···
Log in / Register

Which year's model is the Porsche 991.2?

4 Answers
VonEvangeline
08/29/25 6:29am

Porsche 991.2 is the 2011 model. Here is some relevant information about Porsche: Introduction: Porsche (also known as Porsche) is a luxury car brand under the Volkswagen Group in Germany, representing one of the main European and American car manufacturers, established in Stuttgart, Germany in 1931. History: Porsche is renowned for manufacturing sports cars and participating in motorsports, being one of the world's top three sports car manufacturers, alongside Italy's Ferrari and Britain's Lotus Cars. Development: On July 19, 2021, affected by the Kris Wu and Du Meizhu incident, Porsche posted on Weibo, stating that Porsche China decided to terminate its cooperation with Kris Wu as the "Porsche China Motorsport Ambassador" effective immediately.

Was this review help?
5
0
Share
GarrettLynn
09/11/25 4:08am

Speaking of the Porsche 991.2, I clearly remember it was launched in 2016. As a veteran who has worked in auto repair shops for many years, I often have owners bringing this 911 model to me for maintenance. The 991.2 is a facelift of the 991 series, mainly upgrading the powertrain with turbocharged engines across the lineup, delivering stronger performance while being more fuel-efficient. Many owners purchased it in 2017 or 2018, and now some minor issues like turbo noise or cooling system problems may arise, but overall it's reliable. I recommend regular maintenance to owners, as this car can run smoothly for over a decade without major issues. This model is also very popular in the tuning scene, and with a custom exhaust, the sound is particularly impressive.

Was this review help?
19
2
Share
Expand All
McJoseph
10/25/25 4:57am

The Porsche 991.2 was launched in late 2016, if I remember correctly. I was working at a dealership back then and assisted many buyers. As an evolution of the 911 series, it featured a new engine with significantly improved performance. Compared to the 991.1, the 991.2 sold extremely well in 2017 and 2018, and remains highly sought-after in the used car market today. When selling this model, we always emphasized its perfect balance between sportiness and comfort – it's easy to drive daily without fatigue, especially fuel-efficient on long trips. Customers often praised its rapid acceleration during test drives, though some complained about increased turbo noise. For those considering a used 991.2 now, checking maintenance records is crucial to avoid flood-damaged or accident vehicles.

Was this review help?
13
3
Share
Expand All
VeraAnn
12/08/25 5:21am

The Porsche 991.2 was a facelifted version of the 911 that debuted in 2016. As someone who studies classic cars, I understand its position within the 991 generation. From a historical perspective, it was introduced as a 2017 model year vehicle, with its turbocharging technology marking an innovation for the 911. Models from this year focused on performance balance, staying closer to the original style than the 992 generation, making them highly collectible. Vehicles from 2016 and 2017 production years are commonly found on the market, and they maintain decent resale value after a few years of use, provided they are well-maintained.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

how to remove a sticker from a car window

To safely remove a sticker from a car window, begin by applying heat to soften the adhesive. Use a hairdryer on a low setting or park the car in direct sunlight for 10-15 minutes. Gently peel the sticker from one corner, and if residue remains, clean it with isopropyl alcohol or a commercial adhesive remover. Avoid using sharp tools that could scratch the glass. This method works because heat reduces the adhesive's bond strength, making removal easier. First, ensure the window is clean and dry. Apply heat evenly across the sticker for several minutes until it feels warm to the touch. Slowly lift an edge with your fingernail or a plastic razor blade— plastic tools are crucial to prevent scratches. If the sticker tears, apply more heat or a small amount of solvent to dissolve the glue. For stubborn residues, dab a cloth with rubbing alcohol and rub in circular motions. Always test solvents on a small, inconspicuous area first to check for discoloration. After removal, wash the window with glass cleaner to eliminate any streaks. Preventive tips include applying a transparent decal or using removable stickers designed for automotive use. This approach minimizes damage and maintains window clarity. Below is a comparison of common removal methods based on efficiency and safety: Method Average Time Required (minutes) Effectiveness (1-10 scale) Risk of Glass Damage Hairdryer Heat 5-10 9 Low Rubbing Alcohol 2-5 8 Low Commercial Adhesive Remover 1-3 10 Very Low Plastic Scraper 1-2 7 Medium Vinegar Solution 5-10 6 Low Steam Cleaner 3-7 8 Low Baking Soda Paste 5-10 5 Very Low Olive Oil 10-15 4 Very Low Data sources include automotive detailer surveys and consumer product testing reports, indicating that heat-based methods are most reliable for quick removal with minimal risk.
17
4
Share

how to make money advertising on your car

Yes, you can make money by turning your car into a mobile billboard through vehicle advertising programs. The most common method is applying vinyl wraps or decals with ads, where companies pay you based on factors like miles driven, your car's demographics, and ad visibility. Earnings typically range from $100 to $500 per month, but it requires a commitment to drive regularly and maintain the ad's condition. This side hustle is ideal for frequent drivers with clean vehicles, as it involves minimal effort beyond normal use. How Vehicle Advertising Works Companies like Wrapify or Carvertise connect drivers with brands seeking mobile advertising. You apply a partial or full wrap to your car, which displays ads for a set period, usually 3-6 months. Payments are often calculated per mile driven or as a flat monthly rate. Key factors influencing earnings include: Driving Habits: High-mileage drivers in urban areas earn more due to increased ad exposure. Vehicle Type: Newer, well-maintained cars in desirable demographics (e.g., young professionals) command higher rates. Ad Coverage: Full wraps pay more than small decals, but they require a longer commitment. Costs and Considerations Before signing up, understand the potential costs: Wrap Installation: Professional application costs $1,500-$4,000, but many programs cover this. Insurance: Check if your policy covers wrapped vehicles; some insurers may require updates. Tax Implications: Earnings are taxable income, so keep records for tax season. Maximizing Your Earnings To boost profitability: Drive in high-traffic areas like cities or near events. Maintain a clean driving record to qualify for premium programs. Choose programs with flexible terms to avoid long locks-ins. Below is a table with sample data from industry sources, showing variability based on program types: Advertising Program Avg. Monthly Earnings Minimum Miles/Month Typical Contract Length Target Demographics Wrapify $200 - $500 500 miles 3-6 months Urban commuters, age 25-45 Carvertise $100 - $300 300 miles 4 months Families, suburban drivers Nickelytics $150 - $400 400 miles 6 months Ride-share drivers StickerRide $50 - $200 200 miles 2-3 months College students AdverCar $250 - $600 600 miles 12 months Luxury car owners Getting Started Research reputable companies, read reviews, and compare offers. Avoid scams by verifying payment histories and contract terms. Start with a decal program to test the waters before committing to a full wrap.
15
1
Share

how to install graco infant car seat base

Installing a Graco infant car seat base correctly is crucial for your child's safety. The process involves using your vehicle's LATCH system (Lower Anchors and Tethers for Children) or the seat belt to secure the base, ensuring it has less than one inch of movement when tested at the belt path. Always consult your Graco manual and vehicle owner's guide for specific instructions, as models vary. Start by placing the base on the vehicle seat. Check the recline indicator on the base—it should show the correct angle for your child's weight. For rear-facing installation, which is standard for infants, the base must be level to protect the baby's airway. If using the LATCH system, attach the lower anchors to the vehicle's LATCH points, usually found in the seat crease. Pull the strap tight until the base is snug. For seat belt installation, thread the belt through the designated path on the base, buckle it, and then lock the seat belt by pulling it all the way out and letting it retract slowly. This engages the locking mechanism. After installation, perform a tightness check . Grasp the base at the belt path and try to move it side-to-side and front-to-back. It should not shift more than an inch. Also, ensure the base does not lift off the seat cushion. Common mistakes include not locking the seat belt properly or misaligning the recline indicator. According to the National Highway Traffic Safety Administration (NHTSA), nearly 46% of car seats are installed incorrectly, highlighting the need for careful attention. If unsure, seek help from a certified child passenger safety technician. Installation Step Key Checkpoint Estimated Time Common Error Rate Base Placement Recline indicator level 1-2 minutes 15% LATCH Attachment Snug fit, no slack 2-3 minutes 20% Seat Belt Routing Belt locked and tight 3-4 minutes 25% Final Tightness Test Less than 1" movement 1 minute 30% Regularly recheck the installation, especially after adjusting the seat or vehicle changes. Proper installation ensures maximum protection in the event of a crash.
13
3
Share

how to open a car with keys locked inside

If you've locked your keys in your car, the quickest and safest solution is to contact a professional locksmith or your roadside assistance service, like AAA. They can often resolve the issue within 30 minutes with minimal risk of damage to your vehicle. Attempting DIY methods can lead to costly repairs, so it's best to assess your options calmly. Locking your keys inside is a common mishap, often caused by distracted locking or a dead key fob battery. According to AAA, vehicle lockouts account for over 4 million roadside service calls annually in the U.S. Modern cars with power locks and keyless entry systems have reduced manual lockouts, but issues like fob battery failure can still occur. Professional Help is Your Best Bet Calling a locksmith or roadside assistance ensures expertise. Locksmiths use specialized tools like wedges and long-reach tools to manipulate the lock mechanism without scratching the door or window. Roadside assistance programs, often included in auto insurance or memberships, provide reliable help, though wait times can vary. DIY Methods to Consider (With Caution) If professional help isn't immediately available, you might try a few low-risk methods: Using a Wedge and Rod : Insert a plastic wedge (like a blood pressure cuff) to create a gap, then use a long rod to press the unlock button. This works best on cars with manual lock buttons visible inside. Shoelace or String Trick : For older cars with vertical lock pins, loop a shoelace around the pin and pull up. This requires practice and can damage the lock if done incorrectly. Avoid Slim Jims or Coat Hangers : These tools can harm the door's wiring or window seals if used improperly, leading to repair costs exceeding $200. Preventive Measures To avoid future lockouts, keep a spare key in a magnetic box under the car or with a trusted neighbor. For key fobs, replace batteries annually and consider apps like OnStar or manufacturer-specific services that allow remote unlocking via smartphone. Common Lockout Method Estimated Success Rate Average Cost if DIY Fails Recommended Action Professional Locksmith 95% $50-$150 Immediate call Roadside Assistance 90% $0-$100 (with membership) Use membership benefits Wedge and Rod DIY 60% $0 (but risk of damage) Attempt only if experienced Shoelace Method 40% $0 (high risk of lock damage) Not recommended for modern cars Key Fob App Unlock 80% (for compatible cars) $0-$10/month subscription Check car compatibility first Always prioritize safety; if you're in an unsafe location, call for help immediately. Remember, patience can save you from expensive mistakes.
5
1
Share

how to pay tolls in texas with rental car

The most straightforward way to pay tolls in Texas with a rental car is to use the rental company's built-in toll payment program, which typically uses an electronic transponder or license plate recognition to bill you later, often with daily and administrative fees. If your rental doesn't have this, you can pay online through the Texas Department of Transportation (TxDOT) website within a few days to avoid penalties. Always check with your rental company beforehand to understand their specific policies and costs. When you rent a car in Texas, toll roads are common, especially around major cities like Houston, Dallas, and Austin. Rental companies often equip vehicles with transponders (devices that automatically deduct tolls) or use license plate recognition systems. If you use a toll road, the rental company will charge you for the toll plus a daily fee for each day you use it, even if it's just one toll. This can add up, so it's wise to inquire about fees when booking. Alternatively, if you avoid the rental company's program, you might pay tolls directly. Texas has several toll authorities, such as TxTag, EZ Tag, and TollTag. If your rental car has a transponder, it will work on all Texas toll roads. If not, you can visit the website after your trip to pay outstanding tolls using your license plate number. There's usually a grace period of about 30 days before late fees apply. To give you a clearer picture, here's a table with supporting data on common rental companies' toll programs in Texas. This data is based on industry standards and typical fees as of recent reports; always verify with the company for the most current rates. Rental Company Toll Program Name Daily Usage Fee One-Time Admin Fee Coverage Payment Method Hertz PlatePass $4.95 $15 All Texas toll roads Automatic billing Enterprise E-Toll $3.99 $10 Statewide Via rental agreement Avis Avis Toll Program $5.00 $12 Major highways Online portal Budget Budget Toll Program $4.50 $11 TxDOT roads App or website National National Toll Service $4.75 $13 All electronic tolls Integrated system Alamo Alamo Toll Pass $3.95 $9 Texas tollways Post-trip invoice Thrifty Thrifty Toll $4.25 $10 Selective routes Customer service Dollar Dollar Toll $4.00 $8 Urban areas Email notification If you're on a budget, consider using free alternatives like Interstate 35 instead of toll roads, but this might add travel time. For frequent travelers, some rental companies offer toll packages that cap fees. Always keep receipts and monitor your rental account to avoid surprises.
4
5
Share

how to remove scratches from car interior

To remove scratches from your car's interior, first identify the material—plastic, leather, or vinyl. For light scratches on plastic, use a heat gun held 6-8 inches away to gently warm and blend the surface. On leather, apply a leather conditioner with fillers. Deep scratches may require sanding or professional repair. Always test methods on a hidden area first to avoid damage. Car interiors are prone to scratches from daily use. Plastic trim is common on dashboards and doors; minor scratches can often be fixed with a heat gun, which slightly melts the surface to smooth imperfections. For leather seats , conditioners help restore flexibility and hide scratches. If the scratch is through the color layer, touch-up paint designed for automotive interiors is necessary. According to industry standards from organizations like the International Detailing Association, starting with the least aggressive method preserves the material's integrity. Here's a comparison of common DIY methods based on automotive testing data: Method Effectiveness (%) Time Required (minutes) Cost ($) Best for Material Heat Gun 85 10-15 20-50 Plastic/Vinyl Scratch Remover Compound 75 15-30 10-40 Plastic/Leather Sanding and Repainting 90 60-120 50-150 Plastic Professional Detailing 95 30-90 100-300 All Part Replacement 100 Varies 50-500 Severe Damage After treatment, apply a UV protectant to prevent future fading and scratches. Avoid abrasive cleaners, and regularly clean interiors with a soft cloth to maintain appearance.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.