Which year model is the Focus caf7163a4?

2 Answers
LaPresley
07/29/25 4:10am
The Focus caf7163a4 is the 2021 year model. Here is more information about the Focus: 1. Focus RS: The Focus RS is a new generation high-performance sedan developed based on the facelifted European version of the Focus. The all-new Ford Focus RS will exclusively feature Michelin tires. Among them, the Michelin Pilot Super Sport (specification 235/35/19) is its standard tire, while the Michelin Pilot Sport Cup 2 (specification 235/35/19), known for its outstanding track performance, is available as an optional tire. 2. Focus RS engine: The large intercooler air intake of the Focus RS runs from the top of the bumper down to the front lip, adorned with black metal mesh. The fog lights are directly embedded at the front of the front fenders without any decoration. The engine hood features two additional heat dissipation vents, and the vents at the rear of the front fenders indicate that the vehicle will have a powerful braking system.
Was this review help?
7
5
Share
VonGabriella
08/12/25 7:56am
When dealing with the VIN of a Focus, I noticed that in codes like CAF7163A4, the tenth character 'A' typically represents the year 2010. This car is likely a 2010 Focus third-generation model, a time when the Focus placed greater emphasis on fuel efficiency in its design. I recommend checking the complete Vehicle Identification Number on the lower corner of the windshield or the label inside the door to confirm the year. The year is crucial for maintenance; the 2010 Focus engine may have specific aging issues that require regular inspections, such as a cooling system prone to leaks. I've seen similar cases in the garage and suggest using the official Ford app to input the full code for verification to avoid misjudgment, as codes may vary slightly by region.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to adjust the time on Buick GL8?

When the ignition switch is in the ACC (Accessory) or ON position, the digital clock displays the time. The digital clock has two adjustment buttons. The specific methods are as follows: 1. H: Hour button. To advance the time by more than 1 hour, press and hold the H button until the correct time is reached. 2. M: Minute button. To advance the time by 1 minute, press the M button. To advance the time by more than 1 minute, press and hold the M button until the correct time is reached. 3. S: Set button. To reset the time to the nearest full hour, press the S button. For example, if you press this button between 8:00 and 8:29, the time display will be reset to 8:00.
12
2
Share

How to Remove the Dashboard of a Lavida?

Here is the method for disassembling the dashboard of a Volkswagen Lavida: 1. Remove the center armrest box. 2. Remove the center air vent. 3. Remove the dashboard. 4. First, remove the three switches. 5. There are bolts behind it. 6. Remove the instrument panel. Here is additional information about the dashboard of a Volkswagen Lavida: 1. Its function is to install instruments or related devices, warning lights, providing information or signals to the user. 2. The dashboard can also be equipped with a lighting system or connected to a control panel. 3. The car dashboard mainly includes the instrument panel and the center console, consisting of many components, primarily shaped like a T, with the main function of adjusting the interior space.
11
2
Share

Is It Normal for a Car's Rear Wheels to Toe Out?

It is normal for a car's rear wheels to toe out, and the specific details are as follows: 1. Toe-out of the rear wheels refers to negative camber, a tire configuration commonly seen in sports cars and race cars. With numerous curves on the track, race cars adopt this toe-out structure to achieve better grip. 2. When the car is under load, the toe-out rear wheels ensure a larger contact area with the ground after the wheels tilt. 3. Many cars exhibit toe-out rear wheels when traveling at high speeds or under heavy loads. The increased ground contact area from the toe-out rear tires enhances cornering limits and handling. Performance-oriented vehicles often adopt this toe-out design to improve handling capabilities.
7
1
Share

What are the steps for removing and installing the fuel tank motor of the A6L?

Steps for removing and installing the A6L fuel tank motor: Open the trunk and remove the decorative cover on the right side. The two bolts extending from the white motor are called external hexagons; use an appropriately sized micro socket to remove them, then disconnect the wiring harness, and finally reinstall it. Below is some relevant information about the Audi A6L: 1. The overall appearance of the new-generation Audi A6L hasn't changed much, but it features a more novel and youthful design based on the original model, adopting a new family-style front fascia that closely resembles the current A8L. From certain angles, it can even be difficult to distinguish between the two. Like the A8L, the top-tier A6L model also comes with stylish full-LED headlights. 2. The interior offers a variety of optional colors and materials, paired with different genuine leather seats. After being redesigned, all equipment features sharper shapes and interfaces, giving the overall style a more youthful feel. 3. The new MMI system includes a retractable display and adds a touchpad for handwriting input. The top-tier model also includes a night vision system to enhance safety for both the vehicle and pedestrians. In addition to offering spacious rear seating, it is equipped with a rich array of audio-visual entertainment systems.
16
4
Share

What is the difference between car lights with and without lenses?

Car lights with and without lenses have the following differences: Difference one: Lights without lenses have a more scattered effect and are more glaring, which can affect the driver's visual experience. Lights with lenses can focus the light, achieving the best illumination effect. Difference two: Under the same light source, lights with lenses have an illumination distance, width, and brightness that are 3-5 times greater than those without lenses. Lights without lenses have limited illumination distance and width, posing a safety hazard while driving. Difference three: Generally, low beams are equipped with lenses, while high beams are not. The reason is that low beams are most commonly used in urban roads, whereas high beams are rarely used.
1
4
Share

What are the differences between domestic cars and joint venture cars?

The main differences between domestic cars and joint venture cars are as follows: Difference 1: The difference in investment method: Domestic cars are designed and manufactured by China itself, while joint venture cars are mostly produced through cooperation where the Chinese side provides land, factory usage rights, and capital, and the foreign investors contribute brand and technology. Difference 2: Comparing domestic cars and joint venture cars of the same price range and level, domestic cars are more richly equipped and better suited to the usage habits of Chinese people. Moreover, ESP is a standard feature in low-end domestic cars, but it is not available in low-end joint venture cars. Difference 3: Comparing joint venture cars and domestic cars at the same price point, taking cars below 100,000 RMB as an example, the quality of joint venture cars below 100,000 RMB is hardly guaranteed, and their handling is not very good. Joint venture cars focus more on profits, thus they tend to control costs more strictly. However, domestic cars below 100,000 RMB offer better quality and operability compared to joint venture cars. Looking at mid-to-low-end cars priced between 100,000-150,000 RMB, domestic cars perform better than joint venture cars.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.