Which Year's Trucks Comply with China V Emission Standards?

1 Answers
Theodore
07/30/25 1:50am
China V emission standard-compliant trucks were generally introduced to the market around 2016, with the standard officially implemented starting July 2017. Below is a detailed introduction to China V: 1. Emission Standards: The China V emission standard specifically refers to light gasoline and diesel vehicles complying with 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (China V)', and heavy diesel vehicles meeting the fifth-stage emission control requirements in 'Limits and Measurement Methods for Emissions from Compression Ignition and Gas Fuel Positive Ignition Engines and Vehicles (China III, IV, V)'. This standard was implemented nationwide from January 1, 2017. 2. Significant Implications: The implementation of the China V emission standard marks another major step towards green development in Zhejiang, holding great significance from an environmental protection perspective. For the automotive industry as a whole, consumers, manufacturers, and dealers alike will face a new adaptation process. Enforcing the China V standard means that within Zhejiang Province, imported, sold, registered, or transferred light gasoline vehicles, light diesel passenger vehicles, and heavy diesel vehicles (limited to public transport, sanitation, and postal services) must meet China V requirements. Vehicles meeting China IV or lower standards cannot be transferred or sold to provinces or cities that have already implemented China V. 3. Primary Targets: Relevant officials from the Provincial Environmental Protection Department stated that the new standard primarily targets the registration of new vehicles within the province and the transfer of vehicles from other provinces into Zhejiang. Vehicles already in use within the province before the new standard's implementation will follow previous policies, unaffected by the new standard. Additionally, as the new policy does not specify regulations, the transfer of used vehicles within the province will continue under the original policy.
Was this review help?
7
1
Share
More Forum Discussions

Which vehicle shares the same engine as the Toyota Tundra?

Toyota Tundra shares the same engine as the Land Cruiser, both equipped with a V8 naturally aspirated engine. Here are the detailed specifications: 1. The engine in the Tundra is coded as 3UR-FE, a V8 naturally aspirated engine. 2. This engine delivers a maximum power of 284 kW and a maximum torque of 544 Nm, with peak power achieved at 5,600 rpm and peak torque at 3,600 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with a 6-speed automatic transmission. 3. The Tundra's front suspension employs a double-wishbone independent setup, while the rear suspension uses a leaf spring non-independent configuration. 4. The vehicle is equipped with a part-time four-wheel-drive system, typically offering three modes: high-range 4WD, low-range 4WD, and high-range 2WD. Engaging low-range 4WD mode amplifies wheel torque, enhancing the vehicle's off-road capability. 5. The Tundra is an imported large-displacement pickup truck with substantial engine torque, which significantly boosts its towing capacity. It also boasts strong off-road performance, making it an excellent choice for those with off-roading needs.
1
1
Share

What are the dimensions of the Maxus V90 medium wheelbase medium roof?

The interior dimensions of the Maxus V90 medium wheelbase medium roof are a height of 1708mm and a width of 1800mm. Below are the detailed specifications of the Maxus V90: 1. Powertrain: The Maxus V90 is equipped with the all-new 2.0T high-performance diesel engine "SAIC π", delivering a maximum power of 160kW/4000rpm and a peak torque of 480Nm/1500-2400rpm. It offers three transmission options, paired with either a 6AT, 6MAT, or 6MT gearbox. 2. Interior: Features include a multifunction steering wheel, panoramic side windows, and flush sliding windows for enhanced comfort. Optional upgrades include a 10.1-inch HD touchscreen display and a 4.2-inch LCD instrument cluster. The vehicle is equipped with the Bosch ESP9.3 system, a new high-performance quad-core processor, and the ADAS intelligent driving assistance system.
19
0
Share

How to Adjust the Driver's Seat to the Optimal Position?

Adjusting the seat to the optimal position depends on the driver's body size. The height of the car seat should vary according to the driver's physique. The seat height should not obstruct the driver's view or interfere with driving. Generally, the driver's line of sight should be at the middle-upper position of the front window. Specific instructions are as follows: 1. Seat forward/backward distance: Adjust the distance between the seat and the steering wheel to a suitable value, with the knees slightly bent, allowing easy and comfortable operation of the accelerator and brake pedals. 2. Seat height: Adjust the seat height so that the driver's eyes are level with the middle-upper position of the front windshield, not too low to prevent the steering wheel and dashboard from blocking the view. 3. Seat headrest: The head should be as close as possible to the headrest, with the contact point slightly above the driver's eye level. 4. Seat lumbar support position: The lumbar support should not be too high or too low; adjust it to a position that is comfortable for the driver.
19
1
Share

What Causes a Lean System in Cylinder Bank 1 at Idle in Audi Vehicles?

A lean system in cylinder bank 1 at idle in Audi vehicles is generally caused by the following reasons: clogged fuel injectors; excessive air intake; exhaust pipe leaks; or aged, softened, cracked, or leaking crankcase ventilation valve diaphragms in the oil-gas separator. A lean system in cylinder bank 1 at idle indicates an overly lean air-fuel mixture in one engine bank, requiring inspection of the following aspects: 1. Fuel injector atomization performance. 2. The electronic control system. 3. Potential failures in the engine's intake pressure sensor. 4. Air intake pipe leaks. A lean system in cylinder bank 1 at idle can lead to the following issues: 1. Poor engine performance during idle, acceleration, or full-load conditions, resulting in reduced engine power. 2. Increased fuel consumption. 3. Higher emission pollution levels. 4. In severe cases, it may even prevent the engine from operating.
13
3
Share

Do Private Cars Come with Safety Hammers?

Private cars are not equipped with safety hammers. The details are as follows: 1. Benefits of equipping a safety hammer: Unlike public vehicles, private cars are primarily driven by individuals. The biggest advantage of equipping a safety hammer in a private car is that in emergencies, if the doors and windows cannot be opened normally, the hammer can help those trapped inside to break the glass promptly for escape. 2. Function of the safety hammer: Private cars should be equipped with safety hammers as they serve as crucial escape tools in emergencies. By striking the four corners of the window glass with the pointed end of the safety hammer, cracks will appear immediately, and then a kick can dislodge the entire piece of glass. If a safety hammer is not available, hard objects such as high heels or keys can be used to break the car glass for escape. 3. Choosing a safety hammer: Safety hammers, much like fire extinguishers in cars in the past, serve a preventive role. If purchasing a safety hammer, it is advisable to opt for slightly more professional ones. Those multi-functional safety hammers may look fancy but are not practical; in fact, a regular hammer is more practical.
8
2
Share

How to Obtain Temporary License Plates for a New Car?

New car temporary license plates can be processed by the 4S dealership or by the owner themselves. If processed by the 4S dealership, the owner needs to provide their ID card, the fourth copy of the car purchase invoice, the original and a copy of the vehicle qualification certificate, the original and a copy of the third copy of compulsory traffic insurance, etc. If processing it yourself, the specific steps are as follows. 1. Take the required materials to the local vehicle management office window to apply for temporary license plates. 2. Go to the finance department to pay a processing fee of 10 yuan. 3. Take the receipt to the temporary license plate processing window to queue up for collection, which usually takes about ten minutes. Notes regarding temporary license plates: 1. Temporary license plates are paper-based and cost 5 yuan each. 2. Two temporary plates are required, one to be placed on the front windshield and the other on the rear windshield. 3. Temporary license plates are valid for 15-30 days, and each vehicle can be issued a maximum of three times. 4. Violations committed while using temporary license plates will result in a 12-point deduction.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.