Which Year's Cars Comply with China IV Emission Standards?

1 Answers
VanXavier
07/30/25 4:44am
China IV emission standards apply to vehicles manufactured between 2011 and 2017. Below is relevant information about China IV emission standards: 1. Definition: China IV emission standards represent the national fourth-phase limits for motor vehicle pollutant emissions. Major automotive pollutants include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. These standards require controlling and reducing vehicle emissions below specified thresholds through technologies such as improved catalytic converter active layers, secondary air injection systems, and cooled exhaust gas recirculation systems. 2. Existing Issues: While promoting environmental protection and energy conservation remains a key national policy, significant challenges to corporate interests inevitably encounter resistance. As state-owned enterprises, Sinopec and PetroChina cannot be effectively constrained by governmental "standards". Consequently, emission control pressures primarily target more market-oriented automobile manufacturers, which explains why the automotive industry bears disproportionate responsibility for emission compliance.
Was this review help?
2
3
Share
More Forum Discussions

What is the method to check tire pressure on a Mercedes-Benz C-Class?

Mercedes-Benz C-Class's tire pressure monitoring system is displayed on the multifunction display screen, with sensors installed inside all four tires. If the display does not appear while driving, press the up or down arrow button to select tire pressure, then press the OK button to display each tire's pressure on the multifunction screen. A warning will be issued if the pressure is too high or too low, based on the safe tire pressure set by the owner. Hazards of overinflated or underinflated tires: For tires, pressure should neither be too high nor too low. Overinflation reduces the tire's contact area with the ground, leading to poor grip and affecting vehicle handling and driving stability. Underinflation can cause wave-like deformation during high-speed driving, shortening tire lifespan and increasing the risk of blowouts. Standard tire pressure introduction: According to the international GBT2978-2008 standard requirements, different tire pressures are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: Should not exceed 3.5bar.
15
5
Share

Why does the Civic lack power when reversing?

Reversing power deficiency is due to the CVT electronic clutch requiring time to engage in reverse gear and not being able to engage quickly. Methods of reversing: Reversing methods include four types: turning around and reversing into a parking space, garage reversing, turning while reversing, and shifting while reversing. A new method of reversing into a parking space has been introduced, which is the automatic parking technology. By pressing a button, the car is automatically driven into the garage. The automatic parking function does not require manual control and automatically assists the driver in parking. By activating the car's automatic parking button, reversing into a parking space can be completed automatically. Different systems use different methods to detect objects around the car. Sensors are installed on the bumpers around the car, and by sending and receiving signals, the car's onboard computer automatically analyzes the position of obstacles and drives the car into the parking space. Precautions for reversing: When reversing into a parking space, it is necessary to pay attention to the situation behind the car. The status behind the car can be observed with the help of a reversing camera to avoid scraping during reversing. Additionally, it is important to reduce the speed when reversing.
9
2
Share

What is the maintenance method for the Xiali N7?

You can perform car maintenance yourself by purchasing the necessary items according to the instructions in the maintenance manual. However, if the car is still under warranty, you must go to a service station because if you perform maintenance yourself, the service station will not provide compensation if any issues arise later. Maintaining the wiper blades: Wiper blades are particularly prone to wear and tear. They can be replaced at external beauty shops, which is much cheaper than at 4S stores, and the quality is also good. Maintaining the air filter: During regular use, frequently open the front hood, take it out, and blow it clean. The air filter doesn’t need to be replaced even after several oil changes, especially in cities with relatively light air pollution.
13
3
Share

What is the reason for the rear wiper of BMW X5 not spraying water?

WU_BA_QI_CHE_PIC_PLACE_HOLDER The wiper not spraying water is caused by the filter screen on the motor being clogged with scale or decomposed matter. Usage of the wiper: By pushing the control lever up and down, you can control the wiper's operation (intermittent, off, auto, and high/low speed). If in the auto adjustment state, you can change the sensitivity of the rain sensor-controlled wiper by turning the adjustment knob, thereby adjusting the wiper's frequency. As for the front windshield washing, simply pull the control lever lightly toward the driver, and the windshield washer and wiper will work simultaneously. Precautions when using the wiper: If you find that the washer fluid is not spraying out but the wiper is working, do not continue to press the button. At this time, check if the washer fluid warning light is on. If it is, you should promptly refill the washer fluid.
11
5
Share

What is the difference between Audi A4 4WD and 2WD?

Four-wheel drive (4WD) and two-wheel drive (2WD) vehicles differ in the number of driven wheels. A 2WD vehicle has only two driven wheels, while a 4WD vehicle has four. Meaning of 2WD: Two-wheel drive means that only two wheels are driven, typically either the front wheels (front-wheel drive) or the rear wheels (rear-wheel drive). In contrast, four-wheel drive means all four wheels can be driven simultaneously, with both the front and rear wheels providing power. Four-wheel drive (4WD): Four-wheel drive offers advantages when driving on poor road conditions. For example, if the front wheels lose traction, the rear wheels can still drive the vehicle, making it suitable for off-road use. However, 4WD consumes more fuel. On the other hand, 2WD is more suitable for city commuting, offering lower fuel consumption compared to 4WD, though its off-road performance is inferior to that of 4WD.
20
5
Share

Does the Mercedes S350 require lift mode for tire replacement?

The Mercedes S350 does not require lift mode for tire replacement. Tires must be replaced when reaching the wear limit: The tire wear has reached the wear limit indicator. There are small triangular patterns along the sidewall and the edge of the tread. Moving horizontally from any of these triangles to the tread pattern, you will find small raised bars within the tread grooves, which are the safety indicators. If the tread wears down to this point, it means the tires should be replaced. Replace tires based on aging condition: Check the aging condition of the tires. If there are many cracks but they do not affect normal use, the tires can still be used. However, if the cracks are deeper than 3 millimeters, the tires need to be replaced. Tires with tread deformation or bead damage must be replaced: Tires with tread deformation or bead damage, tires that have been driven flat causing sidewall damage, or tires corroded by chemicals should not be used.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.