film?

Window glass film after tearing off the adhesive removal method is: 1. Use a cotton swab to apply vinegar on the residual adhesive. After the vinegar and adhesive blend, wipe it clean with a cloth; 2. Apply essential balm on the adhesive and scrape it with a knife; 3. Evenly apply alcohol on the residual film adhesive. After the adhesive is eroded and softened by alcohol, wipe it off; 4. Spray a special heat-insulating cleaning agent on the residual film adhesive. It will melt in a short time, then wipe it clean with a cloth. The functions of car window film are: 1. Heat insulation: blocks part of the heat, reduces air conditioning energy consumption, achieving energy-saving effects; 2. UV protection: effectively blocks ultraviolet rays, protecting the dashboard from radiation and extending its service life; 3. Anti-explosion function: when the front windshield is shattered by external force, the fragments will not splatter, protecting the driver's safety; 4. Anti-glare: significantly reduces dazzling light.

4

0

Share

What is the correct way to buckle a seat belt?

The correct way to buckle a seat belt is: 1. Adjust the height of the seat belt; 2. Ensure the belt crosses the center of the shoulder to prevent it from being too high and cutting into the neck or too low and slipping off; 3. Keep the lap belt tight to prevent the body from sliding out or causing injury to the waist. The function of the seat belt is: in the event of a collision or when emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack in the belt and securing the occupant firmly in the seat to prevent secondary collisions. Once the tension of the seat belt exceeds a certain limit, the force limiter will appropriately loosen the belt to maintain stable pressure on the chest.

20

5

Share

What is the purpose of a crown gear?

The purpose of a crown gear is: used in mechanical transmissions, reversing clutches, and also widely applied in toys. It is named for its crown-like shape. The characteristics of crown gears are: compact size, tight structure, and high torque transmission. With slight design modifications to the axial positioning part, it can slip when overloaded, providing self-protection. Similar to bevel gear transmission, crown gears are mainly used for motion and power transmission between two intersecting vertical shafts, enabling speed variation. Gear mechanisms are widely used in LEGO components as one of its main transmission mechanisms due to their features such as accurate transmission, smooth operation, high power transmission, reliable speed variation, and broad transmission range.

14

2

Share

Who owns WM Motor electric vehicles?

Is the Electronic Parking Brake Automatically Released?

What are the reasons for the Audi A6 displaying a vehicle starting system malfunction?

At What Moisture Content Should Brake Fluid Be Replaced?

How to Remove Adhesive After Tearing Off Car Window Film?

What is the correct way to buckle a seat belt?

What is the purpose of a crown gear?

What brand is Jetour?

How long is the Sagitar car in meters?

What are the reasons for water leakage in a car's trunk?

How Much Transmission Fluid Does a Car Need?